WTB conversion parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zooza · 01-31-2005, 12:28 AM

My neighbor is converting an early 80's blazer 4x4 from auto to manual trans .
We need the z bar , pedals, and all related rods for this swap. anybody got what we need? Pm with all info , Thanks

**tnblazerk5** · 01-31-2005, 10:14 AM

will 2 wheel drive parts work for that ?????? if so i got all that is needed

zooza · 01-31-2005, 04:34 PM

let me discuss it with him, how much ? ( if we do need it) Thanks Tommy H

Folks1 · 01-31-2005, 05:22 PM

I've done it and found that parts are same on 2wd and 4wd. The frame already had holes for the bolts even.

**tnblazerk5** · 01-31-2005, 06:21 PM

is the z bars the same for v8 and 6 s ? the one i got is 6 ,heres a pic ,i got the whole thing pedels to the clutch

beaterC10 · 01-31-2005, 07:53 PM

The Z bar should be the same since the pivot ball mounts on the bellhousing on 73-84.

zooza · 02-01-2005, 12:32 AM

I called him tonight and he had to work late so it will be a day or two before hes able to see if we need this or if he can rig up what he's got. I say get the parts the price is sooo good! But its his project! and his wallet.

**tnblazerk5** · 02-01-2005, 12:38 AM

ok just let me know in a pm or pm me to tell me to look here lol

01-31-2005, 12:28 AM	#1
zooza Registered User Join Date: Jul 2004 Location: LINDEN, TN. Posts: 260	WTB conversion parts My neighbor is converting an early 80's blazer 4x4 from auto to manual trans . We need the z bar , pedals, and all related rods for this swap. anybody got what we need? Pm with all info , Thanks

01-31-2005, 05:22 PM	#4
Folks1 Registered User Join Date: Jun 2004 Location: Palatka,Florida Posts: 27	2wd - 4wd I've done it and found that parts are same on 2wd and 4wd. The frame already had holes for the bolts even. __________________ '72 K/5 Factory 4Spd '86 K-10 SWB Silverado '88 K-1500 GMC Z-71 Stepside '75 c-60 8yd dump '06 F-350 KingRanch 4X4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-31-2005, 10:14 AM	#2
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	will 2 wheel drive parts work for that ?????? if so i got all that is needed

01-31-2005, 04:34 PM	#3
zooza Registered User Join Date: Jul 2004 Location: LINDEN, TN. Posts: 260	let me discuss it with him, how much ? ( if we do need it) Thanks Tommy H

01-31-2005, 06:21 PM	#5
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	is the z bars the same for v8 and 6 s ? the one i got is 6 ,heres a pic ,i got the whole thing pedels to the clutch

01-31-2005, 07:53 PM	#6
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	The Z bar should be the same since the pivot ball mounts on the bellhousing on 73-84.

02-01-2005, 12:32 AM	#7
zooza Registered User Join Date: Jul 2004 Location: LINDEN, TN. Posts: 260	I called him tonight and he had to work late so it will be a day or two before hes able to see if we need this or if he can rig up what he's got. I say get the parts the price is sooo good! But its his project! and his wallet.

02-01-2005, 12:38 AM	#8
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	ok just let me know in a pm or pm me to tell me to look here lol



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.