Blazer/Jimmy Jack instructions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71jimmy · 01-13-2005, 01:27 PM

Found this http://cgi.ebay.com/ebaymotors/ws/eB...517878340&rd=1
Wondering if they are the same for Blazer/Jimmy. Anyone still have the stickers to verify?

Thanks

*Gee_Emm* · 01-13-2005, 07:44 PM

Blazers are different

71jimmy · 01-13-2005, 09:17 PM

I figured they would be, just thought I'd check. Thanks Gee Emm.

badpeanut · 01-13-2005, 11:07 PM

While we are on this subject, I think there are at least two different types of jacks. The one pictured on eBay (the full picture below) is like the one in my '72 pickup. The ripped picture below was from a '72 pickup, also. Would these two different styles also apply to Blazers? Did GM just use what they had or is there a reason?

Huck · 01-14-2005, 09:10 AM

These instructions are for pickups. Blazer had different jack storage location. DOES ANYONE HAVE A GOOD SET OF ORIGINAL BLAZER/JIMMY JACK INSTRUCTIONS & ANY OTHER GLUE ON DOCUMENTATION!!! IF WE COULD GET A NICE CLOSE UP PHOTO, WE COULD GET ONE OF OUR GENOUS TECHNO WEENIES TO REPRODUCE, PERHAPS PUT INTO A FILE AND MAKE IT AVAILABLE FOR DOWNLOADING TO THE BOARD MEMBERS. Nothing neater then some nice looking original type documentation/instruction to make our Blazers look original!! HELP---SOMEONE MUST HAVE THIS !!!!!!!!!!!!!!

01-13-2005, 01:27 PM	#1
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	Blazer/Jimmy Jack instructions Found this http://cgi.ebay.com/ebaymotors/ws/eB...517878340&rd=1 Wondering if they are the same for Blazer/Jimmy. Anyone still have the stickers to verify? Thanks __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

01-13-2005, 09:17 PM	#3
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	I figured they would be, just thought I'd check. Thanks Gee Emm. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

01-13-2005, 11:07 PM	#4
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	While we are on this subject, I think there are at least two different types of jacks. The one pictured on eBay (the full picture below) is like the one in my '72 pickup. The ripped picture below was from a '72 pickup, also. Would these two different styles also apply to Blazers? Did GM just use what they had or is there a reason? Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-13-2005, 07:44 PM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Blazers are different

01-14-2005, 09:10 AM	#5
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	These instructions are for pickups. Blazer had different jack storage location. DOES ANYONE HAVE A GOOD SET OF ORIGINAL BLAZER/JIMMY JACK INSTRUCTIONS & ANY OTHER GLUE ON DOCUMENTATION!!! IF WE COULD GET A NICE CLOSE UP PHOTO, WE COULD GET ONE OF OUR GENOUS TECHNO WEENIES TO REPRODUCE, PERHAPS PUT INTO A FILE AND MAKE IT AVAILABLE FOR DOWNLOADING TO THE BOARD MEMBERS. Nothing neater then some nice looking original type documentation/instruction to make our Blazers look original!! HELP---SOMEONE MUST HAVE THIS !!!!!!!!!!!!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.