Decarbonization in the Ultrasonic Cleaner - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**truckster** · 12-06-2024, 07:45 PM

I have a high-pressure air compressor (4500 PSI) and oil migrated into the cylinders and carbonized on the reed valves and valve bodies. I'm planning to put it in my ultrasonic cleaner with some Oil Eater added and see how that turns out. If that doesn't work, do you have any other suggestions?

**mongocanfly** · 12-07-2024, 06:45 PM

I've been impressed with my US cleaner.but I have had to help it out on some stubborn grime..
I let it soak overnight and then brushed with a brass "toothbrush"
Sometimes it works great, sometimes it needs help

**HO455** · 12-07-2024, 07:24 PM

I've had good luck using Carbon Off to clean pistons and engine parts with burnt oil on them. It works great on the wife's gas range but she made buy my own can for the shop.

**truckster** · 12-09-2024, 02:15 PM

Thanks for the replies.

12-06-2024, 07:45 PM	#1
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,976	Decarbonization in the Ultrasonic Cleaner I have a high-pressure air compressor (4500 PSI) and oil migrated into the cylinders and carbonized on the reed valves and valve bodies. I'm planning to put it in my ultrasonic cleaner with some Oil Eater added and see how that turns out. If that doesn't work, do you have any other suggestions? __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

12-07-2024, 06:45 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Decarbonization in the Ultrasonic Cleaner I've been impressed with my US cleaner.but I have had to help it out on some stubborn grime.. I let it soak overnight and then brushed with a brass "toothbrush" Sometimes it works great, sometimes it needs help __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

12-07-2024, 07:24 PM	#3
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,353	Re: Decarbonization in the Ultrasonic Cleaner I've had good luck using Carbon Off to clean pistons and engine parts with burnt oil on them. It works great on the wife's gas range but she made buy my own can for the shop. Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

12-09-2024, 02:15 PM	#4
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,976	Re: Decarbonization in the Ultrasonic Cleaner Thanks for the replies. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.