i may have a nice 68 non a/c cab f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 06-09-2005, 08:23 PM

if i don't sale this truck as a hole for $1800.00 soon i will take $800.00 for cab and doors . its very soild i replaced the rockers . cab corners were fine has small rust in kick panel area and small rust in floor suports not bad at all . good around windshield inner and outer good on firewall area .

billsbowtie · 06-09-2005, 08:24 PM

billsbowtie · 06-09-2005, 08:24 PM

billsbowtie · 06-09-2005, 08:25 PM

billsbowtie · 06-09-2005, 08:27 PM

billsbowtie · 06-09-2005, 08:28 PM

inner rockers and cab corners are org. and in good shape . it has a new windshield .

67327NoS · 06-09-2005, 10:39 PM

Wow that is a pretty nice truck for 1800!
Wished i lived in the states or could get into the states cause i would surely buy the truck form you?Looks like a real good start for 1800$ wow
I would almost have to hate to say it but i wish i was a American

**CUSTOM/10** · 06-10-2005, 09:19 AM

If $800 includes delivery to NH I'll take it !!!!

Gary

68haywagon · 06-10-2005, 11:15 AM

I wish I had a way to get it up to me. You won't be going to Carlisle in Aug will you

?

Is it in good running condition to drive some distance? What dos it need to be ready to go if the answer above is no?

Mike

billsbowtie · 06-10-2005, 11:39 AM

68 haywagon its been dependable around here . it has not used any oil or trans. fluid but its 639 miles from me to you . and the truck is 37 years old . i will not be at that show you where talking about . i going to try to make supper chevy at bristol tn. june 24/25/26 and the show in maggie valley nc. july 1/2/3

billsbowtie · 06-10-2005, 11:41 AM

custom/10 it would take almost $800.00 for gas

**CUSTOM/10** · 06-10-2005, 02:45 PM

1880 mi @ 12mpg x 2.10/gal = $329.00

I'll meet you 1/2 way

qksilver · 06-11-2005, 12:12 AM

How complete would the cab be, besides the doors?

billsbowtie · 06-11-2005, 02:25 PM

i have a couple guys looking at it as a hole truck. but the cab would be complete with doors, all glass . bed would be sold by its self drifferent from cab . thanks bill

06-09-2005, 08:23 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i may have a nice 68 non a/c cab f/s if i don't sale this truck as a hole for $1800.00 soon i will take $800.00 for cab and doors . its very soild i replaced the rockers . cab corners were fine has small rust in kick panel area and small rust in floor suports not bad at all . good around windshield inner and outer good on firewall area .

06-09-2005, 08:28 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	inner rockers and cab corners are org. and in good shape . it has a new windshield . Last edited by billsbowtie; 06-09-2005 at 08:30 PM.

06-09-2005, 10:39 PM	#7
67327NoS Registered User Join Date: Mar 2005 Location: Estevan Sask. Posts: 12	Wow that is a pretty nice truck for 1800! Wished i lived in the states or could get into the states cause i would surely buy the truck form you?Looks like a real good start for 1800$ wow I would almost have to hate to say it but i wish i was a American __________________ 67 C10 lwb 69 327 700r4 3.73 gears edelbrock 1405 carb comp cams xe268h cam performer intake Last edited by 67327NoS; 06-09-2005 at 10:40 PM.

06-10-2005, 09:19 AM	#8
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,866	Cab If $800 includes delivery to NH I'll take it !!!! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

06-10-2005, 11:15 AM	#9
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	I wish I had a way to get it up to me. You won't be going to Carlisle in Aug will you ? Is it in good running condition to drive some distance? What dos it need to be ready to go if the answer above is no? Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

06-09-2005, 08:24 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997

06-09-2005, 08:25 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997

06-09-2005, 08:27 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997

06-10-2005, 11:39 AM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	68 haywagon its been dependable around here . it has not used any oil or trans. fluid but its 639 miles from me to you . and the truck is 37 years old . i will not be at that show you where talking about . i going to try to make supper chevy at bristol tn. june 24/25/26 and the show in maggie valley nc. july 1/2/3

06-10-2005, 11:41 AM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	custom/10 it would take almost $800.00 for gas

06-10-2005, 02:45 PM	#12
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,866	You must be getting 3 mpg 1880 mi @ 12mpg x 2.10/gal = $329.00 I'll meet you 1/2 way __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

06-11-2005, 12:12 AM	#13
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	How complete would the cab be, besides the doors?

06-11-2005, 02:25 PM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i have a couple guys looking at it as a hole truck. but the cab would be complete with doors, all glass . bed would be sold by its self drifferent from cab . thanks bill

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.