Wanted

[ric]

A complete brake pedal assembly for a 1/2 ton with an automatic. I need the pedal, pad, mounting bolt and nut, metal sleeve and plastic bushing, brake light bracket, the brake pedal rod to the booster and the clip that secures the rod to the pedal. This is for an '81 K10 cab.

Removable tunnel cover for a 4x4 pickup, the hole for the transfer case must be on the passenger side. Must be for a standard cab pickup with an automatic transmission. This is for an '81 K10 cab.

Working stock am/fm stereo radio with knobs and wiring connector. This is for an '81 K10 cab.

Rear stepside fenders, braces, step and step braces.

Email pix to videos@bright.net.

Thanks.

ric

[a28doc]

ric I have a working am/fm stock radio out of an 87 only thing wrong with it is the needle doesnt move to show what staion u are on you can have it if you wanna come pick it up im bout 35 mins south of cols
Doc

[bisquik65]

I have a auto brake pedal setup...$40 includes shipping to you...I will post you a pic tomorrow.Thanks,Erick

And i have the floor hump cover also..for $40 includes shipping.
The spots you see is undercoating,not rust...

Buy 2 items get one am/fm radio free..The clear lens is loose,can be ez fixed up...And it worked when pulled...

[ric]

Erick,

Please measure the tunnel cover. GM apparently made at least two versions of these. One is roughly 22-3/8" and the other one is 25-3/4" long. I need the longer version. The top looks good what does it look like underneath?

I also need a heater control unit for an '81. Happen to have a instrument gauge cluster?

Thanks.

ric

[bisquik65]

Originally Posted by ric

Erick,

Please measure the tunnel cover. GM apparently made at least two versions of these. One is roughly 22-3/8" and the other one is 25-3/4" long. I need the longer version. The top looks good what does it look like underneath?

I also need a heater control unit for an '81. Happen to have a instrument gauge cluster?

Thanks.

ric

I bought this hump from teeitup not to long ago,It has undercoating on the bottom,I will measure it..

With or without a/c on the control
And with or without guages on the cluster

I should have it all here..2 more trucks coming is this week...And can send you one big box for a super deal too...Just let me know,Thanks,Erick

[ric]

Erick,

That would be a heater control for a non-ac truck.

Looking for a gauge panel, not the standard panel with just the lights. I have a gauge panel, but not sure it functions properly. Is the shift indicator included? I need one of these whether I buy another instrument cluster or not.

Looking for blue interior parts, specifically the lower carpet panels, door pulls with end caps, trim around the inside door handle, ash tray, glove box and carpet.

Happen to have any stepside fenders, steps, braces, rear bumper and rear bumper hangers?

Thanks. ( you can email me at videos@bright.net if you'd prefer, I see emails sooner...just a thought)

ric

[bisquik65]

I have several trucks coming in here..And one is just a frame with a super nice black stepside bed on it...No rust...Its going to snow 12+ inches here tonight and tomorrow and i will need a few days to get that one here...

The heater control,i have a/c ones...and the guage cluster is no problem..with auto indacator..I can do the brake pedal setup,floor hump and cluster..for $100 shipped and your free radio....I will get pics of the bed as soon as i get it here...I am in western n.c. in the mountains...Bakersville if you can find it on the map...

Originally Posted by ric

Erick,

That would be a heater control for a non-ac truck.

Looking for a gauge panel, not the standard panel with just the lights. I have a gauge panel, but not sure it functions properly. Is the shift indicator included? I need one of these whether I buy another instrument cluster or not.

Looking for blue interior parts, specifically the lower carpet panels, door pulls with end caps, trim around the inside door handle, ash tray, glove box and carpet.

Happen to have any stepside fenders, steps, braces, rear bumper and rear bumper hangers?

Thanks. ( you can email me at videos@bright.net if you'd prefer, I see emails sooner...just a thought)

ric

[ric]

Erick,

Based on what you said you must have neasured the tunnel and its the longer version...right?

Any blue interior parts?

Also, I need back brake backing plates, both sides for a stand 12 bolt rear end.

Is the step side bed sitting on a 4x4 frame?

Thanks.

ric

[bisquik65]

Yes it is sitting on a 4x4 shortbed frame...3.73 running gears...too...rolling...no cab or front clip. no motor trans or nothing...but someting to work with.....

The hump is the 22 3/8 one...but i have more....give me a day or 2 to find them...Thanks,Erick

Originally Posted by ric

Erick,

Based on what you said you must have neasured the tunnel and its the longer version...right?

Any blue interior parts?

Also, I need back brake backing plates, both sides for a stand 12 bolt rear end.

Is the step side bed sitting on a 4x4 frame?

Thanks.

ric

[ric]

Erick,

Here's the parts I need sooner than later. We can talk about the bed when you get the pix.

1. Indicator for the shifter, 3 speed automatic
2. 4x4 tunnel cover, the long one.
3. Rear brake backing plates, GM 12 bolt.
4. Brake pedal assembly for an automatic.

Hopefully the radio is still part of the deal.

Let me know.

Thanks.

ric