1977 chevy scottsdale C10 parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

full foot notch · 06-29-2005, 07:46 PM

well, since yall know i had all that trouble with finishing my truck, im parting it out so that i can fund my v8 s10 project

so i have a complete 1977 chevy scottsdale c10 with a 1986 fleetside bed, minus the motor and tranny, but if ya need parts leeme know and make an offer

-the price for the factory bucket seats, console and brackets, which i would like 400 plus shipping

-have the factory tilt column with original keys, but cheap APC wheel on it for moving around the truck, would like 75 obo, still in the truck so its a uncut harness

-a 1986 GMC SWB fleetside bed, blue in color, has some holes on rails from currently attached siderails, only rust is minor surface rust that is covered over with tape so that it is not open to the air, can be sanded off type surface rust

-uninstalled cab and core support bushing kit from chevyduty
-uninstalled bed bolt kit from chevy duty, either zinc or stainless, will have to look

-unbent original 1977 hood, would say 97% rust free, make offer

-seatbelts, dashpad,door panels and carpet are the med blue color

have a square tube aftermarket grill for the front, make offer

new sheetmetal that i have is a brand new core support,full cab corner patch panels, full rocker replacement panels, new battery tray and tray support for passenger side

other than that, pretty much have a complete original 1977 chevy c10 to get parts from

will take a few pictures but can also take pictures upon request

full foot notch · 06-29-2005, 08:21 PM

here are some pics, sorry for the quality

eagle23 · 06-29-2005, 09:41 PM

How much do you want for the cab mount kit?

Do you have a pair of doors in good shape?

Thx.

Brian

full foot notch · 06-29-2005, 10:25 PM

eagle23 ,since they are brand new in the box, chevy duty has them listed at 59.95, but i will sell for $40, so $40 is the price plus ship, which should be around $5

the doors, yes they are in good shape, the outsides are in good shape, the insides have a cutout on each door for a 6x9 that is already mounted in there, Private Message me an offer on the doors , you would have to pick up most likely to save on shipping(since your in ATL it would be a half a daytrip), but the doors would be full doors minus inside door color panels, but that is the door, lock, main glass, vent window, and can include the mirrors if needbe, but like i said PM me a reasonable offer on the pair of doors

eagle23 · 06-30-2005, 11:21 AM

I'm going to pass on the cab bushings. Didn't realize they were poly until I double checked in the chevyduty cat. I prefer the softness of the rubber ones.

*79 silverado* · 06-30-2005, 08:05 PM

if you get some good pics of the seats and console send me an email....

slingin mud · 06-30-2005, 10:01 PM

Is there an ac unit and how much

bluex · 07-01-2005, 07:52 AM

How much for the bed??

full foot notch · 07-01-2005, 10:08 AM

79 silverado- ill take some pics for you and email em when i get home from work

Slingin Mud- there is an A/C unit on the cab and the controls in the cab, but no lines or compressor since i had originally tossed them to make this a lightened race truck , but if still interested, PM me an offer for the stuff

Blue X- PM me an offer on the bed, but remember you would have to come pick up the bed, its unbolted right now, but its in good condition in reguards to overall condition and dents(which there is no dents), but like i said, PM me a reasonable offer, and for travel, from where i live orlando/altamonte springs, i could get to a hunting camp in estil, SC in about 4.5 hours goin down 95

**76sierraclassic** · 07-01-2005, 02:21 PM

I'd like to see a better picture of the seats and console. I've got a 76 with the medium blue interior that I'd like to put buckets in. What kind of shape are they in - would they need to be recovered, etc.....

Thanks,
Mike

corn · 07-01-2005, 04:24 PM

Im in need of a 2wd shortbed driveshaft for my 84...corn

full foot notch · 07-01-2005, 11:46 PM

cornfed, is it a th350 or th400, i think i have the th350 driveshaft

full foot notch · 07-01-2005, 11:47 PM

for all those interested, i will try to take better pics of the interior tomorrow

thanks

victoryauto · 07-07-2005, 04:28 AM

Pm sent on bushings and other items.

victoryauto · 07-07-2005, 06:57 PM

Passed on the bushings decided to go with a complete kit from Year One, thanks anyway.

full foot notch · 07-10-2005, 04:28 PM

bump here are some pics of the console, and then the pictures of one of the seats, the brackets and the underside of it

rchdrm · 07-11-2005, 09:41 PM

Do you have the entire power steering setup along with the tilt wheel?

