Need Pic or Info on GMC 305V6 P/S Setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Erl · 04-26-2002, 08:32 AM

I am changing my 68 3/4 4x4 from manual to power steering. Since I have the big V6, which is not so common, I am having trouble. Does someone have this setup in their truck or a 68 GMC manual with pictures?

71402BB · 04-26-2002, 08:37 AM

I saw a Big truck with the 305 in it not sure if it had power steering in it. Will power steering from a big truck work on a C-10?

------------------
71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's

72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!)

68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi

Erl · 04-26-2002, 10:07 AM

All I need are the pulleys. I got a pump with large reservor and bracket from GMCPaul used. I have a power steering box and hoses (standard stuff) located. I believe the pulleys off a larger truck would work. It is possible that a large truck would have an air compressor and require a double belt pully.

------------------
68 GMC 3/4 4x4 Stepside
54 Kaiser Darrin
Dallas TX

Longhorn Man · 04-26-2002, 08:09 PM

I'm headed to a v-6 one ton GMC in the junk yard tomorow...I'll take pics if I can.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

Erl · 04-27-2002, 10:23 AM

I will be waiting for those pictures. Thanks

Slammed67 · 04-27-2002, 11:00 AM

You wouldn't be interested in a complete, very low miles, 305V6 would ya? Let me know if you are interested. It also has the power steering setup, so if you can't find a picture, let me know and I can probably get you one.

Thanks!

------------------
Current project: The "HACKstoration" 1967 GMC shortbed/fleetside, 350/700R4, air bag suspension, 18" billet wheels. Other vehicle of interest: 1957 Chevy Bel-Air 4dr hard top, 283/powerglide, lowered 3-1/2" in front and 2 inches in the rear.

Web Site: jaySpot.com AOL Screen Name: Slammed67GMC Location: Kansas City, MO

Erl · 04-27-2002, 11:16 AM

Well I am going to be in KC next week (may 4-7) for the Cast Expo. The engine I have runs well, but if the price was right. Let me know, maybe I could take a look at it.
Thanks

04-26-2002, 08:32 AM	#1
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Need Pic or Info on GMC 305V6 P/S Setup I am changing my 68 3/4 4x4 from manual to power steering. Since I have the big V6, which is not so common, I am having trouble. Does someone have this setup in their truck or a 68 GMC manual with pictures? __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

04-26-2002, 08:37 AM	#2
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	I saw a Big truck with the 305 in it not sure if it had power steering in it. Will power steering from a big truck work on a C-10? ------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

04-26-2002, 10:07 AM	#3
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	All I need are the pulleys. I got a pump with large reservor and bracket from GMCPaul used. I have a power steering box and hoses (standard stuff) located. I believe the pulleys off a larger truck would work. It is possible that a large truck would have an air compressor and require a double belt pully. ------------------ 68 GMC 3/4 4x4 Stepside 54 Kaiser Darrin Dallas TX __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

04-27-2002, 10:23 AM	#5
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	I will be waiting for those pictures. Thanks __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

04-27-2002, 11:00 AM	#6
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	You wouldn't be interested in a complete, very low miles, 305V6 would ya? Let me know if you are interested. It also has the power steering setup, so if you can't find a picture, let me know and I can probably get you one. Thanks! ------------------ Current project: The "HACKstoration" 1967 GMC shortbed/fleetside, 350/700R4, air bag suspension, 18" billet wheels. Other vehicle of interest: 1957 Chevy Bel-Air 4dr hard top, 283/powerglide, lowered 3-1/2" in front and 2 inches in the rear. Web Site: jaySpot.com AOL Screen Name: Slammed67GMC Location: Kansas City, MO __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

04-26-2002, 08:09 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I'm headed to a v-6 one ton GMC in the junk yard tomorow...I'll take pics if I can. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

04-27-2002, 11:16 AM	#7
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Well I am going to be in KC next week (may 4-7) for the Cast Expo. The engine I have runs well, but if the price was right. Let me know, maybe I could take a look at it. Thanks __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.