Progress at last!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigred66 · 08-28-2005, 07:29 PM

THANK YOU!!! To every one on here that made this possible for me to do.

bigred66 · 08-28-2005, 07:32 PM

:happy:

zenish · 08-28-2005, 07:35 PM

you should see if you can lower it some.

bigred66 · 08-28-2005, 07:37 PM

ya i need to get that front end down! some more

forcedinduction · 09-05-2005, 07:54 AM

Very Impressive! Good job!

66+81 · 09-05-2005, 04:14 PM

It's to high up. Is that a regular long bed? It looks a lot longer than any I've ever seen. Could just be because it's so low.

matthufham · 09-05-2005, 04:30 PM

sweet, what's keeping the front so high?

a squarecan · 09-05-2005, 06:50 PM

Very nice! Kinda wierd to see a stock longbed on the ground. Hopefully I can have mine sitting like that in a month or so. Once you get the front down a little more it will be 1 sick truck!

Keith

shortbed70 · 09-05-2005, 07:45 PM

What did you do to get it that low?

el curioso · 09-05-2005, 08:20 PM

How about some close up's of the notch of you dont mind showing your set up cuz im in a bit of a budge on where to mount the air bags on my friends 65. By the way long bed looks killer.

bigred66 · 09-06-2005, 11:08 PM

ok here ya go the front one problem is big tires and my arms is on the ground (well they were with smaller tires) need do so some cutting. I have 3 inch drop spindles up front with disc brake kit. And running cups top(2.5”) and bottom(1.5”) if I remember right…..I got the 98+ Chevy kit from SD and cut the top on in half and I believe the bottom to 1.5 ….

The back I have SD 10 notch and some CPP 2 in drop blocks (I would recommend making your one and going with 3”) and made my own bag mounts (if you look close I had to run a support accost the two so it did not twist my frame) it is not be best bag placement takes about 100+ PSI to move it and about 130 to get it up most the way.

Sorry for the pore English hope I helped some p.s alot of bad words is how i got this low

bigred66 · 09-06-2005, 11:14 PM

o

bigred66 · 09-06-2005, 11:17 PM

Thanks Every One!!

Slammed66 · 09-07-2005, 09:30 PM

That looks AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

nice work man

haha im opposite , I havent done the back enough , but I can slam the front

very very cool, you gonna do a drop member or z the frame

LOWERED LONG BOX

u2slow · 09-08-2005, 12:40 AM

I guess I'm not a fan of the "somebody stole my frame" look.

a squarecan · 09-08-2005, 12:48 AM

The back end looks great! I am just curious does your notch actually lean outwards or is it just the angle the pix were takin at? Either way it looks cool.

Keith

Woogeroo · 09-08-2005, 06:04 AM

looks well done Bigred - nice.

So, you guys in the 'eat dirt' crowd... ya'll just ride around with the rear end exposed or do ya'll put some kinda cover over the back? jes' wunderin'. I understand bigred's is a work in progess...

-W

gostranger · 09-08-2005, 06:38 AM

the truck looks awesome to me thanks for the pics keep us updated on the progress!!!!

a squarecan · 09-08-2005, 10:26 AM

Hey Woog, it all depends on the person...

Lots of people do both, I personally am going to leave it open for now.

Keith

bigred66 · 09-08-2005, 11:48 PM

Ya with that funky frame my notch goes out like it looks in the pics. I still don’t know how I will drop the front more. I am not very mechanically incline and both scare me. Yes, I plan on putting the bed back in but that will be awhile. The wife has been given the stop spending money on the truck glare when I ask to buy parts.

DM310 · 09-09-2005, 12:36 AM

You have to ask to buy parts?.............. where the hell are your balls man....... haha j/k I am in the same boat....

Looks good

Woogeroo · 09-09-2005, 05:47 AM

Quote:

Originally Posted by a squarecan

Hey Woog, it all depends on the person...

Lots of people do both, I personally am going to leave it open for now.

Keith

ah.

