Parting: 71 burb - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 05-14-2005, 07:08 PM

A few more pics...

bagged91 · 05-15-2005, 08:56 AM

Shipping to NJ 08071 on the front interior holddown & the 3rd door sill plate... Also, how is the "ring" that goes around the pushbutton on the tailgate? Is it pitted?

Thanks again!
Joe

**too much stuff** · 05-15-2005, 11:02 AM

bagged91, i will try to find a sturdy tube or something to ship parts and will get you a total then. I will pull the strip today and look it over good for ya. Will let you know if i find anything wrong with it. The rear hatch and gate i am going to leave complete for a bit yet...

BertMac · 05-15-2005, 12:49 PM

interested in the clutch/brake pedals and linkage.(rods, z-bar) as long as it is the same as a 70 C-10.
How about the dash pad too?

Bert

MARIOS68PANEL · 05-15-2005, 02:05 PM

Is the wiring all intact , not cut up. I wouldnt mind the wiring from under dash and from dash to tail lights. Also the tail lights Houses . To 95695zip
Thanks

**too much stuff** · 05-15-2005, 10:43 PM

I think all the clutch and related parts would be the same as a pickup. I think the dash pad was cracked.
I will check stuff over tomorrow, including the wiring and housings. Eric

rodstored-72 · 05-16-2005, 10:43 AM

by chance do the inner fenders not have any rust or dents in them??? if they are in good shape i will talk to you about them!!!

thanks!!
rodstored-72

**too much stuff** · 05-16-2005, 11:14 PM

rodstored, Not much for any good sheetmetal on this one. Eric

bagged91 · 05-17-2005, 10:05 PM

Got your PM & sent one back atcha!

mrein3 · 05-18-2005, 07:53 AM

How tweaked is the rear bumper? It looks a little bent in the photos.

I want to change my kluged rear bumper for a painted sport bumper. Is that painted rear sport bumper the same as one for a pickup? How about the mounts that hold it on the frame?
I guess I'm interested if it all works on a pickup and isn't bent up too bad.

**too much stuff** · 05-18-2005, 11:32 PM

mrein, I think the bumper was decent, but will check tomorrow for sure for ya. I have no idea if it is the same as a pickup. I would guess it is, but don't know for sure. I have another one on a parts truck also that is daily driver condition. C'mon up and buy some parts. Any interest in a 307 engine? Eric

ricecop425 · 05-19-2005, 02:29 AM

how much would you want for the front disk brakes and spindles or are those for sale, and shipping to 98034?

mrein3 · 05-19-2005, 08:42 AM

Quote:

Originally Posted by too much stuff

mrein, I think the bumper was decent, but will check tomorrow for sure for ya. I have no idea if it is the same as a pickup. I would guess it is, but don't know for sure. I have another one on a parts truck also that is daily driver condition. C'mon up and buy some parts. Any interest in a 307 engine? Eric

Eric,
Actually I was thinking road trip. A friend has a lake place up by Marcell. Yesterday I proposed a road trip in case he needed to do anything up there.

What I would like is a paintable rear bumper.

What I need are two 6-lug factory rims that will fit over disc brakes. I blew out a tire recently and was reminded that of the 6 rims I own only 3 of them fit over the front discs on my truck. I'd like to get two more for a total of 5 so I could rotate tires AND have a spare that fit the front.

I checked a supplier's site and they sell the same rear sport bumper for truck, blazer, and sub. The only question then is the rear brackets.

Please let me know if you can help.
Matt

**too much stuff** · 05-20-2005, 12:04 AM

Ricecop, i will do some checking on shipping in the next day or 2.
Matt, the rear bumper looks pretty straight. Being a burb, it does not have gravel sheilds on them. I have some stock wheels, but not sure if they will fit your app. Hope this helps, Eric

**too much stuff** · 05-23-2005, 08:57 PM

Almost complete yet. Still have all 3 seats with belts. $400 and upper and lower hatch for $65 each. I do not want to ship the big stuff unless you can arrange it. Only pieces sold are interior mat holddown and third door sill, and rear bumper pending.
Still have door panels, visors, arm rests, rear door window lifts etc. Will be off to soup can heaven soon. Eric

**too much stuff** · 05-25-2005, 10:34 PM

Last ttt... Leaving my yard this weekend.

