Its Mine the World Famous 67 Dragtruck - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 10-31-2005, 03:09 PM

Coming along great. Keep us posted.

djracer · 10-31-2005, 03:24 PM

Its a 60 over 454 with merlin heads and intake 14 to 1 Wiseco domes Lunati pro mod rods steel crank roller cam. I ran this same motor in a pretty heavy 67 camaro injected on alcohol without Nos and it ran 9.20 at 143mph! I hope to run close to that in my truck on the motor but well into the 8's on the spray!

**Yukon Jack** · 10-31-2005, 03:34 PM

Sounds awesome!

1969 C/K CST · 10-31-2005, 04:54 PM

krue · 10-31-2005, 04:56 PM

Make sure to post some pics of that bad boy in action. Video would be better.

djracer · 10-31-2005, 06:18 PM

unfortunately it'll be a little while before I get to race it but I can't wait I'm going to try to get it in real soon!

A.P. · 10-31-2005, 06:38 PM

That is a great looking engine.

Purs · 10-31-2005, 08:22 PM

sounds like sweet combo. I'm partial to the valve covers....

PLavelle · 10-31-2005, 08:38 PM

Awesome!

tommy graham · 10-31-2005, 08:55 PM

Looking good! Can't wait to see those e.t.slips! How much spray can you run with your NOS system?
tommy g

phantom dually · 10-31-2005, 09:09 PM

Very Nice!!

tommy graham · 10-31-2005, 09:53 PM

Looks Great! What weight are you hoping to get the truck down to? Are you going to run a vacuum pump?
tg

djracer · 10-31-2005, 10:56 PM

Tommy G

It starts at 200 and goes to 600. I'll probably only run about 300!

djracer · 10-31-2005, 11:01 PM

Tg
I'm hoping to get it down to around 2800 with my 200! I have my fingers crossed! I do have a GZ Motorsports vacuum pump.

tommy graham · 10-31-2005, 11:49 PM

Is the cage from S&W? If you have more pics of the front end, please post them or e-mail me direct.
Thanks, Looking Good!
tg

djracer · 11-01-2005, 01:33 AM

the front end is a fatman bolt in setup I don't have many pictures of it! The cage was custom done it has a funny car cage in it! I'll try to post a couple pictures of the cage!

Deuce · 11-01-2005, 01:49 AM

Did you install the front suspension?? Do you like it?? Is it worth the money in your opinion??

djracer · 11-01-2005, 01:54 AM

It was on the truck when I got it but I have heard nothing but good things about the setup!

Joe67 · 11-01-2005, 08:44 AM

Quote:

Originally Posted by djracer

I'm going to try to stab it in this week! It'll at least make the truck sit right. I'll shoot some pics as I go and some tranny shots its pretty mean also!

Oh damn, I think I just peed a little

Looks great

**N2TRUX** · 11-01-2005, 09:08 AM

Big Motor....!

67Fleet · 11-01-2005, 09:18 AM

That thing makes me happy in the pants.

chevyfarmer · 11-01-2005, 11:23 AM

As they say, no replacement for displacement!!! Looks great!! Big Dollar Big Block, money very well spent!

Rdrdave · 11-01-2005, 05:01 PM

Going fast just sittin' there! Nice!

GMan69 · 11-01-2005, 08:02 PM

Kevin, lookin' AWESOME!!! Let me know when you're going to the track. It would be worth the 250 mile ride to watch.

djracer · 11-01-2005, 08:40 PM

I'll keep you guys and gals posted! I'll probably just run it on the motor first to get the bugs out. I will probably have to have wheelie bars! The ones I want are 629.00!

10-31-2005, 03:09 PM	#76
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: drag truck progress Coming along great. Keep us posted. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-31-2005, 03:24 PM	#77
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Look what I got back yesterday! Its a 60 over 454 with merlin heads and intake 14 to 1 Wiseco domes Lunati pro mod rods steel crank roller cam. I ran this same motor in a pretty heavy 67 camaro injected on alcohol without Nos and it ran 9.20 at 143mph! I hope to run close to that in my truck on the motor but well into the 8's on the spray! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-31-2005, 03:34 PM	#78
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Look what I got back yesterday! Sounds awesome! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-31-2005, 04:54 PM	#79
1969 C/K CST A.K.A- Crummy Join Date: Jun 2005 Location: NC foothills Posts: 3,025	Re: Look what I got back yesterday! __________________ 2003 Silverado Z71 Are fishermen all liars?

