Body Mount Bushings? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 02-23-2005, 03:00 AM

What type should I get and where should I get them? I need the two front clip bushings and the four cab bushings

These are for a daily driven, K25, so I don't need something for high performance handling. Just something that will ride nice, and not have the back of the cab sag down.

Justins76 · 02-23-2005, 05:09 AM

I need them too. I think rubber would be the best for a soft ride. Poly I hear is harsh. So far I've found LMC Trucks to carry them.

Paso76GMCstepper · 02-23-2005, 07:17 PM

i bought thr polyurethane ones from LMC for my GMC 76 K15 4X4.

I love them what a diff from the pieces of tire that was stacked up holding my cab.

it came with the rad support bushings and the cab ones.

They are great truck rides great

DBLSPRT68 · 02-23-2005, 10:07 PM

I bought the rubber cushion kit from LMC. It comes with all bolts and washers. I did this when I swapped cabs on my C20. I had one cab bolt that really was in there! I had to soak it for a while and use a cheeter pipe to get it loose. The ride is good, but it's still a C20. I also put a thin strip of rubber between the bed and frame where the bed bolts mount. I'm hopeing that will kill any squeaks. David

Justins76 · 02-24-2005, 01:39 AM

Quote:

Originally Posted by Russell

Is there any major difference between a 2wd and 4wd's body mounts, or is the difference just between the years? There is a kit on Ebay for a 2wd half ton, but these are for a 3/4 ton 4x4.

Looking at the LMC catalog, they list 3 different kits for 73-80. One for C10/15, one for K10/15 and one for CK20/25. The pictures looks like the rear cab mount is different on 4x4s.

Russell · 02-24-2005, 03:54 AM

Is there any major difference between a 2wd and 4wd's body mounts, or is the difference just between the years? There is a kit on Ebay for a 2wd half ton, but these are for a 3/4 ton 4x4.

loblazer · 02-24-2005, 12:43 PM

Parts Source has them I believe. They are a division of Cdn Tire so should be out your way.

If not Cross Canada parts have them. About $49.00 each if I remember right.
www.crosscanadaparts.com

Doug

Russell · 02-24-2005, 06:42 PM

I thought about cross canada too, but I can hardly justify spending 50 bucks a bushing when I can get an entire kit for 100 bucks US

*1FaastC10* · 02-24-2005, 06:58 PM

buy poly, like 50.00 at summit racing.

Paso76GMCstepper · 02-24-2005, 07:37 PM

54 bucks on sale at Summit. They are Energy Suspension Products. I used the exact same kit I love em. Only I paid 90 bucks to LMC 6 months ago!!!

U wont be sorry!!

Russell · 02-25-2005, 12:04 AM

Alright, the summit option is looking good. I cannot tell, but does the kit include the bushings I need for the rad support?

http://store.summitracing.com/partde...=KeywordSearch

*1FaastC10* · 02-25-2005, 12:10 AM

yes it does.

MylilBowTie · 02-25-2005, 05:48 AM

What all does it really come with? I dont see the top mounts pictured with the bottom mounts.

Paso76GMCstepper · 02-25-2005, 05:57 AM

u will get the rad support spacers, and all the cab mounts The new hardware is for the rear of the cab monts. U will need to cut off the steel spacer that is in the originals and reuse them. The directions will be in there. It is real easy to figure out what is what with the manual. Let me see if I can find the manual online. That would really help to explain

Russell · 02-25-2005, 10:59 AM

Hmm, I guess I am going to have to go garbage picking then, I tossed all the old mounts yesterday :P

02-23-2005, 03:00 AM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Body Mount Bushings? What type should I get and where should I get them? I need the two front clip bushings and the four cab bushings These are for a daily driven, K25, so I don't need something for high performance handling. Just something that will ride nice, and not have the back of the cab sag down. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-23-2005, 05:09 AM	#2
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	I need them too. I think rubber would be the best for a soft ride. Poly I hear is harsh. So far I've found LMC Trucks to carry them. __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!

02-23-2005, 07:17 PM	#3
Paso76GMCstepper Registered User Join Date: Jan 2004 Location: Paso Robles, CA Posts: 347	i bought thr polyurethane ones from LMC for my GMC 76 K15 4X4. I love them what a diff from the pieces of tire that was stacked up holding my cab. it came with the rad support bushings and the cab ones. They are great truck rides great __________________ Tony "Life is a Team Sport" To the memory of the Hendrick Motorsports Plane Crash Victims

02-23-2005, 10:07 PM	#4
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	I bought the rubber cushion kit from LMC. It comes with all bolts and washers. I did this when I swapped cabs on my C20. I had one cab bolt that really was in there! I had to soak it for a while and use a cheeter pipe to get it loose. The ride is good, but it's still a C20. I also put a thin strip of rubber between the bed and frame where the bed bolts mount. I'm hopeing that will kill any squeaks. David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

02-24-2005, 03:54 AM	#6
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Is there any major difference between a 2wd and 4wd's body mounts, or is the difference just between the years? There is a kit on Ebay for a 2wd half ton, but these are for a 3/4 ton 4x4. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-24-2005, 12:43 PM	#7
loblazer Senior Member Join Date: Mar 2004 Location: Fergus, Ontario Posts: 481	Parts Source has them I believe. They are a division of Cdn Tire so should be out your way. If not Cross Canada parts have them. About $49.00 each if I remember right. www.crosscanadaparts.com Doug

02-24-2005, 06:42 PM	#8
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	I thought about cross canada too, but I can hardly justify spending 50 bucks a bushing when I can get an entire kit for 100 bucks US __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-24-2005, 06:58 PM	#9
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	buy poly, like 50.00 at summit racing.

02-24-2005, 07:37 PM	#10
Paso76GMCstepper Registered User Join Date: Jan 2004 Location: Paso Robles, CA Posts: 347	54 bucks on sale at Summit. They are Energy Suspension Products. I used the exact same kit I love em. Only I paid 90 bucks to LMC 6 months ago!!! U wont be sorry!! __________________ Tony "Life is a Team Sport" To the memory of the Hendrick Motorsports Plane Crash Victims

02-25-2005, 12:04 AM	#11
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Alright, the summit option is looking good. I cannot tell, but does the kit include the bushings I need for the rad support? http://store.summitracing.com/partde...=KeywordSearch __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-25-2005, 12:10 AM	#12
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	yes it does.

02-25-2005, 05:48 AM	#13
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	What all does it really come with? I dont see the top mounts pictured with the bottom mounts. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

02-25-2005, 05:57 AM	#14
Paso76GMCstepper Registered User Join Date: Jan 2004 Location: Paso Robles, CA Posts: 347	u will get the rad support spacers, and all the cab mounts The new hardware is for the rear of the cab monts. U will need to cut off the steel spacer that is in the originals and reuse them. The directions will be in there. It is real easy to figure out what is what with the manual. Let me see if I can find the manual online. That would really help to explain __________________ Tony "Life is a Team Sport" To the memory of the Hendrick Motorsports Plane Crash Victims

02-25-2005, 10:59 AM	#15
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Hmm, I guess I am going to have to go garbage picking then, I tossed all the old mounts yesterday :P __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.