**too much stuff** · 05-25-2005, 11:00 PM

Just found out i can get some of the bigger parts to mankato MN in a few weeks if that helps anyone. Eric

bagged91 · 05-26-2005, 10:13 PM

If you decide to scrap, I could still use the chrome off of the tailgate/liftgate if it isn't pitted too badly.

**too much stuff** · 05-26-2005, 10:35 PM

bagged 91, I am going to pull the hatch and gate before it goes. Gonna try to sell complete on those. If i get tired off tripping on them, you can have dibs on the hardware, Eric

bagged91 · 05-26-2005, 10:42 PM

Cool.

05-14-2005, 07:08 PM	#26
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	A few more pics... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-15-2005, 08:56 AM	#27
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Shipping to NJ 08071 on the front interior holddown & the 3rd door sill plate... Also, how is the "ring" that goes around the pushbutton on the tailgate? Is it pitted? Thanks again! Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

05-15-2005, 11:02 AM	#28
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	bagged91, i will try to find a sturdy tube or something to ship parts and will get you a total then. I will pull the strip today and look it over good for ya. Will let you know if i find anything wrong with it. The rear hatch and gate i am going to leave complete for a bit yet... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-15-2005, 12:49 PM	#29
BertMac Registered User Join Date: Jul 2003 Location: texas Posts: 9	interested in the clutch/brake pedals and linkage.(rods, z-bar) as long as it is the same as a 70 C-10. How about the dash pad too? Bert Last edited by BertMac; 05-15-2005 at 01:10 PM.

05-15-2005, 02:05 PM	#30
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Is the wiring all intact , not cut up. I wouldnt mind the wiring from under dash and from dash to tail lights. Also the tail lights Houses . To 95695zip Thanks __________________ 67 short step 71 Custom

05-15-2005, 10:43 PM	#31
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	I think all the clutch and related parts would be the same as a pickup. I think the dash pad was cracked. I will check stuff over tomorrow, including the wiring and housings. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-16-2005, 10:43 AM	#32
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,041	by chance do the inner fenders not have any rust or dents in them??? if they are in good shape i will talk to you about them!!! thanks!! rodstored-72

05-16-2005, 11:14 PM	#33
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	rodstored, Not much for any good sheetmetal on this one. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-17-2005, 10:05 PM	#34
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Got your PM & sent one back atcha! __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

05-18-2005, 07:53 AM	#35
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,254	How tweaked is the rear bumper? It looks a little bent in the photos. I want to change my kluged rear bumper for a painted sport bumper. Is that painted rear sport bumper the same as one for a pickup? How about the mounts that hold it on the frame? I guess I'm interested if it all works on a pickup and isn't bent up too bad. __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

05-18-2005, 11:32 PM	#36
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	mrein, I think the bumper was decent, but will check tomorrow for sure for ya. I have no idea if it is the same as a pickup. I would guess it is, but don't know for sure. I have another one on a parts truck also that is daily driver condition. C'mon up and buy some parts. Any interest in a 307 engine? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-19-2005, 02:29 AM	#37
ricecop425 carl Join Date: Nov 2004 Location: seattle Posts: 190	how much would you want for the front disk brakes and spindles or are those for sale, and shipping to 98034? __________________ a man and his truck, such a beautiful thing

05-20-2005, 12:04 AM	#39
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Ricecop, i will do some checking on shipping in the next day or 2. Matt, the rear bumper looks pretty straight. Being a burb, it does not have gravel sheilds on them. I have some stock wheels, but not sure if they will fit your app. Hope this helps, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-23-2005, 08:57 PM	#40
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Almost complete yet. Still have all 3 seats with belts. $400 and upper and lower hatch for $65 each. I do not want to ship the big stuff unless you can arrange it. Only pieces sold are interior mat holddown and third door sill, and rear bumper pending. Still have door panels, visors, arm rests, rear door window lifts etc. Will be off to soup can heaven soon. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-25-2005, 10:34 PM	#41
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Last ttt... Leaving my yard this weekend. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

05-25-2005, 11:00 PM	#42
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Just found out i can get some of the bigger parts to mankato MN in a few weeks if that helps anyone. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-26-2005, 10:13 PM	#43
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	If you decide to scrap, I could still use the chrome off of the tailgate/liftgate if it isn't pitted too badly. __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

05-26-2005, 10:35 PM	#44
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	bagged 91, I am going to pull the hatch and gate before it goes. Gonna try to sell complete on those. If i get tired off tripping on them, you can have dibs on the hardware, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-26-2005, 10:42 PM	#45
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Cool. __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.