|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-10-2005, 11:44 PM
|
#1 |
|
Bucket of Bolts
Join Date: Dec 2003
Location: Anderson, Indiana
Posts: 455
|
Scrap sale, lots of C/K parts for cheap
I've started taking my '82 K20 apart to junk it and am saving all useable parts off it. Here is a brief list of some of the things up for grabs (there are many more parts than this): Everything is OBO, I'm just pulling this stuff to help some people out if they need cheap parts as I hate to see it all go to waste and get melted down. Everything located in Anderson, Indiana and I'm willing to ship just about anything as long as its feasible.
Steering column (non-tilt, manual version) - $20 Brake booster & MC - $15 Accelerator pedal & bracket (2 avail.) - $7 Brake pedal & bracket (for automatic) - $10 Clutch & brake pedals & bracket w/linkage - $30 "Scottsdale 20" emblems (2 avail.)- $5 ea. Blue shoulder belts - $10 ea. Heater control panel - $5 Front 10 bolt 6-lug, needs driver's side lockout, 3.08 I believe - $50 Rear 10 bolt 6-lug, welded, 3.08 I believe - $50 Chrome front bumper, very good shape, with marker lights - $40 (pic on request) Headlight & engine wiring harnesses(may not be 100% complete) - $5 ea. Main in-cab wiring harness w/fuse panel(may not be 100% complete) - $7 Windshield (fits '73-'87), no cracks, w/rearview mirror & antenna - $100 Blue sunvisors, OK shape, - $2 ea. Wiper switch (non-delay) - $1 Wiper motor - $5 Wiper linkage & studs - $5 Parking brake pedal & bracket - $10 Cowl panel, black, no rust, fits '81-'87 (I think) - $10 Heater motor (not sure if it works) - $5 Hood hinges (bolt to cowl) - $5 Power steering boxes (2 avail.) - $15 Taillight lenses (2 avail.) - $2 ea. Gauge pod for '82 - $25 Individual gauges for '75 - $5 ea. ($10 for speedo) Plastic dash piece around gauges, one each for '75 and '82 - $5 ea. Glove box, blue - $5 I've got more parts than this, so if you need something just speak up and I'll check to see if I have it laying around. I can take pictures of anything upon request. I'll try to be prompt in getting back with people but I have an extremely busy schedule and it's hard to log in and reply to messages during the week but I'll make it a point this week to do it. Thanks for looking!
__________________
This is the project that never ends, yes it goes on and on my friend.... |
|
|
|
07-11-2005, 08:00 AM
|
#2 |
|
Registered User
Join Date: Jan 2005
Location: Chapin, SC
Posts: 392
|
Got any rally wheel trim rings??
__________________
"Fighting for our freedoms....." |
|
|
|
|
07-11-2005, 08:13 AM
|
#3 |
|
Registered User
Join Date: Mar 2005
Location: Melissa, TX
Posts: 799
|
Parts
How are are the tranny to rad lines? Interested in inside wiring harness if it had all power and A/C. Also interested in under hood harness. Price and shipping for tranny lines if good, under hood harness and interior harness to 75454 please.
__________________
68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 07-11-2005 at 09:33 AM. |
|
|
|
|
07-11-2005, 09:23 AM
|
#4 |
|
Registered User
Join Date: May 2004
Location: warner robins ga
Posts: 158
|
seatbelt
can you send me picture of the seatbelts.
|
|
|
|
|
07-11-2005, 09:29 AM
|
#5 |
|
Registered User
Join Date: May 2004
Location: warner robins ga
Posts: 158
|
seatbelt
do you have a picture of seatbelts
|
|
|
|
|
07-11-2005, 11:19 AM
|
#6 |
|
Registered User
Join Date: Apr 2005
Location: Tulsa Oklahoma
Posts: 943
|
pic of bumper and shipping to 74145 i know friegt will be alittle expinsive but i cant find a good bumper like your around here let me know i can recieve freight like this a work all day long no problem i have docks and truck access
__________________
square body trucks an addiction or an investment either way they consume all my extra time and money |
|
|
|
|
07-11-2005, 11:37 AM
|
#7 |
|
Done yet?
Join Date: Jun 2005
Location: Pittsburgh
Posts: 118
|
Can I see a picture of the heater controls? You can email it to bjbishop@uss.com if it's easier than posting.
|
|
|
|
|
07-11-2005, 11:59 AM
|
#8 |
|
Registered User
Join Date: Jun 2003
Location: CT
Posts: 75
|
i need stock manifolds for a 350 and the y-pipe please. thanks
__________________
Theres no replacment for displacement! http://www.cardomain.com/memberpage/438572 1982 k10 work in progress 1984 lifted chevy k10 for sale or trade |
|
|
|
|
07-11-2005, 12:49 PM
|
#9 |
|
Waiting for Paul to Open Safe
Join Date: May 2005
Location: Everett, WA
Posts: 4,570
|
Headlight Trim?
Do you have the Quad headlights? I need the chrome trim pieces which bracket the grill [ ] on either side of the headlights.
|
|
|
|
|
07-12-2005, 09:28 AM
|
#10 |
|
Registered User
Join Date: Jan 2005
Location: Chapin, SC
Posts: 392
|
Again, wanted to ask if there was any trim rings for rally rims??
