PA 1968 C20 partout - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Burnsy01** · 03-02-2024, 06:16 PM

This ones a little rough folks. 68 C20 , 250 3 on the tree. Anything you can see is up for grabs but to hit the big points-

250 Motor/ Tranny- supposedly ran before they pulled the carb. $300

HO rear end- unknown ratio but it isnt frozen up. $150

Tailgate- rough , slightly bent on the inside, and rusty on the bottom seam but would be good for a beater truck or a bench maybe??? $125

Hood- Inside structure is actually in really good shape, starting to have some rust issues. Is dented, once again good for a beater $50

Hood hinges- good shape $65+ shipping

Radio dash cut $80+ shipping

Located in Conneaut Lake pa, many other parts available

**michael bustamante** · 03-04-2024, 10:51 AM

dang i could use that rear end too..
price and condition of fenders?

**Burnsy01** · 03-04-2024, 11:06 AM

Quote:

Originally Posted by michael bustamante

dang i could use that rear end too..
price and condition of fenders?

Fenders are super rough, they have about 2" of bondo on them lol. I do have a repop 67 driverside fender and a decent 68 Pass fender.

**michael bustamante** · 03-04-2024, 01:22 PM

damn thats a bit too far for me to go for that rear end.. ugh,,,,,

**Burnsy01** · 03-04-2024, 01:23 PM

Quote:

Originally Posted by michael bustamante

damn thats a bit too far for me to go for that rear end.. ugh,,,,,

I can ship via freight but it won’t be cheap

**michael bustamante** · 03-04-2024, 02:01 PM

itd be miserable to freight that heavy rear end, and probably about 600.00 to freight it. but thank you

**Rods** · 03-04-2024, 06:20 PM

How much for the lic plate ?

**Burnsy01** · 03-05-2024, 09:24 AM

Quote:

Originally Posted by Rods

How much for the lic plate ?

Shes kinda beat lol. Ill do it for $20 shipped

**Rods** · 03-05-2024, 10:12 AM

Quote:

Originally Posted by Burnsy01

Shes kinda beat lol. Ill do it for $20 shipped

We will take it…….

PM sent

**michael bustamante** · 03-04-2024, 06:45 PM

how much for them rear bumper brackets?

**Burnsy01** · 03-05-2024, 09:25 AM

Quote:

Originally Posted by michael bustamante

how much for them rear bumper brackets?

$50 shipped?

**michael bustamante** · 03-05-2024, 10:37 AM

Quote:

Originally Posted by Burnsy01

$50 shipped?

sounds decent.. if you could send a pic when you can... just wanna mke sure theyre the right ones and nor rusted thru and such

**Burnsy01** · 03-05-2024, 10:40 AM

Quote:

Originally Posted by michael bustamante

sounds decent.. if you could send a pic when you can... just wanna mke sure theyre the right ones and nor rusted thru and such

Yup no problem if you want to PM me your number I can send pics over at noon.

Thanks!
Nick

**pjmoreland** · 03-05-2024, 12:13 PM

What's the condition of the front turn signal light housings?

jaybatta · 03-05-2024, 11:57 PM

I don’t see them, but is there any headlight eyebrow trim?

Thanks

**Burnsy01** · 03-10-2024, 11:44 PM

Quote:

Originally Posted by jaybatta

I don’t see them, but is there any headlight eyebrow trim?

Thanks

No headlight trim Sorry

Nick

D-n-Tyke · 03-11-2024, 01:35 AM

If it is in good solid shape and you are interested in cutting pieces out of the cab I am looking for the are of the inner cowl by where the outter cowl bolts on.

**Burnsy01** · 03-11-2024, 07:44 AM

Quote:

Originally Posted by D-n-Tyke

If it is in good solid shape and you are interested in cutting pieces out of the cab I am looking for the are of the inner cowl by where the outter cowl bolts on.

Sure, Passenger side?

D-n-Tyke · 03-11-2024, 11:43 AM

Quote:

Originally Posted by Burnsy01

Sure, Passenger side?

Yes passenger side.Cut out as shown or even maybe slightly bigger.

68Gold/white · 03-06-2024, 03:34 PM

Man, that would make a cool patina build!!!

**chev-obsession** · 03-07-2024, 01:35 AM

Are the hood latch bolts the original 12 point heads? If so, price ? Assuming they aren’t rusted to the point the threads are stripped when removed.

**Burnsy01** · 03-10-2024, 11:43 PM

Quote:

Originally Posted by chev-obsession

Are the hood latch bolts the original 12 point heads? If so, price ? Assuming they aren’t rusted to the point the threads are stripped when removed.

