What Quadrajet came on your 1968, 327 equipped C30? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sixty8HDC30 · 11-28-2023, 03:25 PM

I'm curious what is the 7 digit number on the drivers side of your quadrajet carburetor that came on your 1968 327? c10-c30, I'm curious about all of them.

Mine is 7028207 which was what would have come on a 1968 327 equipped corvette. Would this carb have also been attached to some of our trucks too or did someone swap the carb in my trucks past?

According to quadrajetpower dot com the 7028207 would have come with 71 jets and 46b primary rods, when I pulled my 7028207 apart, I found 66 jets with 37b primary rods.

The 1968 corvette with this carb and 327 was a 300hp combination. My 1968 327 was I believe advertised as a 240hp combination.
Could the difference in power be the heads and jetting? I believe my carburetor is original to my truck, what do you think?

**Steeveedee** · 11-28-2023, 04:25 PM

Cam, distributor curve/vacuum advance, heads, compression ratio, likely all different. And the carb would be different in calibration, though I couldn't give you specifics.

Lee H · 11-28-2023, 05:12 PM

7028213 for Chevrolet 68, 327/350 full size and truck MT. Same 71 jet and 46 main rod. I can find no other listing for a small block 68 truck with a manual transmission.

sixty8HDC30 · 11-28-2023, 05:34 PM

Quote:

Originally Posted by Lee H

7028213 for Chevrolet 68, 327/350 full size and truck MT. Same 71 jet and 46 main rod. I can find no other listing for a small block 68 truck with a manual transmission.

Interesting! So it seems someone has done some swapping of carbs and swapping of internal parts on mine. Nice of that person to use the correct year carb and apparently a fairly sought after one by the Corvette crowd.

I'm in the middle of a rebuild of my quadrajet(its taken apart on my work bench and there is a rebuild kit on the mail), which is where these questions are coming from.

**LockDoc** · 11-28-2023, 07:09 PM

-
My all original '68 C-20 CST had a 327 & TH400. My research indicated that the correct carb would be #7028212. Even numbers were for auto transmission vehicles and the odd numbers were for manual.

LockDoc

sixty8HDC30 · 11-29-2023, 03:36 PM

Quote:

Originally Posted by LockDoc

-
My all original '68 C-20 CST had a 327 & TH400. My research indicated that the correct carb would be #7028212. Even numbers were for auto transmission vehicles and the odd numbers were for manual.

LockDoc

Thats a great reference sheet to have on hand! Thanks

**LockDoc** · 11-29-2023, 05:26 PM

Quote:

Originally Posted by sixty8HDC30

Thats a great reference sheet to have on hand! Thanks

No problem.

LockDoc

xs-cash · 03-20-2024, 06:36 PM

Quote:

Originally Posted by LockDoc

-
My all original '68 C-20 CST had a 327 & TH400. My research indicated that the correct carb would be #7028212. Even numbers were for auto transmission vehicles and the odd numbers were for manual.

LockDoc

Great information

**Steeveedee** · 03-20-2024, 06:52 PM

Yes, according to the '68 Chassis Overhaul Manual it is 7028213, for a manual trans. Looking at a rebuilder's site can be misleading.

**1970cstblazer** · 03-21-2024, 11:40 AM

Quote:

Originally Posted by LockDoc

-
My all original '68 C-20 CST had a 327 & TH400. My research indicated that the correct carb would be #7028212. Even numbers were for auto transmission vehicles and the odd numbers were for manual.

LockDoc

The odd/even rule of thumb for transmission type isn't always the case. I have the original Q-JET from my grandfather's 1970 K20 350 4 speed, which is 7040208.

68Gold/white · 11-29-2023, 02:56 PM

Quote:

Originally Posted by sixty8HDC30

Interesting! So it seems someone has done some swapping of carbs and swapping of internal parts on mine. Nice of that person to use the correct year carb and apparently a fairly sought after one by the Corvette crowd.

I'm in the middle of a rebuild of my quadrajet(its taken apart on my work bench and there is a rebuild kit on the mail), which is where these questions are coming from.

I was wondering where you got your carb kit???

I have knowledge of Quadrajets but, cannot answer your question. I'd say it's unlikely a Corvette carb is exactly the same as on a 1 ton.

I am certain that Cliff Ruggles can answer your question (Cliffshighperformance,com)

You could also call Quarajet Power and ask them....

sixty8HDC30 · 11-29-2023, 03:33 PM

Quote:

Originally Posted by 68Gold/white

I was wondering where you got your carb kit???

I have knowledge of Quadrajets but, cannot answer your question. I'd say it's unlikely a Corvette carb is exactly the same as on a 1 ton.

I am certain that Cliff Ruggles can answer your question (Cliffshighperformance,com)

You could also call Quarajet Power and ask them....

I ordered my kit through quadrajetpower.