I was lookin' at Bigred's pics of his bed and I was recalling a '73 split bumper camaro a pal of mine had one time... it had big honkin' rear wheels, but it had not been 'tubbed'. Someone who had it before, had actually bent out, added metal to... and reshaped the feder and quarter panel like it had always been that way - basically a fender flare that you didn't notice. It also had crazy paint job on it, so u never noticed it unless you were a camaro freak or another camaro of similiar vintage was sittin' nearby.

Now I know this kinda thing would be $$$ or a lot of work.. prolly both - but the idea just popped in my head... to apply something similiar to the inside of the bed...

but I know nothin' about the dropped trucks. hah.

just a zany idea I had lookin' at big red's ride...

-W

bigred66 · 09-10-2005, 11:34 PM

had to share

took this at a show today

08-28-2005, 07:29 PM	#1
bigred66 Registered User Join Date: Mar 2005 Location: Pineville, Mo Posts: 123	Progress at last!! THANK YOU!!! To every one on here that made this possible for me to do. Attached Images __________________ Atom (bigRed66) 1966- C10 1995- Wide Body Talon 1987- Dodge Raider (4 sale) 2000- 4-door Nissan Frontier 2003- Ford Focus (wife)

08-28-2005, 07:32 PM	#2
bigred66 Registered User Join Date: Mar 2005 Location: Pineville, Mo Posts: 123	:happy: Attached Images __________________ Atom (bigRed66) 1966- C10 1995- Wide Body Talon 1987- Dodge Raider (4 sale) 2000- 4-door Nissan Frontier 2003- Ford Focus (wife)

08-28-2005, 07:35 PM	#3
zenish Registered User Join Date: Aug 2003 Location: stallings,nc Posts: 401	you should see if you can lower it some. __________________ 1964 c10 short step 1962 econoline van 1989 rs camaro 2006 yamaha vino 125 1975 goldwing

08-28-2005, 07:37 PM	#4
bigred66 Registered User Join Date: Mar 2005 Location: Pineville, Mo Posts: 123	ya i need to get that front end down! some more __________________ Atom (bigRed66) 1966- C10 1995- Wide Body Talon 1987- Dodge Raider (4 sale) 2000- 4-door Nissan Frontier 2003- Ford Focus (wife)

09-05-2005, 04:14 PM	#6
66+81 Registered User Join Date: Jul 2005 Location: Elberton GA Posts: 130	It's to high up. Is that a regular long bed? It looks a lot longer than any I've ever seen. Could just be because it's so low. __________________ 1966 Chevy C10 longbed stepside 350/350 1981 Chevy Custom Deluxe C10 short fleet 305/350

09-05-2005, 07:54 AM	#5
forcedinduction Registered User Join Date: Aug 2005 Location: Manvel, Texas Posts: 69	Very Impressive! Good job!

09-05-2005, 04:30 PM	#7
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	sweet, what's keeping the front so high?

09-05-2005, 06:50 PM	#8
a squarecan Registered User Join Date: Mar 2004 Location: Portland, Oregon Posts: 232	Very nice! Kinda wierd to see a stock longbed on the ground. Hopefully I can have mine sitting like that in a month or so. Once you get the front down a little more it will be 1 sick truck! Keith

09-05-2005, 07:45 PM	#9
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	What did you do to get it that low? __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

09-05-2005, 08:20 PM	#10
el curioso Registered User Join Date: Dec 2004 Location: El paso, Tx. Posts: 428	How about some close up's of the notch of you dont mind showing your set up cuz im in a bit of a budge on where to mount the air bags on my friends 65. By the way long bed looks killer.

09-06-2005, 11:08 PM	#11
bigred66 Registered User Join Date: Mar 2005 Location: Pineville, Mo Posts: 123	ok here ya go the front one problem is big tires and my arms is on the ground (well they were with smaller tires) need do so some cutting. I have 3 inch drop spindles up front with disc brake kit. And running cups top(2.5”) and bottom(1.5”) if I remember right…..I got the 98+ Chevy kit from SD and cut the top on in half and I believe the bottom to 1.5 …. The back I have SD 10 notch and some CPP 2 in drop blocks (I would recommend making your one and going with 3”) and made my own bag mounts (if you look close I had to run a support accost the two so it did not twist my frame) it is not be best bag placement takes about 100+ PSI to move it and about 130 to get it up most the way. Sorry for the pore English hope I helped some p.s alot of bad words is how i got this low Attached Images __________________ Atom (bigRed66) 1966- C10 1995- Wide Body Talon 1987- Dodge Raider (4 sale) 2000- 4-door Nissan Frontier 2003- Ford Focus (wife) Last edited by bigred66; 09-06-2005 at 11:11 PM.

