Parting a 89 Suburban in SE Ohio - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddyole 69 · 01-27-2006, 12:21 AM

Like the title says I have a burb to part and then scrap what is gone already is front and rear diff front fenders and front doors 350 tbi runs but not well serp set up on motor 465 208 tranny hydraulic clutch has rust free 4 small headlight rad support headlight buckets are there as is lights and harness no grille or trim rear doors are shot all glass is good front and rear seat there and decent grey interior dash pad cracked 4 spoke wheel tilt columnn all interior is there except the 3rd seat and is in driver condition prices are required so these are what I thought of off the top of my head

Steering wheel 35 shipped
tilt column 75 and shipping
rad support 150 and shipping
4spd and xfer will not seperate 300 and shipping
serpentine off motor incudes alt h20 pump pwr steering pump and whatever else goes with it to make it work 125 and shipping
tbi and whatever else to make it functional 75 and shipping
inst cluster 25 and shipping
any other parts you want I will sell just ask and on any of the parts pickup is fine just let me know and thanks Mike

bigarmzz · 01-27-2006, 12:28 PM

Quote:

Originally Posted by muddyole 69

Like the title says I have a burb to part and then scrap what is gone already is front and rear diff front fenders and front doors 350 tbi runs but not well serp set up on motor 465 208 tranny hydraulic clutch has rust free 4 small headlight rad support headlight buckets are there as is lights and harness no grille or trim rear doors are shot all glass is good front and rear seat there and decent grey interior dash pad cracked 4 spoke wheel tilt columnn all interior is there except the 3rd seat and is in driver condition prices are required so these are what I thought of off the top of my head

Steering wheel 35 shipped
tilt column 75 and shipping
rad support 150 and shipping
4spd and xfer will not seperate 300 and shipping
serpentine off motor incudes alt h20 pump pwr steering pump and whatever else goes with it to make it work 125 and shipping
tbi and whatever else to make it functional 75 and shipping
inst cluster 25 and shipping
any other parts you want I will sell just ask and on any of the parts pickup is fine just let me know and thanks Mike

post some pics up....i might be interested in that rad support (just like to see the overall condition first)....no rust?

is the tilt column for a 4spd?...i think it says that, i just wanted to make sure first

how many miles were on the rig?

woody96 · 01-27-2006, 05:50 PM

What condition are the front driver and pass side window channels in? How about the stripping/rubber that surrounds the door and door frame? Got power window switch for the driver side? THX!

muddyole 69 · 01-27-2006, 09:14 PM

guys I have all the stuff you are asking about 4 spd tilt rad support is rust free and the window goodies I will have to check to get an accurate description mileage is over 100k for sure odometer is non op will get pics in the am thanks for looking Mike

muddyole 69 · 01-28-2006, 06:21 PM

guys I have a new camera with memory stick will get the pics asap Mike

shelby987 · 02-13-2006, 11:38 AM

I would be interested in the hydraulic clutch setup if the price is right, you have a PM.

kohler · 02-28-2006, 08:56 PM

on the tbi does that include the harness for the engine and any fuel lines

Wild83C10 · 02-28-2006, 10:43 PM

This stuff still for sale? I am interested in the tilt column if it is still around. Let me know

alf4444 · 03-03-2006, 12:29 AM

pics and shipping on the TBI set up to 84118 please!

woody96 · 03-03-2006, 12:39 PM

Once again-------What condition are the front driver and pass side window channels in? How about the stripping/rubber that surrounds the door and door frame? Got power window switch for the driver side? THX!

muddyole 69 · 03-04-2006, 05:03 AM

sorry guys not being an arse just super busy working 2 full time nite jobs to keep the wolves at bay reason for selling the parts in the first place was to gain a little cash anyway the motor runs and all the stuff to make the tbi work is whomevers for the advertised price no one has called dibs cept the one person the tilt is in good shape tight with all the correct plugs etc and key intact and the window stuff is trash hope this covers every one the rad support got sold by the other half to a core buyer for 8 bux so we are not really goin to go there not a happy boy !! win some and

lose some the parts are there for the taking I am only home wednesday afternoon each week if this is not something that you are in a hurry for I will do my best to help you out otherwise sorry no time to pull the parts Mike

kndall · 03-04-2006, 08:30 AM

dibs on the tbi pending info, does it include all wiring, lines, computer, any sensors vital to the functioning of unit? intake manifold, distributor (if neccessary for proper function) ??also shipping quote to 73160