corn · 07-12-2005, 12:32 AM

Sorry it took so long to reply, Ive been on vacation. I have a shortbox with a 350 turbo. Let me know. Thanks...corn

full foot notch · 07-12-2005, 07:52 PM

RCHDRM, yes i do have the whole steering setup, from the tilt column, the steering shaft, the steering box with the hydroboost pump and reservoir on it, PM me an offer for the whole setup

CORNFED63, thats the exact driveshaft that i have in the pickup bed, PM me an offer on it

full foot notch · 07-13-2005, 06:16 PM

CAB BUSHING SET-SOLD
PICKUP BED AND TAILGATE-SOLD PENDING $$

seats, console,column, door panels, and everything else still for sale

*79 silverado* · 07-14-2005, 01:13 PM

I'll have to pass on the seats to whoever is further down the line, a little too worn for the price & shipping costs to move em for me

bigarmzz · 07-14-2005, 01:16 PM

this truck a 2wd?....

would ya be willing to sell those bucket seat brackets by themselves?

full foot notch · 07-14-2005, 04:09 PM

bigarmzz, PM me an offer and i might consider, but as of right now, i want to keep it all together, but like i said $$ talks

full foot notch · 07-17-2005, 11:03 PM

bump, stuff still for sale, i know yall people need parts

GARMCo · 08-16-2005, 01:59 PM

Hi--I need the air cond./heater blower motor fan wheel -- this is the "hamster wheel" style circular fan wheel that attaches to the blower motor and moves the air through the heater and air conditioning ducts. I think any 73-78 Chevy truck will interchange. Thanks-- Tommy

06-29-2005, 07:46 PM	#1
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	1977 chevy scottsdale C10 parting out well, since yall know i had all that trouble with finishing my truck, im parting it out so that i can fund my v8 s10 project so i have a complete 1977 chevy scottsdale c10 with a 1986 fleetside bed, minus the motor and tranny, but if ya need parts leeme know and make an offer -the price for the factory bucket seats, console and brackets, which i would like 400 plus shipping -have the factory tilt column with original keys, but cheap APC wheel on it for moving around the truck, would like 75 obo, still in the truck so its a uncut harness -a 1986 GMC SWB fleetside bed, blue in color, has some holes on rails from currently attached siderails, only rust is minor surface rust that is covered over with tape so that it is not open to the air, can be sanded off type surface rust -uninstalled cab and core support bushing kit from chevyduty -uninstalled bed bolt kit from chevy duty, either zinc or stainless, will have to look -unbent original 1977 hood, would say 97% rust free, make offer -seatbelts, dashpad,door panels and carpet are the med blue color have a square tube aftermarket grill for the front, make offer new sheetmetal that i have is a brand new core support,full cab corner patch panels, full rocker replacement panels, new battery tray and tray support for passenger side other than that, pretty much have a complete original 1977 chevy c10 to get parts from will take a few pictures but can also take pictures upon request Last edited by full foot notch; 06-29-2005 at 08:04 PM.

06-29-2005, 08:21 PM	#2
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	here are some pics, sorry for the quality Attached Images

06-29-2005, 10:25 PM	#4
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	eagle23 ,since they are brand new in the box, chevy duty has them listed at 59.95, but i will sell for $40, so $40 is the price plus ship, which should be around $5 the doors, yes they are in good shape, the outsides are in good shape, the insides have a cutout on each door for a 6x9 that is already mounted in there, Private Message me an offer on the doors , you would have to pick up most likely to save on shipping(since your in ATL it would be a half a daytrip), but the doors would be full doors minus inside door color panels, but that is the door, lock, main glass, vent window, and can include the mirrors if needbe, but like i said PM me a reasonable offer on the pair of doors Last edited by full foot notch; 06-29-2005 at 10:26 PM.

06-30-2005, 10:01 PM	#7
slingin mud Mark Join Date: May 2005 Location: columbus ohio Posts: 102	ac Is there an ac unit and how much __________________ Look at every day as a holiday, some just better than others.Build what you got be happy with what you have This truck is for sale

07-01-2005, 07:52 AM	#8
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	How much for the bed?? __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

06-29-2005, 09:41 PM	#3
eagle23 Active Member Join Date: Feb 2004 Location: Atlanta GA Posts: 174	How much do you want for the cab mount kit? Do you have a pair of doors in good shape? Thx. Brian

06-30-2005, 11:21 AM	#5
eagle23 Active Member Join Date: Feb 2004 Location: Atlanta GA Posts: 174	I'm going to pass on the cab bushings. Didn't realize they were poly until I double checked in the chevyduty cat. I prefer the softness of the rubber ones.

