parting out 82 crew cab dually - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

454malibuwagon · 11-23-2005, 08:37 PM

litdave, yes i am planning on selling everything off this truck i want to get it out of my yard, if you want to call me about it i can give you more info on it
1-712-551-2245

6camaro9, still never got email try to send it again

benoit45, it has dual tanks on it but i not sure what shape the mounts are in as it has plastic covers over them , how many do you need as i have a couple of tanks around with the mounts on them yet

Thanks, Chris

Dean · 11-23-2005, 08:45 PM

Let me know if you have the 30 emblems from the front fenders or a big block fan shroud.

benoit454 · 11-25-2005, 08:06 PM

My tank is kinda hard to explain it has the bracket the mounts to the driver's frame rail, then a 2nd bracket mad just the same as the frame one, but with one hole in center bottom for a big stud to stick thru, and one hole on the side up by the rocker panel for the metal band. I only need the 2 frame brackets and the 2 outer brackets, my straps are ok but if you have the whole setup that be cool, so basically everything that mounts the tank. But my 76 and most I've seen here only have the one bracket up front and back, that bolts to the frame, then the straps mount to them. I can't use thoose kind.

kevinr1970 · 12-08-2005, 02:44 AM

I'm looking for seat brackets for the front bench seat - assuming the CC has a flat floor. Also assuming that a bench seat is the same in a reg cab and a CC with different brackets. If I'm wrong someone let me know.
Trying to put a bench seat in my Blazer.

454malibuwagon · 12-09-2005, 09:22 AM

i have the brackets off the bench as i went to buckets in it, but i dont know if there is any diff. between them and ones out of a reg cab, if you want them i would take 20 plus shipping
Thanks, Chris

86 GMG · 12-09-2005, 12:11 PM

hey! Chris should have asked this when i bought the fenders but i didnt see it then ???? but the grey dash can you send me some pics www.sfstul@yahoo.com
if it hasnt sold yet i say that 82c10 was asking about it if it is in the middle of a deal let me know if it falls through thanks matt

aesj2 · 12-09-2005, 08:00 PM

What about the rear fenders. Any good? Pics? Price?

stkcode · 12-10-2005, 02:27 PM

I'd be interested in the overhead console and bracket...if it's not already spoken for. Any possibilities of a price and/or pics? Thanks!

71swb4x4 · 12-10-2005, 03:05 PM

454malibuwagon, we're practically neighbors!
Do you still have the 454's?

454malibuwagon · 12-11-2005, 09:37 PM

86 GMC i will get pics to you of the dash pad

aesj2 give me you email address and i will get you pics of rear fenders and price

stkcode give me your email address and iwll get pics of overhead console and price

71swb4x4 yes i still have both 454s

*bisquik65* · 12-11-2005, 11:17 PM

Quote:

Originally Posted by kevinr1970

I'm looking for seat brackets for the front bench seat - assuming the CC has a flat floor. Also assuming that a bench seat is the same in a reg cab and a CC with different brackets. If I'm wrong someone let me know.
Trying to put a bench seat in my Blazer.

The crew cab and burbs share the same floor pan...The blazers are different...Because the pickups have the floor raised to clear the gastank on both sides...Blazer seats are like a van on a pedastal.

71swb4x4 · 12-11-2005, 11:29 PM

Chris, does the 87 454 come with the harness and computer?
Shawn

454malibuwagon · 12-11-2005, 11:41 PM

yes it will come with the complete harness and computer also have the complete dash harness and guages and the harness for the fuel pumps and dual tanks,
Thanks, Chris

aesj2 · 12-14-2005, 12:50 AM

454malibuwagon you have a p.m., but I will also post here. email aesj2 to asmith194116@yahoo.com
Thanks.

67mbsc · 12-14-2005, 01:40 AM

I've sent yall a PM

stkcode · 12-14-2005, 09:41 PM

454malibuwagon, shot ya a pm with my email address. Thanks!

84 400 · 12-15-2005, 12:39 AM

front bumper???? vwent windows??? all of the door rubber/ window rubber if in good shape.. any pics?? if so please send to itm880@yahoo.com with prices thanks alot

84 400 · 12-15-2005, 12:41 AM

also what about rear speaker assemblys with speaker screws and wires? Yjanks agian

kevinr1970 · 12-15-2005, 02:32 AM

Quote:

Originally Posted by bisquik65

The crew cab and burbs share the same floor pan...The blazers are different...Because the pickups have the floor raised to clear the gastank on both sides...Blazer seats are like a van on a pedastal.

I thought the CC's had a flat floor?
So the Sub's and CC's have a different floor than a standard cab?

