3 Gauge Pod piller pc for`95-up - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 10-15-2005, 11:33 AM

I don`t have my`95 anymore.This gauge pod is new in box from Summit.It`s the full-pillar type,replaces factory trim.I also have a spray can of custom mixed grey plastic interior paint(PPG) if that`s what you need:Pod:$30+ride/Paint:$10+ride.The pillar is $45 from Summit(+ride).They paint is $16+/- at a paint supplier.

phantom dually · 10-17-2005, 07:46 PM

Im interested. Do you have pics??

**special-K** · 10-18-2005, 08:07 AM

I`ll get you some.

phantom dually · 10-19-2005, 09:28 PM

Send to Jegray@insightbb.com

**special-K** · 10-26-2005, 10:42 PM

99-2door · 11-01-2005, 07:27 PM

What do you do at the top where the factory piece goes above the door?

**special-K** · 11-02-2005, 08:56 AM

The thing fits over,I think.I haven`t opened the packet with instructions.There are little snap-buttons in the packet.I was told it won`t work on the 88-94 interior.Just yesterday I went out and tryed it on my`92.It was tight for slipping between pillar and dash and the bottom pod is tight against the top of the dash around the instrument cluster.I trimmed thr bottom and it`ll work.So....not for sale anymore.Now I need Lt.Biege paint.
BTW,it`s an Autometer part.(just noticed)

99-2door · 11-05-2005, 06:23 PM

So it fits over it. In your first post you said it replaced it.

I need to get one of these for my 95.

**special-K** · 11-17-2005, 08:34 AM

OOps,sorry.I thought it did.To be honest,I hadn`t really looked at it or thought about it.It was still in the box when I originally listed it.It`s made by AutoMeter and it comes with little plastic snap-plugs.I was told it wouldn`t work on the earlier interior.The bottom pod is against the dash,but will work.

10-15-2005, 11:33 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	3 Gauge Pod piller pc for`95-up I don`t have my`95 anymore.This gauge pod is new in box from Summit.It`s the full-pillar type,replaces factory trim.I also have a spray can of custom mixed grey plastic interior paint(PPG) if that`s what you need:Pod:$30+ride/Paint:$10+ride.The pillar is $45 from Summit(+ride).They paint is $16+/- at a paint supplier. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 10-29-2005 at 10:05 AM.

10-17-2005, 07:46 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Re: 3 Gauge Pod piller pc for`95-up Im interested. Do you have pics?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-18-2005, 08:07 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 3 Gauge Pod piller pc for`95-up I`ll get you some. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-19-2005, 09:28 PM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Re: 3 Gauge Pod piller pc for`95-up Send to Jegray@insightbb.com __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-26-2005, 10:42 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 3 Gauge Pod piller pc for`95-up __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-01-2005, 07:27 PM	#6
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Re: 3 Gauge Pod piller pc for`95-up What do you do at the top where the factory piece goes above the door? __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

11-02-2005, 08:56 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 3 Gauge Pod piller pc for`95-up The thing fits over,I think.I haven`t opened the packet with instructions.There are little snap-buttons in the packet.I was told it won`t work on the 88-94 interior.Just yesterday I went out and tryed it on my`92.It was tight for slipping between pillar and dash and the bottom pod is tight against the top of the dash around the instrument cluster.I trimmed thr bottom and it`ll work.So....not for sale anymore.Now I need Lt.Biege paint. BTW,it`s an Autometer part.(just noticed) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-05-2005, 06:23 PM	#8
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Re: 3 Gauge Pod piller pc for`95-up So it fits over it. In your first post you said it replaced it. I need to get one of these for my 95. __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

11-17-2005, 08:34 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 3 Gauge Pod piller pc for`95-up OOps,sorry.I thought it did.To be honest,I hadn`t really looked at it or thought about it.It was still in the box when I originally listed it.It`s made by AutoMeter and it comes with little plastic snap-plugs.I was told it wouldn`t work on the earlier interior.The bottom pod is against the dash,but will work. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.