Grey 3/4 ton Hubcap - WIW? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 06-04-2023, 07:43 PM

Have seen this style cap in both a white/black paint combo and in the stainless/black combo. Never ran across this style cap with what looks to be a factory(?) grey paint. No evidence of a re-paint, shows normal wear, light scale on the back side, no dents, some very minor dings. Also the center protrudes out some what, is not indented or pushed in like normally seen. Tried to show in the side on pic but hard to pick it out. Original application and a value would be appreciated.

**Ironhorse** · 06-07-2023, 06:35 AM

Any body with info or knowledge on what appears to be a factory 3/4 ton paint CONVEX or "outie" center?

**too much stuff** · 06-07-2023, 09:55 PM

I think that would be a 69 cap. 1/2 or 3/4 ton...
I haven't noticed much value over the white ones unless they are really nice.

**Ironhorse** · 06-08-2023, 06:30 AM

Thanks for the reply Eric. The pictured cap is a 12'' 3/4 ton and altho the paint shows some wear the metal body of the cap is in really good condition. No splits on the edges, very minor dings or nicks on the front. Being an "outie" on the center portion one could most likely convert it to an '' innie '' with a bit of time and effort. Idea as to value? Does need a repaint for nice but as is it's good for a daily driver truck.

06-04-2023, 07:43 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Grey 3/4 ton Hubcap - WIW? Have seen this style cap in both a white/black paint combo and in the stainless/black combo. Never ran across this style cap with what looks to be a factory(?) grey paint. No evidence of a re-paint, shows normal wear, light scale on the back side, no dents, some very minor dings. Also the center protrudes out some what, is not indented or pushed in like normally seen. Tried to show in the side on pic but hard to pick it out. Original application and a value would be appreciated. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

06-07-2023, 06:35 AM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Grey 3/4 ton Hubcap - WIW? Any body with info or knowledge on what appears to be a factory 3/4 ton paint CONVEX or "outie" center? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

06-07-2023, 09:55 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Grey 3/4 ton Hubcap - WIW? I think that would be a 69 cap. 1/2 or 3/4 ton... I haven't noticed much value over the white ones unless they are really nice. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-08-2023, 06:30 AM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Grey 3/4 ton Hubcap - WIW? Thanks for the reply Eric. The pictured cap is a 12'' 3/4 ton and altho the paint shows some wear the metal body of the cap is in really good condition. No splits on the edges, very minor dings or nicks on the front. Being an "outie" on the center portion one could most likely convert it to an '' innie '' with a bit of time and effort. Idea as to value? Does need a repaint for nice but as is it's good for a daily driver truck. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.