What Pickup Parts will work on a Blazer?

[zimmy]

Hey Everyone,

I haven't been around in a while. I just picked up a 72 Chevy Blazer this afternoon. It is a blue and white 4wd.

I need to replace the rockers, floorpans, doors and front part of the rear quarter panel (closest to the doors).

Are the parts I listed interchangable with a 72 pickup? Can the doors be cut or are they "blazer specific". Are the rockers the same? I am assuming that the front lower part of the quarters are specific to the blazer.

If anyone can recommend a vendor to get parts from it would be greatly appreciated. This is for a budget buildup so a used parts source would be fine as well.

Thanks in advance for all your input.

Scott J. Zimmerman

[krue]

For used parts you can post a WTB thread on the Parts board. The doors can be cut down truck doors. For the rest I'm waiting for the answers myself.

[LUV2XCLR8]

What Krue said, and here is a link to the Board venders both new and used

http://67-72chevytrucks.com/vboard/a....php?f=15&a=10

[pound41]

Most all the front floor pan pillar sheetmetal is the same. Only one I have found so far is the outer floor panel patch is too long and has to be altered

[FRENCHBLUE72]

Everything with the exception of the quarter's can be bought aftermarket,the door can be cut down from a truck.. The quarters could be made from a fleetside truck bed to work with the blazer body... Wes at classic heartbeat has most of the parts in stock usally....www.classicheartbeat.com