10-31-2005, 04:56 PM	#80
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Look what I got back yesterday! Make sure to post some pics of that bad boy in action. Video would be better. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-31-2005, 06:18 PM	#81
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Look what I got back yesterday! unfortunately it'll be a little while before I get to race it but I can't wait I'm going to try to get it in real soon! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-31-2005, 06:38 PM	#82
A.P. Black 72 Chevy Join Date: May 2002 Location: Los Angeles, California Posts: 662	Re: Look what I got back yesterday! That is a great looking engine.

10-31-2005, 08:22 PM	#83
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	Re: Look what I got back yesterday! sounds like sweet combo. I'm partial to the valve covers.... __________________ "Experience is what you get when you didn't get what you wanted."

10-31-2005, 08:38 PM	#84
PLavelle Registered User Join Date: May 2004 Location: Lakeville, MA Posts: 154	Re: Look what I got back yesterday! Awesome! __________________ 1967 Chevy C10 Stepside - Vortech supercharged - Currently for sale

10-31-2005, 08:55 PM	#85
tommy graham Registered User Join Date: Oct 2005 Location: Texas Posts: 21	Re: Look what I got back yesterday! Looking good! Can't wait to see those e.t.slips! How much spray can you run with your NOS system? tommy g __________________ 1970 stepside 509 Best E.T. 9.41 @ 142mph (Oct 2004) Street Legal through the exhaust

10-31-2005, 09:09 PM	#86
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Re: Look what I got back yesterday! Very Nice!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-31-2005, 09:53 PM	#87
tommy graham Registered User Join Date: Oct 2005 Location: Texas Posts: 21	Re: drag truck progress Looks Great! What weight are you hoping to get the truck down to? Are you going to run a vacuum pump? tg __________________ 1970 stepside 509 Best E.T. 9.41 @ 142mph (Oct 2004) Street Legal through the exhaust

10-31-2005, 10:56 PM	#88
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Look what I got back yesterday! Tommy G It starts at 200 and goes to 600. I'll probably only run about 300! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-31-2005, 11:01 PM	#89
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: drag truck progress Tg I'm hoping to get it down to around 2800 with my 200! I have my fingers crossed! I do have a GZ Motorsports vacuum pump. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-31-2005, 11:49 PM	#90
tommy graham Registered User Join Date: Oct 2005 Location: Texas Posts: 21	Re: drag truck progress Is the cage from S&W? If you have more pics of the front end, please post them or e-mail me direct. Thanks, Looking Good! tg __________________ 1970 stepside 509 Best E.T. 9.41 @ 142mph (Oct 2004) Street Legal through the exhaust



Register or Log In To remove these advertisements.

11-01-2005, 01:33 AM	#91
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: drag truck progress the front end is a fatman bolt in setup I don't have many pictures of it! The cage was custom done it has a funny car cage in it! I'll try to post a couple pictures of the cage! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-01-2005, 01:49 AM	#92
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Re: drag truck progress Did you install the front suspension?? Do you like it?? Is it worth the money in your opinion?? __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

11-01-2005, 01:54 AM	#93
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: drag truck progress It was on the truck when I got it but I have heard nothing but good things about the setup! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-01-2005, 09:08 AM	#95
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Look what I got back yesterday! Big Motor....! __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-01-2005, 09:18 AM	#96
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: Look what I got back yesterday! That thing makes me happy in the pants. __________________ -Bret 67 short-fleet sold!

11-01-2005, 11:23 AM	#97
chevyfarmer Registered User Join Date: Feb 2005 Location: Owosso, Mi Posts: 242	Re: Look what I got back yesterday! As they say, no replacement for displacement!!! Looks great!! Big Dollar Big Block, money very well spent! __________________ 67 short wide 355ci 3 on tree 69 short wide 250ci 3 on tree 68 long wide 283 3 on tree 72 2wd Blazer project 454 5 speed

11-01-2005, 05:01 PM	#98
Rdrdave Broke and still trying Join Date: Apr 2003 Location: Alameda, CA Posts: 562	Re: Look what I got back yesterday! Going fast just sittin' there! Nice!

11-01-2005, 08:02 PM	#99
GMan69 Registered User Join Date: Mar 2001 Location: Hernando, MS USA Posts: 1,152	Re: Look what I got back yesterday! Kevin, lookin' AWESOME!!! Let me know when you're going to the track. It would be worth the 250 mile ride to watch. __________________ George Morgan Hernando, MS '69 C-10 swb fleetside '72 GMC swb Stepside

11-01-2005, 08:40 PM	#100
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Look what I got back yesterday! I'll keep you guys and gals posted! I'll probably just run it on the motor first to get the bugs out. I will probably have to have wheelie bars! The ones I want are 629.00! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.