__________________
"Fighting for our freedoms....." |
|
|
|
|
07-12-2005, 03:54 PM
|
#11 |
|
Bucket of Bolts
Join Date: Dec 2003
Location: Anderson, Indiana
Posts: 455
|
Wow, I didn't expect this many responses. OK, let me go down the line here.
woody96: Sorry, the truck doesn't have rallies on it. fade94: It was a sm465 truck, so there are no tranny cooler lines. skeet85silverado: Sure, I'll send you some pics tomorrow evening. 86 GMG: I'll send you a few pics tomorrow as well and work on getting a shipping quote. ben@speedbarn: No problem, pics on their way tomorrow. offroad84chevy: Crap, I've still got that grill. I'll knock 15 more bucks off the price for being so dumb and slow in getting it to you. Just now was able to get the front clip off. Sorry, the truck didn't have an engine when I bought it so no exhaust parts. augie76: Sorry, the bezels broke when I was removing the grille and front fenders. These weren't chrome anyway, they were plastic.
__________________
This is the project that never ends, yes it goes on and on my friend.... |
|
|
|
|
07-12-2005, 04:39 PM
|
#12 |
|
Registered User
Join Date: Mar 2005
Location: Melissa, TX
Posts: 799
|
What about the wiring I asked about?
__________________
68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear |
|
|
|
|
07-12-2005, 05:20 PM
|
#13 | |
|
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,283
|
lifted steering arm for 2-4" lift?
i have a friend who would probably be interested in the front axle, and i may be interested in the SM465 and t-case if its up for sale
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
|
|
|
|
|
|
07-13-2005, 02:13 AM
|
#14 |
|
Bucket of Bolts
Join Date: Dec 2003
Location: Anderson, Indiana
Posts: 455
|
Sorry about the wiring harness, I'll get a quote on that and get it shipped to you.
Blue_71, I guess I forgot to mention that even though it was a sm465 truck, when I got it it had no engine or tranny in it, and I'm hanging on to the axles to swap into my K5. It was stock height so no lift parts. Sorry 
__________________
This is the project that never ends, yes it goes on and on my friend.... |
|
|
|
|
07-13-2005, 02:37 AM
|
#15 |
|
Registered User
Join Date: Jun 2004
Location: Los Angeles
Posts: 277
|
is the glovebox non a/c??
|
|
|
|
|
07-13-2005, 08:00 AM
|
#16 |
|
Registered User
Join Date: Mar 2005
Location: Melissa, TX
Posts: 799
|
Both harnesses that you have. If power doors, really need the wiring for them as well. Shipping to 75454. thanks
__________________
68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 07-13-2005 at 02:43 PM. |
|
|
|
|
07-13-2005, 01:37 PM
|
#17 |
|
Registered User
Join Date: Apr 2005
Location: Tulsa Oklahoma
Posts: 943
|
75-k5 any luck on a pic of bumper and freight ???? no hurry just curious at this time
__________________
square body trucks an addiction or an investment either way they consume all my extra time and money |
|
|
|
|
07-13-2005, 03:26 PM
|
#18 |
|
Bucket of Bolts
Join Date: Dec 2003
Location: Anderson, Indiana
Posts: 455
|
Sorry, didn't get up in time for work to take a pic but I will do that this afternoon, as well as take pics that I owe everyone else.
__________________
This is the project that never ends, yes it goes on and on my friend.... |
|
|
|
|
07-13-2005, 09:17 PM
|
#19 |
|
Bucket of Bolts
Join Date: Dec 2003
Location: Anderson, Indiana
Posts: 455
|
Jesse77, the truck didn't have a/c so I would say yes. I wasn't aware it made a difference on the glovebox though. Interesting.
__________________
This is the project that never ends, yes it goes on and on my friend.... |
|
|
|
|
07-13-2005, 09:28 PM
|
#20 |
|
Bucket of Bolts
Join Date: Dec 2003
Location: Anderson, Indiana
Posts: 455
|
fade94, did you still want the in-cab harness even though it didn't have A/C or power windows/doors?
__________________
This is the project that never ends, yes it goes on and on my friend.... |
|
|
|
|
07-14-2005, 10:08 AM
|
#21 |
|
Registered User
Join Date: Mar 2005
Location: Melissa, TX
Posts: 799
|
No, I guess it reall wouldn't do me any good without all the connections. Thanks though.
__________________
68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear |
|
|
|
|
07-16-2005, 01:06 AM
|
#22 |
|
Bucket of Bolts
Join Date: Dec 2003
Location: Anderson, Indiana
Posts: 455
|
So just the under hood harness or did you want to nix the whole thing? Just checking so I know how to proceed.
__________________
This is the project that never ends, yes it goes on and on my friend.... |
|
|
|
|
07-16-2005, 03:04 PM
|
#23 |
|
Registered User
Join Date: Mar 2005
Location: Melissa, TX
Posts: 799
|
Without the A/C wiring, it really doesn't help me. Thanks anyway.
__________________
68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear |
|
|
|
|
07-16-2005, 10:07 PM
|
#24 | |
|
Registered User
Join Date: Mar 2003
Location: Walker, LA
Posts: 2,925
|
Quote:
Thanks.
__________________
Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels |
|
|
|
|
|
07-18-2005, 07:04 PM
|
#25 |
|
Bucket of Bolts
Join Date: Dec 2003
Location: Anderson, Indiana
Posts: 455
|
Yeah, I believe that's what you call it, let me get a couple pics and send them your way later.
__________________
This is the project that never ends, yes it goes on and on my friend.... |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