11-23-2005, 08:37 PM	#26
454malibuwagon Registered User Join Date: Apr 2004 Location: iowa Posts: 47	Re: parting out 82 crew cab dually litdave, yes i am planning on selling everything off this truck i want to get it out of my yard, if you want to call me about it i can give you more info on it 1-712-551-2245 6camaro9, still never got email try to send it again benoit45, it has dual tanks on it but i not sure what shape the mounts are in as it has plastic covers over them , how many do you need as i have a couple of tanks around with the mounts on them yet Thanks, Chris

11-23-2005, 08:45 PM	#27
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	Re: parting out 82 crew cab dually Let me know if you have the 30 emblems from the front fenders or a big block fan shroud.

11-25-2005, 08:06 PM	#28
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: parting out 82 crew cab dually My tank is kinda hard to explain it has the bracket the mounts to the driver's frame rail, then a 2nd bracket mad just the same as the frame one, but with one hole in center bottom for a big stud to stick thru, and one hole on the side up by the rocker panel for the metal band. I only need the 2 frame brackets and the 2 outer brackets, my straps are ok but if you have the whole setup that be cool, so basically everything that mounts the tank. But my 76 and most I've seen here only have the one bracket up front and back, that bolts to the frame, then the straps mount to them. I can't use thoose kind. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

12-08-2005, 02:44 AM	#29
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Re: parting out 82 crew cab dually I'm looking for seat brackets for the front bench seat - assuming the CC has a flat floor. Also assuming that a bench seat is the same in a reg cab and a CC with different brackets. If I'm wrong someone let me know. Trying to put a bench seat in my Blazer. __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

12-09-2005, 09:22 AM	#30
454malibuwagon Registered User Join Date: Apr 2004 Location: iowa Posts: 47	Re: parting out 82 crew cab dually i have the brackets off the bench as i went to buckets in it, but i dont know if there is any diff. between them and ones out of a reg cab, if you want them i would take 20 plus shipping Thanks, Chris

12-09-2005, 12:11 PM	#31
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	Re: parting out 82 crew cab dually hey! Chris should have asked this when i bought the fenders but i didnt see it then ???? but the grey dash can you send me some pics www.sfstul@yahoo.com if it hasnt sold yet i say that 82c10 was asking about it if it is in the middle of a deal let me know if it falls through thanks matt __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

12-09-2005, 08:00 PM	#32
aesj2 Registered User Join Date: Feb 2002 Location: Ferndale, Michigan, USA Posts: 94	Re: parting out 82 crew cab dually What about the rear fenders. Any good? Pics? Price?

12-10-2005, 02:27 PM	#33
stkcode Registered User Join Date: Oct 2005 Location: Apple Valley, CA Posts: 53	Re: parting out 82 crew cab dually I'd be interested in the overhead console and bracket...if it's not already spoken for. Any possibilities of a price and/or pics? Thanks! __________________ Jon 1953 GMC 930 6-71 Driptroit Screamer, 5 x 4 Twin Sticks

12-10-2005, 03:05 PM	#34
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: parting out 82 crew cab dually 454malibuwagon, we're practically neighbors! Do you still have the 454's? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-11-2005, 09:37 PM	#35
454malibuwagon Registered User Join Date: Apr 2004 Location: iowa Posts: 47	Re: parting out 82 crew cab dually 86 GMC i will get pics to you of the dash pad aesj2 give me you email address and i will get you pics of rear fenders and price stkcode give me your email address and iwll get pics of overhead console and price 71swb4x4 yes i still have both 454s

12-11-2005, 11:29 PM	#37
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: parting out 82 crew cab dually Chris, does the 87 454 come with the harness and computer? Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-11-2005, 11:41 PM	#38
454malibuwagon Registered User Join Date: Apr 2004 Location: iowa Posts: 47	Re: parting out 82 crew cab dually yes it will come with the complete harness and computer also have the complete dash harness and guages and the harness for the fuel pumps and dual tanks, Thanks, Chris

12-14-2005, 12:50 AM	#39
aesj2 Registered User Join Date: Feb 2002 Location: Ferndale, Michigan, USA Posts: 94	Re: parting out 82 crew cab dually 454malibuwagon you have a p.m., but I will also post here. email aesj2 to asmith194116@yahoo.com Thanks.

12-14-2005, 01:40 AM	#40
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Re: parting out 82 crew cab dually I've sent yall a PM

12-14-2005, 09:41 PM	#41
stkcode Registered User Join Date: Oct 2005 Location: Apple Valley, CA Posts: 53	Re: parting out 82 crew cab dually 454malibuwagon, shot ya a pm with my email address. Thanks! __________________ Jon 1953 GMC 930 6-71 Driptroit Screamer, 5 x 4 Twin Sticks



Register or Log In To remove these advertisements.

12-15-2005, 12:39 AM	#42
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: parting out 82 crew cab dually front bumper???? vwent windows??? all of the door rubber/ window rubber if in good shape.. any pics?? if so please send to itm880@yahoo.com with prices thanks alot __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

12-15-2005, 12:41 AM	#43
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: parting out 82 crew cab dually also what about rear speaker assemblys with speaker screws and wires? Yjanks agian __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.