What are you doing over your weekend?? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 03-13-2005, 11:40 AM

I worked saturday and today I have to clean the hell outta the house cause it's getting appraised.. Or I may start on putting the sheetmetal in.. Got the sheet metal from classic heartbeat and the stud gun from harbor freight with lifetime warranty..

chevyboy55 · 03-13-2005, 12:59 PM

Gonna finish the mud work from boxing in the blazer tank fill neck.

70short · 03-13-2005, 02:25 PM

bagged91 · 03-13-2005, 07:06 PM

I ended up having a decent day at the swap meet. Met boardmember "Smokekiki", sold tons of $tuff, and froze my nardz off... I'm beat, I will unload the burb tommorrow...

deth_1970 · 03-13-2005, 07:18 PM

my weekend, was spent going over financials, so I can go see about getting financed for a house, with a 2 car garage, so I can work on my truck, lol its been awhile since I have been on here, but always thinking about my turck

weasel29gm · 03-13-2005, 10:44 PM

Got cab bushings in and rolled the motor with starter for the first time.

orangeuavol · 03-13-2005, 10:57 PM

finish my blazer......................................................same as every weekend, but hasn't happened yet

**JIMs70GMC** · 03-14-2005, 07:05 AM

Bought some bolts and bushings to replace the rear spring bushings in both trucks. Dressed out the wood for my long step. Some how ended up going to work for 17 hours. Was the tooth fairy this morning. Now I'm back at work!

Hotrod70C10 · 03-14-2005, 08:01 AM

I spent Sunday pulling the topend and cam out of my motor. My truck is sitting in my buddy's drive today, I should be bolting my new heads and putting the new cam in today after work.

BigDave · 03-14-2005, 09:23 AM

The wife and kids left Saturday morning on spring break for Grandma's house. I then proceeded to the liquor store, the cigar store, and the grocery store.

Earlier in the week I received a nice chrome rear dress bumper from Early Classic Enterpises. It's to replace the old, white, pitted, faded tounge styler bumper. I then removed the frame attached receiver style hitch from the Blazer and installed both the hitch and the new bumper on the Cheyenne. It looks much better now.

Sunday was spent piloting the steady stead that is the John Deere SST 16.

Later I smoked stogies on the front porch and admired my manly work while getting slightly toasted.

I'm not ashamed to admit that I miss my wife and kids.

03-13-2005, 11:40 AM	#26
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	I worked saturday and today I have to clean the hell outta the house cause it's getting appraised.. Or I may start on putting the sheetmetal in.. Got the sheet metal from classic heartbeat and the stud gun from harbor freight with lifetime warranty.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-13-2005, 02:25 PM	#28
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	__________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"

03-13-2005, 07:06 PM	#29
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	I ended up having a decent day at the swap meet. Met boardmember "Smokekiki", sold tons of $tuff, and froze my nardz off... I'm beat, I will unload the burb tommorrow... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

03-13-2005, 07:18 PM	#30
deth_1970 Registered User Join Date: Jul 2004 Location: Braggs, okla Posts: 161	my weekend, was spent going over financials, so I can go see about getting financed for a house, with a 2 car garage, so I can work on my truck, lol its been awhile since I have been on here, but always thinking about my turck __________________ 78 dualy crew cab wife calls "the beast" 79 silverado "yeller" 99 tahoe 02 Gmc sierra

03-13-2005, 10:44 PM	#31
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,101	Got cab bushings in and rolled the motor with starter for the first time. __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

03-13-2005, 12:59 PM	#27
chevyboy55 Senior Member Join Date: Aug 2004 Location: Kelso,Wa Posts: 3,637	Gonna finish the mud work from boxing in the blazer tank fill neck.

03-13-2005, 10:57 PM	#32
orangeuavol GO VOLS! Join Date: May 2001 Location: Knoxville, TN Posts: 724	finish my blazer......................................................same as every weekend, but hasn't happened yet __________________ http://1972blazer.shutterfly.com/<= blazer build pics It's called golf because all the other four letter words were taken. It's easier to ask for forgiveness than for permission.

03-14-2005, 07:05 AM	#33
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Bought some bolts and bushings to replace the rear spring bushings in both trucks. Dressed out the wood for my long step. Some how ended up going to work for 17 hours. Was the tooth fairy this morning. Now I'm back at work! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

03-14-2005, 08:01 AM	#34
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	I spent Sunday pulling the topend and cam out of my motor. My truck is sitting in my buddy's drive today, I should be bolting my new heads and putting the new cam in today after work. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

03-14-2005, 09:23 AM	#35
BigDave I poop on Ford! Join Date: Apr 2002 Location: Houston Area Posts: 295	The wife and kids left Saturday morning on spring break for Grandma's house. I then proceeded to the liquor store, the cigar store, and the grocery store. Earlier in the week I received a nice chrome rear dress bumper from Early Classic Enterpises. It's to replace the old, white, pitted, faded tounge styler bumper. I then removed the frame attached receiver style hitch from the Blazer and installed both the hitch and the new bumper on the Cheyenne. It looks much better now. Sunday was spent piloting the steady stead that is the John Deere SST 16. Later I smoked stogies on the front porch and admired my manly work while getting slightly toasted. I'm not ashamed to admit that I miss my wife and kids. __________________ 1972 Chevy Cheyenne - LWB, factory 402BB 2005 Chevy Suburban LT 2006 Chrysler 300C - SRT8

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.