09-06-2005, 11:14 PM	#12
bigred66 Registered User Join Date: Mar 2005 Location: Pineville, Mo Posts: 123	o Attached Images __________________ Atom (bigRed66) 1966- C10 1995- Wide Body Talon 1987- Dodge Raider (4 sale) 2000- 4-door Nissan Frontier 2003- Ford Focus (wife)

09-06-2005, 11:17 PM	#13
bigred66 Registered User Join Date: Mar 2005 Location: Pineville, Mo Posts: 123	Thanks Every One!! __________________ Atom (bigRed66) 1966- C10 1995- Wide Body Talon 1987- Dodge Raider (4 sale) 2000- 4-door Nissan Frontier 2003- Ford Focus (wife)

09-07-2005, 09:30 PM	#14
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	That looks AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! nice work man haha im opposite , I havent done the back enough , but I can slam the front very very cool, you gonna do a drop member or z the frame LOWERED LONG BOX __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

09-08-2005, 12:40 AM	#15
u2slow Web Wheeler Join Date: Jan 2000 Location: BC, Canada, eh? Posts: 388	I guess I'm not a fan of the "somebody stole my frame" look. __________________ '66 C10 longstep - Clifford equiped '84 C20 Suburban 6.2L - awaiting 4x4 conversion '91 V3500 Crewcab - awaiting diesel swap



Register or Log In To remove these advertisements.

09-08-2005, 12:48 AM	#16
a squarecan Registered User Join Date: Mar 2004 Location: Portland, Oregon Posts: 232	The back end looks great! I am just curious does your notch actually lean outwards or is it just the angle the pix were takin at? Either way it looks cool. Keith

09-08-2005, 06:04 AM	#17
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	looks well done Bigred - nice. So, you guys in the 'eat dirt' crowd... ya'll just ride around with the rear end exposed or do ya'll put some kinda cover over the back? jes' wunderin'. I understand bigred's is a work in progess... -W

09-08-2005, 06:38 AM	#18
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	the truck looks awesome to me thanks for the pics keep us updated on the progress!!!!

09-08-2005, 10:26 AM	#19
a squarecan Registered User Join Date: Mar 2004 Location: Portland, Oregon Posts: 232	Hey Woog, it all depends on the person... Lots of people do both, I personally am going to leave it open for now. Keith Last edited by a squarecan; 09-08-2005 at 10:26 AM.

09-08-2005, 11:48 PM	#20
bigred66 Registered User Join Date: Mar 2005 Location: Pineville, Mo Posts: 123	Ya with that funky frame my notch goes out like it looks in the pics. I still don’t know how I will drop the front more. I am not very mechanically incline and both scare me. Yes, I plan on putting the bed back in but that will be awhile. The wife has been given the stop spending money on the truck glare when I ask to buy parts. __________________ Atom (bigRed66) 1966- C10 1995- Wide Body Talon 1987- Dodge Raider (4 sale) 2000- 4-door Nissan Frontier 2003- Ford Focus (wife)

09-09-2005, 12:36 AM	#21
DM310 Registered User Join Date: Jan 2005 Location: Los Angeles Posts: 256	You have to ask to buy parts?.............. where the hell are your balls man....... haha j/k I am in the same boat.... Looks good __________________ 66 C10 (under construction) 1.5" crossmember drop 2" Z'ed frame 8" rear notch Watts-link Bagged DJM 3" spindles

09-10-2005, 11:34 PM	#23
bigred66 Registered User Join Date: Mar 2005 Location: Pineville, Mo Posts: 123	had to share took this at a show today Attached Images __________________ Atom (bigRed66) 1966- C10 1995- Wide Body Talon 1987- Dodge Raider (4 sale) 2000- 4-door Nissan Frontier 2003- Ford Focus (wife)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.