No 12 points sorry

bddcustoms · 03-21-2024, 09:55 AM

Looking 67/68 for side molding trim pieces:
both doors
both cab corners
both bed sides
one rear wheel arch

Let me know if you can help

Quote:

Originally Posted by Burnsy01

This ones a little rough folks. 68 C20 , 250 3 on the tree. Anything you can see is up for grabs but to hit the big points-

250 Motor/ Tranny- supposedly ran before they pulled the carb. $300

HO rear end- unknown ratio but it isnt frozen up. $150

Tailgate- rough , slightly bent on the inside, and rusty on the bottom seam but would be good for a beater truck or a bench maybe??? $125

Hood- Inside structure is actually in really good shape, starting to have some rust issues. Is dented, once again good for a beater $50

Hood hinges- good shape $65+ shipping

Radio dash cut $80+ shipping

Located in Conneaut Lake pa, many other parts available

**Burnsy01** · 03-21-2024, 10:07 AM

Quote:

Originally Posted by bddcustoms

Looking 67/68 for side molding trim pieces:
both doors
both cab corners
both bed sides
one rear wheel arch

Let me know if you can help

Hey! I have some of that. Check this thread for pictures of what I have.

https://67-72chevytrucks.com/vboard/...d.php?t=850480

bddcustoms · 03-21-2024, 11:35 AM

Just PM'd you. Let me know

Thx
DTT

03-02-2024, 06:16 PM	#1
Burnsy01 Chevy Freak Join Date: Aug 2019 Location: Conneaut Lake , Pennsylvania Posts: 225	1968 C20 partout This ones a little rough folks. 68 C20 , 250 3 on the tree. Anything you can see is up for grabs but to hit the big points- 250 Motor/ Tranny- supposedly ran before they pulled the carb. $300 HO rear end- unknown ratio but it isnt frozen up. $150 Tailgate- rough , slightly bent on the inside, and rusty on the bottom seam but would be good for a beater truck or a bench maybe??? $125 Hood- Inside structure is actually in really good shape, starting to have some rust issues. Is dented, once again good for a beater $50 Hood hinges- good shape $65+ shipping Radio dash cut $80+ shipping Located in Conneaut Lake pa, many other parts available Attached Images __________________ Nick 71 K20 5.9 p pump cummins (in progress) 68 Camaro 454BBC 86 Camaro 5.3LS turbo

03-04-2024, 10:51 AM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,875	Re: 1968 C20 partout dang i could use that rear end too.. price and condition of fenders? __________________ 1967custom

03-04-2024, 01:22 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,875	Re: 1968 C20 partout damn thats a bit too far for me to go for that rear end.. ugh,,,,, __________________ 1967custom

03-04-2024, 02:01 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,875	Re: 1968 C20 partout itd be miserable to freight that heavy rear end, and probably about 600.00 to freight it. but thank you __________________ 1967custom

03-04-2024, 06:20 PM	#7
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,488	Re: 1968 C20 partout How much for the lic plate ? __________________ Az

03-04-2024, 06:45 PM	#10
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,875	Re: 1968 C20 partout how much for them rear bumper brackets? __________________ 1967custom

03-05-2024, 12:13 PM	#14
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,096	Re: 1968 C20 partout What's the condition of the front turn signal light housings?

03-05-2024, 11:57 PM	#15
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 841	Re: 1968 C20 partout I don’t see them, but is there any headlight eyebrow trim? Thanks __________________ Joe 1968 K20 1970 K20 Semper Fi

03-11-2024, 01:35 AM	#17
D-n-Tyke Registered User Join Date: Aug 2016 Location: El Cajon, CA Posts: 292	Re: 1968 C20 partout If it is in good solid shape and you are interested in cutting pieces out of the cab I am looking for the are of the inner cowl by where the outter cowl bolts on. Attached Images

03-06-2024, 03:34 PM	#20
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,439	Re: 1968 C20 partout Man, that would make a cool patina build!!!

03-07-2024, 01:35 AM	#21
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,514	Re: 1968 C20 partout Are the hood latch bolts the original 12 point heads? If so, price ? Assuming they aren’t rusted to the point the threads are stripped when removed. __________________ 1965 c/10 swb 1969 c/10 lwb

03-21-2024, 11:35 AM	#25
bddcustoms Registered User Join Date: Apr 2009 Location: Bowie, Maryland Posts: 80	Re: 1968 C20 partout Just PM'd you. Let me know Thx DTT __________________ broke d!@k dog Garage 1969 C20 - Project: "Big Sexy" [http://67-72chevytrucks.com/vboard/s...d.php?t=454894] 2003 'Burban - [Big Pop's daily driver] 1969 350/350 Stingray - [as soon as the economy turns...] 1939 Chevy Roadster Pick Up - Project: "Pre-School" (searching now)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.