1976 rolling chassis sheet metal...200.00 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nancy.R · 03-12-2005, 04:29 PM

Hi, guys ,Iam new here, I have a 1976 3/4 4x4 ton flatbed.
tranny and engine are out. I took the engine and somelse got the tranny. I am in sunland ca . I want 200.00 for it.
body is primered red and the interior is rough. needs tires.
the bed is pretty heavy duty setup.i dont want to part this out must take whole thing it was reg. till jan 2005. so reg is out a couple of months if you wanted to use it for restro.

I want this gone fast so come and get if you want it or its goes to the bone crusher next week. email if you want it.

peace, Nancy

bigbluthng · 03-12-2005, 08:38 PM

welcome from santa clarita. my fiance lives in lakeview terrace. where in sunland are you?

Nancy.R · 03-12-2005, 08:53 PM

foothill and mcvine.
yeah, I have been trying to restore my 80 c10 for a long time , finally have a good 350, its at the machine shop and I just about have the 6 banger /3 speed out. just need the cherry picker to push it out! Ive been collecting parts for a year . only have a few more bed bolts left. then I'll pressure wash and wire brush the frame. Shoot the primer then focus on eng and tranny. then take it over to the spray booth on glenoaks. got the white paint. might put a little blue pearl in the clear , since the interior is going be blue.
looking for turbo 350 for it. I'd trade for a good one.. the truck.
I hate to see it go to the yard.

yeah what you got?

N.

bigbluthng · 03-12-2005, 09:26 PM

the ones that run are my 98 1500 x cab 2wd. it's my daily driver. the camaro is painted prowler orange, need to colorsand and buff. the interior is out so as soon as i am done buffing it goes back in. the ones not running are the blazer, i need to install the rearend, front suspension and the 500ci caddy and trans i just picked up. the 70 swb fleetside is in few pieces and it needs registration. so that one is on the back burner until i have time and money for it.

Nancy.R · 03-12-2005, 09:56 PM

Hey I have a gallon of true finsh that Robert gave, you want to try some?

Nancy.R · 03-14-2005, 12:48 PM

Bump! any offer?

Paso76GMCstepper · 03-14-2005, 07:23 PM

whats the body like is there any way I could get a pic. I need body parts mostly but my father in law may want the running gear and frame.

Pics would be super

Paso76GMCstepper · 03-15-2005, 04:51 AM

ttt

Hello is this thing on

Nancy.R · 03-17-2005, 01:35 PM

sorry , I missed your post, ok I'll take pics. check later?

do you have a way to tow it ?

76HighSierra · 03-17-2005, 10:18 PM

Is it a chevy, or a GMC? If it's a GMC, does it have a grill in very good condition that you would be willing to part with? I would love to have the whole thing, if it was closer.

76HighSierra · 03-17-2005, 10:23 PM

Hey, Paso...find me a '76 GMC grille, will ya?

Nancy.R · 03-19-2005, 12:14 PM

no its a chevy and it has no grill, but good rear end and 4x4 ,,chassis sheet metal cab,. come on guys.. save me from tearing into it.

Paso76GMCstepper · 03-19-2005, 03:30 PM

some pictures will help generate interest

Nancy.R · 03-23-2005, 11:14 AM

[IMG]

[/IMG]

Nancy.R · 03-23-2005, 11:15 AM

http://xs.to/xs.php?h=xs21&d=05123&f=truck-rear.jpg]

[/url]

rich-white · 03-24-2005, 09:02 PM

Wish you were closer... I have a truck that needs ALL that. Running great looks like s**t

03-12-2005, 04:29 PM	#1
Nancy.R Registered User Join Date: Mar 2005 Posts: 21	1976 rolling chassis sheet metal...200.00 Hi, guys ,Iam new here, I have a 1976 3/4 4x4 ton flatbed. tranny and engine are out. I took the engine and somelse got the tranny. I am in sunland ca . I want 200.00 for it. body is primered red and the interior is rough. needs tires. the bed is pretty heavy duty setup.i dont want to part this out must take whole thing it was reg. till jan 2005. so reg is out a couple of months if you wanted to use it for restro. I want this gone fast so come and get if you want it or its goes to the bone crusher next week. email if you want it. peace, Nancy Last edited by Nancy.R; 03-12-2005 at 04:40 PM.

