Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
01-15-2004, 09:30 PM | #1 |
Registered User
Join Date: Jul 2003
Location: Franklin, NE
Posts: 387
|
Added full gauges to 79 Chevy truck
Other than changing the instrument cluster, what else needs to be changed on a 79 Chevy truck to go from idiot lights to full instruments? The truck is a 6 cylinder, 3 speed on the column.
Thanks Doug |
01-15-2004, 09:45 PM | #2 |
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Senders, and maybe the wiring harness, not too sure though.
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
01-15-2004, 10:42 PM | #3 |
You get what you pay for
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
|
When I changed a van over from lights to gauges, I had to change the senders. The plugs on the harness are the same and will plug up to the light harness. The wiring is the same color, but the wires are in different locations in the plug. What I did was to make sure you get the plug from the donor truck. Then cut your old one off and wire the new one color to color.
Worked for me.
__________________
Mike 1985 Chevy C-10 |
01-15-2004, 11:16 PM | #4 |
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Ah, knew there was some rewiring to do
Thanks Mike
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
Bookmarks |
|
|