alf4444 · 03-04-2006, 03:31 PM

i'm in no hurry so shoot me the shipping cost on the TBI whenever it's pulled

01-27-2006, 12:21 AM	#1
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Parting a 89 Suburban in SE Ohio Like the title says I have a burb to part and then scrap what is gone already is front and rear diff front fenders and front doors 350 tbi runs but not well serp set up on motor 465 208 tranny hydraulic clutch has rust free 4 small headlight rad support headlight buckets are there as is lights and harness no grille or trim rear doors are shot all glass is good front and rear seat there and decent grey interior dash pad cracked 4 spoke wheel tilt columnn all interior is there except the 3rd seat and is in driver condition prices are required so these are what I thought of off the top of my head Steering wheel 35 shipped tilt column 75 and shipping rad support 150 and shipping 4spd and xfer will not seperate 300 and shipping serpentine off motor incudes alt h20 pump pwr steering pump and whatever else goes with it to make it work 125 and shipping tbi and whatever else to make it functional 75 and shipping inst cluster 25 and shipping any other parts you want I will sell just ask and on any of the parts pickup is fine just let me know and thanks Mike __________________ hav'n fun be'n me

01-27-2006, 05:50 PM	#3
woody96 Registered User Join Date: Jan 2005 Location: Chapin, SC Posts: 392	Re: Parting a 89 Suburban in SE Ohio What condition are the front driver and pass side window channels in? How about the stripping/rubber that surrounds the door and door frame? Got power window switch for the driver side? THX! __________________ "Fighting for our freedoms....."

01-27-2006, 09:14 PM	#4
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: Parting a 89 Suburban in SE Ohio guys I have all the stuff you are asking about 4 spd tilt rad support is rust free and the window goodies I will have to check to get an accurate description mileage is over 100k for sure odometer is non op will get pics in the am thanks for looking Mike __________________ hav'n fun be'n me Last edited by muddyole 69; 01-27-2006 at 09:15 PM.

01-28-2006, 06:21 PM	#5
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: Parting a 89 Suburban in SE Ohio guys I have a new camera with memory stick will get the pics asap Mike __________________ hav'n fun be'n me

02-13-2006, 11:38 AM	#6
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: Parting a 89 Suburban in SE Ohio I would be interested in the hydraulic clutch setup if the price is right, you have a PM. __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

02-28-2006, 08:56 PM	#7
kohler Registered User Join Date: Jan 2006 Location: new york,ulster Posts: 63	Re: Parting a 89 Suburban in SE Ohio on the tbi does that include the harness for the engine and any fuel lines

02-28-2006, 10:43 PM	#8
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: Parting a 89 Suburban in SE Ohio This stuff still for sale? I am interested in the tilt column if it is still around. Let me know __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

03-03-2006, 12:29 AM	#9
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Re: Parting a 89 Suburban in SE Ohio pics and shipping on the TBI set up to 84118 please! __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

03-03-2006, 12:39 PM	#10
woody96 Registered User Join Date: Jan 2005 Location: Chapin, SC Posts: 392	Re: Parting a 89 Suburban in SE Ohio Once again-------What condition are the front driver and pass side window channels in? How about the stripping/rubber that surrounds the door and door frame? Got power window switch for the driver side? THX! __________________ "Fighting for our freedoms....."

03-04-2006, 05:03 AM	#11
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: Parting a 89 Suburban in SE Ohio sorry guys not being an arse just super busy working 2 full time nite jobs to keep the wolves at bay reason for selling the parts in the first place was to gain a little cash anyway the motor runs and all the stuff to make the tbi work is whomevers for the advertised price no one has called dibs cept the one person the tilt is in good shape tight with all the correct plugs etc and key intact and the window stuff is trash hope this covers every one the rad support got sold by the other half to a core buyer for 8 bux so we are not really goin to go there not a happy boy !! win some and lose some the parts are there for the taking I am only home wednesday afternoon each week if this is not something that you are in a hurry for I will do my best to help you out otherwise sorry no time to pull the parts Mike __________________ hav'n fun be'n me

03-04-2006, 08:30 AM	#12
kndall Registered User Join Date: Nov 2004 Location: Moore, OK..73160 Posts: 207	Re: Parting a 89 Suburban in SE Ohio dibs on the tbi pending info, does it include all wiring, lines, computer, any sensors vital to the functioning of unit? intake manifold, distributor (if neccessary for proper function) ??also shipping quote to 73160 Last edited by kndall; 03-04-2006 at 08:35 AM.

03-04-2006, 03:31 PM	#13
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Re: Parting a 89 Suburban in SE Ohio i'm in no hurry so shoot me the shipping cost on the TBI whenever it's pulled __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.