wheel clearence questions... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

obsesive23 · 05-12-2006, 01:45 AM

I'm wondering what the biggest size wheel and tire combo I can run on my 72 2wd blazer. It's getting a 4/6 drop and bags with a "c" notch in the frame. I really want to run 20x8 in front and 22x11 in the rear. My problem is I don't have the body on the frame and I'm not sure these would fit. Does someone either know if this will fit or can you measure yours for me? I really don't want to modify the frame any more than a "c" notch, the body I'm not that worried about. I don't care about laying frame, I just want everything to fit. Any help or idea's would be greatly appreciated.

obsesive23 · 05-14-2006, 03:38 AM

ttt

SCOTI · 05-14-2006, 04:40 PM

If you absolutely must get the wheels now, you simply will have to make them fit. I would wait until body & chassis are reunited to verify important measurements & then order the wheels accordingly.

XXL · 05-14-2006, 09:00 PM

Quote:

Originally Posted by SCOTI

I would wait until body & chassis are reunited to verify important measurements & then order the wheels accordingly.

05-12-2006, 01:45 AM	#1
obsesive23 Who me? Join Date: Jun 2004 Location: Bothell WA Posts: 640	wheel clearence questions... I'm wondering what the biggest size wheel and tire combo I can run on my 72 2wd blazer. It's getting a 4/6 drop and bags with a "c" notch in the frame. I really want to run 20x8 in front and 22x11 in the rear. My problem is I don't have the body on the frame and I'm not sure these would fit. Does someone either know if this will fit or can you measure yours for me? I really don't want to modify the frame any more than a "c" notch, the body I'm not that worried about. I don't care about laying frame, I just want everything to fit. Any help or idea's would be greatly appreciated. __________________ Living the dream 72 2WD Blazer, under going porter built surgery 67 GT Mustang fastback 67 Mustang coupe C/S clone 64 Falcon sprint hardtop

05-14-2006, 03:38 AM	#2
obsesive23 Who me? Join Date: Jun 2004 Location: Bothell WA Posts: 640	Re: wheel clearence questions... ttt __________________ Living the dream 72 2WD Blazer, under going porter built surgery 67 GT Mustang fastback 67 Mustang coupe C/S clone 64 Falcon sprint hardtop

05-14-2006, 04:40 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: wheel clearence questions... If you absolutely must get the wheels now, you simply will have to make them fit. I would wait until body & chassis are reunited to verify important measurements & then order the wheels accordingly. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.