03-12-2005, 08:38 PM	#2
bigbluthng Registered User Join Date: Aug 2003 Location: canyon country, ca, USA Posts: 336	welcome from santa clarita. my fiance lives in lakeview terrace. where in sunland are you? __________________

03-12-2005, 09:26 PM	#4
bigbluthng Registered User Join Date: Aug 2003 Location: canyon country, ca, USA Posts: 336	the ones that run are my 98 1500 x cab 2wd. it's my daily driver. the camaro is painted prowler orange, need to colorsand and buff. the interior is out so as soon as i am done buffing it goes back in. the ones not running are the blazer, i need to install the rearend, front suspension and the 500ci caddy and trans i just picked up. the 70 swb fleetside is in few pieces and it needs registration. so that one is on the back burner until i have time and money for it. __________________

03-14-2005, 07:23 PM	#7
Paso76GMCstepper Registered User Join Date: Jan 2004 Location: Paso Robles, CA Posts: 347	whats the body like is there any way I could get a pic. I need body parts mostly but my father in law may want the running gear and frame. Pics would be super __________________ Tony "Life is a Team Sport" To the memory of the Hendrick Motorsports Plane Crash Victims

03-15-2005, 04:51 AM	#8
Paso76GMCstepper Registered User Join Date: Jan 2004 Location: Paso Robles, CA Posts: 347	ttt Hello is this thing on __________________ Tony "Life is a Team Sport" To the memory of the Hendrick Motorsports Plane Crash Victims

03-12-2005, 08:53 PM	#3
Nancy.R Registered User Join Date: Mar 2005 Posts: 21	foothill and mcvine. yeah, I have been trying to restore my 80 c10 for a long time , finally have a good 350, its at the machine shop and I just about have the 6 banger /3 speed out. just need the cherry picker to push it out! Ive been collecting parts for a year . only have a few more bed bolts left. then I'll pressure wash and wire brush the frame. Shoot the primer then focus on eng and tranny. then take it over to the spray booth on glenoaks. got the white paint. might put a little blue pearl in the clear , since the interior is going be blue. looking for turbo 350 for it. I'd trade for a good one.. the truck. I hate to see it go to the yard. yeah what you got? N.

03-12-2005, 09:56 PM	#5
Nancy.R Registered User Join Date: Mar 2005 Posts: 21	Hey I have a gallon of true finsh that Robert gave, you want to try some?

03-14-2005, 12:48 PM	#6
Nancy.R Registered User Join Date: Mar 2005 Posts: 21	Bump! any offer?

03-17-2005, 01:35 PM	#9
Nancy.R Registered User Join Date: Mar 2005 Posts: 21	sorry , I missed your post, ok I'll take pics. check later? do you have a way to tow it ?

03-17-2005, 10:18 PM	#10
76HighSierra DAMN, I love Big Blocks! Join Date: Aug 2003 Location: New Mexico, USA Posts: 619	Is it a chevy, or a GMC? If it's a GMC, does it have a grill in very good condition that you would be willing to part with? I would love to have the whole thing, if it was closer. __________________ Marc Bona Hobbs, New Mexico 1976 1/2 ton GMC High Sierra. 454 c.i.d./ TH400. *Soon to get a mild warming over.* 3.40 rear.

03-17-2005, 10:23 PM	#11
76HighSierra DAMN, I love Big Blocks! Join Date: Aug 2003 Location: New Mexico, USA Posts: 619	Hey, Paso...find me a '76 GMC grille, will ya? __________________ Marc Bona Hobbs, New Mexico 1976 1/2 ton GMC High Sierra. 454 c.i.d./ TH400. *Soon to get a mild warming over.* 3.40 rear.

03-19-2005, 12:14 PM	#12
Nancy.R Registered User Join Date: Mar 2005 Posts: 21	no its a chevy and it has no grill, but good rear end and 4x4 ,,chassis sheet metal cab,. come on guys.. save me from tearing into it.

03-19-2005, 03:30 PM	#13
Paso76GMCstepper Registered User Join Date: Jan 2004 Location: Paso Robles, CA Posts: 347	some pictures will help generate interest __________________ Tony "Life is a Team Sport" To the memory of the Hendrick Motorsports Plane Crash Victims

03-23-2005, 11:14 AM	#14
Nancy.R Registered User Join Date: Mar 2005 Posts: 21	[IMG][/IMG]

03-23-2005, 11:15 AM	#15
Nancy.R Registered User Join Date: Mar 2005 Posts: 21	http://xs.to/xs.php?h=xs21&d=05123&f=truck-rear.jpg][/url]



Register or Log In To remove these advertisements.

03-24-2005, 09:02 PM	#16
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Wish you were closer... I have a truck that needs ALL that. Running great looks like s**t

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.