Emergency Brake Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dick Dale · 07-20-2005, 05:53 PM

How hard is it to replace E Brake cables and are they actually worth changing? Can I run without them? I also need to know who sells them and how much they cost. Any pictures are apreciated.

LUV2XCLR8 · 07-20-2005, 06:16 PM

Hard to replace, no, hard to find, yes, can u run w/ them, "GQ" has none

cdowns · 07-20-2005, 06:18 PM

you can run without them but if you loose a master cylinder or a brake hose ETC. you'll wonder why you didn't make the effort to replace them!!!!!!! you also probably not going to pass a safety inspection without them

they're pretty straight foward to replace / should be available at any parts house

71meangreenc10 · 07-20-2005, 06:21 PM

Its according to your experience level, its really easy to change them even the one in the cab, you will notice a difference in the ebrake, cables do stretch, never thought about running without them, check with bill athey "atheys truck parts" he should have them. There not too expensive.

Smith

JimKshortstep4x4 · 07-20-2005, 08:16 PM

Emergency brakes are really nice to have. Here is a link to Inline Tubes. They carry a complete line of e-brake cables and components. You buy the full set or whatever parts you need, cables can be obtained in steel or stainless steel.
Their sets include instructions.

http://www.inlinetube.com/

If you decide to go with e-brakes I can take a pic of our 71 2wd setup.

Jim

farside847 · 07-20-2005, 08:41 PM

I strongly suggest not running without. Ive had a brake failure before and it saved the truck!

Matt67C10 · 07-20-2005, 09:28 PM

If you've ever had a brake failure (I know from experience) you'll wonder why you ran without them. I wouldn't recommend it.

*wolfthing2000* · 07-20-2005, 09:54 PM

They are available for about all years. I had everything replaced at a brake shop on a 76 from the foot pedal to the wheels , while in there on a brake job for 180.00 dollas! Cheap insurance if not just for the truck,, yourself, family and everyone else out there.
Just do it. LMC has them

07-20-2005, 05:53 PM	#1
Dick Dale Excelsior, You Fathead. Join Date: Jun 2004 Location: Valparaiso, In Posts: 937	Emergency Brake Question How hard is it to replace E Brake cables and are they actually worth changing? Can I run without them? I also need to know who sells them and how much they cost. Any pictures are apreciated. __________________ Go Navy. The Sea Is Ours. Budget 350 Build http://67-72chevytrucks.com/vboard/s...38#post2264638

07-20-2005, 06:16 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Hard to replace, no, hard to find, yes, can u run w/ them, "GQ" has none __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-20-2005, 06:18 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	you can run without them but if you loose a master cylinder or a brake hose ETC. you'll wonder why you didn't make the effort to replace them!!!!!!! you also probably not going to pass a safety inspection without them they're pretty straight foward to replace / should be available at any parts house __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

07-20-2005, 06:21 PM	#4
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Its according to your experience level, its really easy to change them even the one in the cab, you will notice a difference in the ebrake, cables do stretch, never thought about running without them, check with bill athey "atheys truck parts" he should have them. There not too expensive. Smith __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

07-20-2005, 08:41 PM	#6
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	I strongly suggest not running without. Ive had a brake failure before and it saved the truck! __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

07-20-2005, 08:16 PM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Emergency brakes are really nice to have. Here is a link to Inline Tubes. They carry a complete line of e-brake cables and components. You buy the full set or whatever parts you need, cables can be obtained in steel or stainless steel. Their sets include instructions. http://www.inlinetube.com/ If you decide to go with e-brakes I can take a pic of our 71 2wd setup. Jim

07-20-2005, 09:28 PM	#7
Matt67C10 Registered User Join Date: Jun 2005 Location: Slatington, PA Posts: 536	If you've ever had a brake failure (I know from experience) you'll wonder why you ran without them. I wouldn't recommend it. __________________ 67 C10 LWB Stepside- 250cid 6, 3speed

07-20-2005, 09:54 PM	#8
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	They are available for about all years. I had everything replaced at a brake shop on a 76 from the foot pedal to the wheels , while in there on a brake job for 180.00 dollas! Cheap insurance if not just for the truck,, yourself, family and everyone else out there. Just do it. LMC has them

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.