06-30-2005, 08:05 PM	#6
79 silverado Account Suspended Join Date: Nov 2004 Location: Rhode Island/Vermont Posts: 583	if you get some good pics of the seats and console send me an email....

07-01-2005, 10:08 AM	#9
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	79 silverado- ill take some pics for you and email em when i get home from work Slingin Mud- there is an A/C unit on the cab and the controls in the cab, but no lines or compressor since i had originally tossed them to make this a lightened race truck , but if still interested, PM me an offer for the stuff Blue X- PM me an offer on the bed, but remember you would have to come pick up the bed, its unbolted right now, but its in good condition in reguards to overall condition and dents(which there is no dents), but like i said, PM me a reasonable offer, and for travel, from where i live orlando/altamonte springs, i could get to a hunting camp in estil, SC in about 4.5 hours goin down 95

07-01-2005, 02:21 PM	#10
76sierraclassic Senior Member Join Date: Feb 2004 Location: White Hall, AR Posts: 316	I'd like to see a better picture of the seats and console. I've got a 76 with the medium blue interior that I'd like to put buckets in. What kind of shape are they in - would they need to be recovered, etc..... Thanks, Mike

07-01-2005, 04:24 PM	#11
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Im in need of a 2wd shortbed driveshaft for my 84...corn

07-01-2005, 11:46 PM	#12
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	cornfed, is it a th350 or th400, i think i have the th350 driveshaft

07-01-2005, 11:47 PM	#13
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	for all those interested, i will try to take better pics of the interior tomorrow thanks Last edited by full foot notch; 07-01-2005 at 11:49 PM.

07-07-2005, 04:28 AM	#14
victoryauto Registered User Join Date: Sep 2004 Location: natchitoches, louisiana Posts: 112	Pm sent on bushings and other items. Last edited by victoryauto; 07-07-2005 at 04:31 AM.

07-07-2005, 06:57 PM	#15
victoryauto Registered User Join Date: Sep 2004 Location: natchitoches, louisiana Posts: 112	Passed on the bushings decided to go with a complete kit from Year One, thanks anyway.



Register or Log In To remove these advertisements.

07-10-2005, 04:28 PM	#16
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	bump here are some pics of the console, and then the pictures of one of the seats, the brackets and the underside of it

07-11-2005, 09:41 PM	#17
rchdrm The start of the $ pit! Join Date: Jul 2005 Location: garland, Tx Posts: 153	Do you have the entire power steering setup along with the tilt wheel?

07-12-2005, 12:32 AM	#18
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Sorry it took so long to reply, Ive been on vacation. I have a shortbox with a 350 turbo. Let me know. Thanks...corn

07-12-2005, 07:52 PM	#19
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	RCHDRM, yes i do have the whole steering setup, from the tilt column, the steering shaft, the steering box with the hydroboost pump and reservoir on it, PM me an offer for the whole setup CORNFED63, thats the exact driveshaft that i have in the pickup bed, PM me an offer on it

07-13-2005, 06:16 PM	#20
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	CAB BUSHING SET-SOLD PICKUP BED AND TAILGATE-SOLD PENDING $$ seats, console,column, door panels, and everything else still for sale

07-14-2005, 01:13 PM	#21
79 silverado Account Suspended Join Date: Nov 2004 Location: Rhode Island/Vermont Posts: 583	I'll have to pass on the seats to whoever is further down the line, a little too worn for the price & shipping costs to move em for me

07-14-2005, 01:16 PM	#22
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	this truck a 2wd?.... would ya be willing to sell those bucket seat brackets by themselves? __________________ 1987 350 TBI lowered 5/7 Last edited by bigarmzz; 07-14-2005 at 01:17 PM.

07-14-2005, 04:09 PM	#23
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	bigarmzz, PM me an offer and i might consider, but as of right now, i want to keep it all together, but like i said $$ talks

07-17-2005, 11:03 PM	#24
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	bump, stuff still for sale, i know yall people need parts

08-16-2005, 01:59 PM	#25
GARMCo Registered User Join Date: May 2004 Location: Georgia Posts: 43	Air COnd. part Hi--I need the air cond./heater blower motor fan wheel -- this is the "hamster wheel" style circular fan wheel that attaches to the blower motor and moves the air through the heater and air conditioning ducts. I think any 73-78 Chevy truck will interchange. Thanks-- Tommy __________________ 1973 K5

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode