|
|
|
02-19-2004, 07:41 AM
|
#1 |
|
Registered User
Join Date: Feb 2004
Location: Sherman, TX
Posts: 5
|
new member
I just found this site and thought I would join. I found this site because I was looking for information on a truck I was considering buying. It is a 71 short wide, has decent red paint, 5 lug, disc brakes, and AC. The guy went down to $4000, so I took it for a test drive, it drove fine, had a little play in the steering, and the gears are too low, probably 4.11 or something similar. Now the bad parts. The floor pans are perfect, but the cab corners are rusted out, and had been bondoed over before the paint. One fender corner and one door were the same. Also the truck has a plastic bed liner installed, but I looked in the fenderwell and saw the bed and part of the fenderwells had rusted away. I expected most of this on a truck this old but the thing that keeps me from buying is the truck has roll pans on it and the frame rails were cut to make room for the roll pans. Anyone think this is a bad reason to pass on this truck? I am a fair welder but do not want to have to find a donor frame and weld the frame on this truck just to put bumpers on it, the roll pans were poorly done. If anyone is interested it is at A and F motors in Whitewright Texas. Email me and I will get the phone number from home. So I am still looking for a 67-72 short wide in the Dallas area if anyone knows of anything.
Also a little more about me. I live north of Dallas, have a 66 mustang project, its a basket case but a good start. Also have a slick looking 86 short wide. The motor and transmission were going out and instead of replacing the drive train I bought a 2002 Trans Am. If anyone in the north Texas area has a project going let me know, I'll bring the welder and plasma cutter. Thanks. |
|
|
|
02-19-2004, 08:12 AM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Doug, welcome to the board, you have stumbled on the best place for info on these trucks.
As for the 71, I would personally pass. I know 4 grand isn't a whole lot, however, i would expect moret han a bondo wagon for that price. Roll pans suck too. |
|
|
|
|
02-19-2004, 08:58 AM
|
#3 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Welcome to the board, Doug!
I am with Longhorn on the truck question. You have named off some serious issues and there are probably more. I would suggest that you keep looking as real decent trucks are available. Jim |
|
|
|
|
02-19-2004, 09:02 AM
|
#4 |
|
Is a bullfrog waterproof?
Join Date: Nov 2000
Location: OLATHE, KANSAS
Posts: 1,130
|
Douglas:
Welcome from Kansas. This is a good site with lots of active folks with a lot of experience with these trucks. Sounds like you were smart to pass on that one. Keep looking and you will find what you're looking for, especially in your state.
__________________
"It is better to remain silent and be thought a fool, than to open one's mouth and remove all doubt." Ben Franklin __________________ 1970 Chevy shortbed 2002 Harley Custom Chopper (Long sucker) 1998 K2500 5.7L 5-speed Longbed 1st two are My son's toys...they just live in my garage! 1997 GMC K1500 Suburban 1993 S-10 Blazer 4D (youngest son's daily driver) 2000 Dodge Ram 4WD Ext. Cab (5.9L) Wife is a late year 1951 |
|
|
|
|
02-19-2004, 10:43 AM
|
#5 |
|
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Welcome from South Mississippi! Check out the Parts board here, and you will get a better idea of what a $4000 truck should look like.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal.  We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
|
|
|
|
02-19-2004, 11:07 AM
|
#6 |
|
Registered User
Join Date: Aug 2003
Location: Denison, Tx.
Posts: 189
|
Welcome from Denison , I would pass on it thats too much money for it needing all that work. There is a guy on 69 going towards Bell's that had a few truck's setting around for sale . He's across from Mr. Carpet
__________________
2004 Extended cab LS silverado  2001 Buick Lesabre 1968 Chevy Custom 10 LWB Anniversery model 2008 crew cab lt (rolling on dubs) "The nice part about living in a small town is when you don't know what you're doing, someone else always does" |
|
|
|
|
02-19-2004, 12:57 PM
|
#7 |
|
Post Whore
 
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,686
|
Welcome! You will find great info here. I agree with the above, that truck doesn't sound like it is worth anywhere near $4,000.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
|
|
|
|
02-19-2004, 01:24 PM
|
#8 |
|
Senior Member
Join Date: Apr 2003
Location: Howard, Kansas USA
Posts: 1,997
|
Welcome, I also think you're a smart man for passing.
__________________
1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife |
|
|
|
|
02-19-2004, 01:25 PM
|
#9 |
|
Registered User
Join Date: May 2000
Location: Flin Flon, Manitoba, Canada
Posts: 8,853
|
Let me be the first to welcome you from Canada EH!!! Be careful tho, this place is more addictive than CRACK
__________________
My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795 |
|
|
|
|
02-19-2004, 01:37 PM
|
#10 |
|
Thats the Hillbilly way
Join Date: Jul 2001
Location: Torrance,Ca
Posts: 5,979
|
Welcome from SoCal ..
  
__________________
BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen , |
|
|
|
|
02-19-2004, 02:43 PM
|
#11 |
|
Born To Lose Club
Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,307
|
Another Welcome To The Board From The Great White North!
__________________
Brian Smith  - "Born To Lose"1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
|
|
|
|
02-20-2004, 12:46 AM
|
#12 |
|
Registered User
Join Date: Jan 2003
Location: Washington State
Posts: 8,831
|
Welcome from SW Washington State.......
__________________
1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo |
|
|
|
|
02-20-2004, 12:55 AM
|
#13 |
|
Senior Member
 
Join Date: Jun 2002
Location: Cecilia, Louisiana
Posts: 1,638
|
Welcome to the board from south Louisiana !!
Chris Bowtie468
__________________
 Chrisclick here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1969 Camaro X44 LS swap 1968 C10 SWB Fleetside (SOLD) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (SOLD) 194 I6/ PowerGlide |
|
|
|
|
02-20-2004, 01:04 AM
|
#14 |
|
Embrace the Redneck
Join Date: Jan 2004
Location: Cabot, AR
Posts: 1,334
|
welcome from Springfield, MO
Too much bondo, i'd pass, as my dad always said, "Son, Look at a truck's body, if it needs alot of work, pass, you can always get a new motor if you have to but the body needs to last a while."
__________________
'01 Camaro Son, you just can't get there from here... |
|
|
|
|
02-20-2004, 01:11 AM
|
#15 |
|
Registered User
Join Date: Jun 2000
Location: Omaha NE 68122
Posts: 637
|
Welcome form Colorado and like every body said this is the best sit in the world i would pass to i bought my truck for 2500 bucks and not one pice of bondo on it just some thing to think about
i was lucky and welcome one more time
__________________
71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers |
|
|
|
|
02-20-2004, 03:41 AM
|
#16 |
|
Registered User
Join Date: Dec 2003
Location: CA
Posts: 315
|
Remember you get what you pay for, but I am sure that you have heard that before. That is a great price but not for that truck. Welcome to the board from AZ!
__________________
1969 Chevy SB Truck under construction hopefully will be done early next year! Will be posting pics soon. |
|
|
|
|
02-20-2004, 05:59 AM
|
#17 |
|
On the Hillbilly Highway
Join Date: Nov 2002
Location: Edmonton, Alberta
Posts: 90
|
Welcome from Canada Doug, this site is amazing...
__________________
Does anyone else smell smoke? 1967 GMC 910, rolling frame coming soon! |
|
|
|
|
02-20-2004, 01:18 PM
|
#18 |
|
454 club
Join Date: Oct 2002
Location: Oklahoma
Posts: 1,348
|
Welcome from Texas. South of you.
__________________
David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up. |
|
|
|
|
02-20-2004, 01:38 PM
|
#19 |
|
Senior Member
Join Date: Dec 2003
Location: Pampa, Texas
Posts: 1,553
|
I have a '67 short wide for sell.......it needs a new bed floor and a some good tlc on the 283, big back window and bench seat...$1,400 for it..good project truck..you can pm me for more details or contact info if you want to see it. I live in arlington
__________________
https://www.ebay.com/itm/29620574751...mis&media=COPY |
|
|
|
|
02-20-2004, 02:48 PM
|
#20 |
|
Account Suspended
Join Date: Jan 2003
Location: Shadow of Lambeau Field
Posts: 5,597
|
Welcome to the board from Tennessee.
|
|
|
|
|
02-20-2004, 02:58 PM
|
#21 |
|
Inline 69
Join Date: Apr 2003
Location: valleysprings,california
Posts: 1,018
|
welcome from california jeff
|
|
|
|
|
02-20-2004, 09:59 PM
|
#22 |
|
Registered User
Join Date: Sep 2003
Location: Thorntown , Indiana
Posts: 231
|
Welcome from Indiana , you'll find a lot of useful information here , and a lot of nice people
 jyd
__________________
69 Chev C-10 ... painted and ready to reassemble ( for sale ) 82 Custom Deluxe ( have parts to restore ) |
|
|
|
|
02-21-2004, 02:01 AM
|
#23 |
|
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
|
Welcome from
__________________
Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. |
|
|
|
|
02-21-2004, 10:23 AM
|
#24 |
|
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
Welcome from southern oregon..
__________________
GO BIG GREEN GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
02-21-2004, 10:39 AM
|
#25 |
|
Registered User
Join Date: Jan 2000
Location: Orange Beach, Alabama
Posts: 133
|
Welcome from Alabama.
__________________
71 cheyenne 402 th400 swb 71 camper special (PARTS TRUCK) 70 Stepside swb 350 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
