Question about Rocker Boxes... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Trifelynn · 02-18-2005, 03:50 PM

Ok, so I need my rocker boxes replaced. My question is this though.

Has anyone powdercoated their rocker boxes? Does it help at all?
Also, I had the ingenious idea to Rhino-line them...is this a good/bad idea?

Anyone done it...or know what would happen, if it would help with the rust problem?

thanks

Lenny

LUV2XCLR8 · 02-18-2005, 04:35 PM

NO IDEA, BUT I HAVE HEARD OF PEOPLE UNDERCOATING THE INSIDE OF THEM

Trifelynn · 02-18-2005, 04:46 PM

I would think that it would be a good idea...but, since I am half Portuguesse
and half Okie...pronounced...Port-a-Oak...we all know that I didn't get the long end of the stick when it came to brains...

haha

Lenny

LUV2XCLR8 · 02-18-2005, 05:02 PM

You Can Remove The End Plates And Coat The Inside Of Them
Pretty Easy, Here Are A Couple Pic's Of Mine (not Coated)

J.Lance · 02-18-2005, 05:24 PM

Quote:

Originally Posted by LUV2XCLR8

You Can Remove The End Plates And Coat The Inside Of Them
Pretty Easy, Here Are A Couple Pic's Of Mine (not Coated)

You must have been dying for an excuse to post those pics! Those look excellent by the way!

LUV2XCLR8 · 02-18-2005, 05:33 PM

Quote:

Originally Posted by J.Lance

You must have been dying for an excuse to post those pics! Those look excellent by the way!

LMAO AND ROTF

NOT REALLY, BUT SINCE YOU INQUIRED, THOSE ARE THE OE ROCKER BOXES

CHEVYE · 02-18-2005, 05:37 PM

yeah LUV, you show off...

..... (you know i`m droolin)

*Gee_Emm* · 02-18-2005, 07:41 PM

I por15ed mine with a couple coat then sprayed on some undercoating just in case.

Trifelynn · 02-18-2005, 08:56 PM

Luv...what is the scoop on those? Seems to be everyone knows about them...but I

fill me in...brothaman

Thanks Gee Emm...

LUV2XCLR8 · 02-18-2005, 10:33 PM

Quote:

Originally Posted by Trifelynn

Luv...what is the scoop on those? Seems to be everyone knows about them...but I

fill me in...brothaman

ERIC (CHEVYE) HAS BEEN HERE AND SEEN THEM IN PERSON (MY HOUSE)

orangeuavol · 02-19-2005, 12:26 AM

I used 3M undecoating on the inside on mine. Its in a spray can and does a great job. I ended up using it for the entire underbody as well.

FRENCHBLUE72 · 02-19-2005, 10:47 AM

I f you have the money get em blasted and coated with rhino or por 15 just make sure you don't get the por on your hands as it dose not come off it wears off..

Trifelynn · 02-19-2005, 01:53 PM

sandblasted I'm guessing?

and then powdercoated and then rhino?

or just rhino?

thanks guys

Trifelynn · 02-20-2005, 03:33 PM

Hey LUV...

are those reproduction rocker boxes?

Or are those yours fixed all purdy and fancy?

I am curious how the reproduction rocker boxes fit...and what-not

thanks

LUV2XCLR8 · 02-20-2005, 03:45 PM

Quote:

Originally Posted by Trifelynn

Hey LUV...

are those reproduction rocker boxes?

Or are those yours fixed all purdy and fancy?

I am curious how the reproduction rocker boxes fit...and what-not

thanks

THOSE ARE CALIFORNIA UNTOUCHED 1972 ORIGINAL EQUIPMENT, PERTY AIN'T THEY

Trifelynn · 02-20-2005, 03:49 PM

your mouth shir is purdy boy!

haha

yeah, they look very good.

I was hoping that they were repro...because if they were, then I would have to say that they are not a waste of money. Looks damn good...maybe I can be so lucky someday

P.S. Would love to come to your spring fling, but my blazer doesn't even have a motor in it..haha, unless you want me to pull it from Maryland

02-18-2005, 03:50 PM	#1
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Question about Rocker Boxes... Ok, so I need my rocker boxes replaced. My question is this though. Has anyone powdercoated their rocker boxes? Does it help at all? Also, I had the ingenious idea to Rhino-line them...is this a good/bad idea? Anyone done it...or know what would happen, if it would help with the rust problem? thanks Lenny __________________ Always looking for a 2wd blazer

02-18-2005, 04:35 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	NO IDEA, BUT I HAVE HEARD OF PEOPLE UNDERCOATING THE INSIDE OF THEM __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-18-2005, 04:46 PM	#3
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	I would think that it would be a good idea...but, since I am half Portuguesse and half Okie...pronounced...Port-a-Oak...we all know that I didn't get the long end of the stick when it came to brains... haha Lenny __________________ Always looking for a 2wd blazer

02-18-2005, 05:02 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	You Can Remove The End Plates And Coat The Inside Of Them Pretty Easy, Here Are A Couple Pic's Of Mine (not Coated) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-18-2005, 05:37 PM	#7
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	yeah LUV, you show off... ..... (you know i`m droolin) __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

02-18-2005, 07:41 PM	#8
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	I por15ed mine with a couple coat then sprayed on some undercoating just in case.

02-18-2005, 08:56 PM	#9
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Luv...what is the scoop on those? Seems to be everyone knows about them...but I fill me in...brothaman Thanks Gee Emm... __________________ Always looking for a 2wd blazer

02-19-2005, 12:26 AM	#11
orangeuavol GO VOLS! Join Date: May 2001 Location: Knoxville, TN Posts: 724	I used 3M undecoating on the inside on mine. Its in a spray can and does a great job. I ended up using it for the entire underbody as well. __________________ http://1972blazer.shutterfly.com/<= blazer build pics It's called golf because all the other four letter words were taken. It's easier to ask for forgiveness than for permission.

02-19-2005, 10:47 AM	#12
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	I f you have the money get em blasted and coated with rhino or por 15 just make sure you don't get the por on your hands as it dose not come off it wears off.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-19-2005, 01:53 PM	#13
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	sandblasted I'm guessing? and then powdercoated and then rhino? or just rhino? thanks guys __________________ Always looking for a 2wd blazer

02-20-2005, 03:33 PM	#14
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Hey LUV... are those reproduction rocker boxes? Or are those yours fixed all purdy and fancy? I am curious how the reproduction rocker boxes fit...and what-not thanks __________________ Always looking for a 2wd blazer

02-20-2005, 03:49 PM	#16
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	your mouth shir is purdy boy! haha yeah, they look very good. I was hoping that they were repro...because if they were, then I would have to say that they are not a waste of money. Looks damn good...maybe I can be so lucky someday P.S. Would love to come to your spring fling, but my blazer doesn't even have a motor in it..haha, unless you want me to pull it from Maryland __________________ Always looking for a 2wd blazer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.