**special-K** · 11-29-2023, 07:58 AM

I think you carburetor is original to your truck. I have the same carb I bought from a member here from his '68 truck with 327. I bought it because it had the same number as the '68 Vette w/327/300hp

sixty8HDC30 · 11-29-2023, 03:34 PM

Quote:

Originally Posted by special-K

I think you carburetor is original to your truck. I have the same carb I bought from a member here from his '68 truck with 327. I bought it because it had the same number as the '68 Vette w/327/300hp

Interesting! Do you happen to know if the truck it came off of was a 1ton or not?

**special-K** · 11-30-2023, 09:12 AM

Quote:

Originally Posted by sixty8HDC30

Interesting! Do you happen to know if the truck it came off of was a 1ton or not?

I don't think it was but I know it was a pickup, so I think not a 1t

**HO455** · 11-30-2023, 10:17 AM

Quote:

Originally Posted by sixty8HDC30

I'm curious what is the 7 digit number on the drivers side of your quadrajet carburetor that came on your 1968 327? c10-c30, I'm curious about all of them.

Mine is 7028207 which was what would have come on a 1968 327 equipped corvette. Would this carb have also been attached to some of our trucks too or did someone swap the carb in my trucks past?

According to quadrajetpower dot com the 7028207 would have come with 71 jets and 46b primary rods, when I pulled my 7028207 apart, I found 66 jets with 37b primary rods.

The 1968 corvette with this carb and 327 was a 300hp combination. My 1968 327 was I believe advertised as a 240hp combination.
Could the difference in power be the heads and jetting? I believe my carburetor is original to my truck, what do you think?

The Corvette 327 had a different camshaft as well as a higher compression ratio. The jetting of the carburetor was different due to the increased VE of the components used on the Corvette 327. The truck 327 doesn't flow as much air through the carburetor thus the carb has smaller jetting.

The top dog 327 was the L79 365 hp option. Here is some information on what the L79 and L76 engines were delivered with.

https://www.speedwaymotors.com/the-t...d-ideas/120143

sixty8HDC30 · 03-20-2024, 05:06 PM

Bumping this because I ran across this page that seems to indicate that this carb could have come on a 1968 chevy or gmc truck.

https://www.carburetion.com/CarbNumb...Number=7028207

11-28-2023, 03:25 PM	#1
sixty8HDC30 Registered User Join Date: Feb 2023 Location: Nunya Bizz Posts: 88	What Quadrajet came on your 1968, 327 equipped C30? I'm curious what is the 7 digit number on the drivers side of your quadrajet carburetor that came on your 1968 327? c10-c30, I'm curious about all of them. Mine is 7028207 which was what would have come on a 1968 327 equipped corvette. Would this carb have also been attached to some of our trucks too or did someone swap the carb in my trucks past? According to quadrajetpower dot com the 7028207 would have come with 71 jets and 46b primary rods, when I pulled my 7028207 apart, I found 66 jets with 37b primary rods. The 1968 corvette with this carb and 327 was a 300hp combination. My 1968 327 was I believe advertised as a 240hp combination. Could the difference in power be the heads and jetting? I believe my carburetor is original to my truck, what do you think? __________________ ____________________________________

11-28-2023, 04:25 PM	#2
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,790	Re: What Quadrajet came on your 1968, 327 equipped C30? Cam, distributor curve/vacuum advance, heads, compression ratio, likely all different. And the carb would be different in calibration, though I couldn't give you specifics. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

11-28-2023, 05:12 PM	#3
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,148	Re: What Quadrajet came on your 1968, 327 equipped C30? 7028213 for Chevrolet 68, 327/350 full size and truck MT. Same 71 jet and 46 main rod. I can find no other listing for a small block 68 truck with a manual transmission. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

11-28-2023, 07:09 PM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,896	Re: What Quadrajet came on your 1968, 327 equipped C30? - My all original '68 C-20 CST had a 327 & TH400. My research indicated that the correct carb would be #7028212. Even numbers were for auto transmission vehicles and the odd numbers were for manual. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-20-2024, 06:52 PM	#9
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,790	Re: What Quadrajet came on your 1968, 327 equipped C30? Yes, according to the '68 Chassis Overhaul Manual it is 7028213, for a manual trans. Looking at a rebuilder's site can be misleading. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

11-29-2023, 07:58 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: What Quadrajet came on your 1968, 327 equipped C30? I think you carburetor is original to your truck. I have the same carb I bought from a member here from his '68 truck with 327. I bought it because it had the same number as the '68 Vette w/327/300hp __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-20-2024, 05:06 PM	#17
sixty8HDC30 Registered User Join Date: Feb 2023 Location: Nunya Bizz Posts: 88	Re: What Quadrajet came on your 1968, 327 equipped C30? Bumping this because I ran across this page that seems to indicate that this carb could have come on a 1968 chevy or gmc truck. https://www.carburetion.com/CarbNumb...Number=7028207 __________________ ____________________________________



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.