How hard to bag the truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

abadsvt · 08-22-2006, 01:32 PM

I was wanting to bag the truck. Front and back. I was hoping to get it as low as possible without cutting the floor unless it still sits to high. Does anyone have pics of there truck without the floor cut and then someone who does without a body drop. Also i was looking at the air ride setup. The bolt on kit. I can easily weld it but i was curious how hard it is to do it all your self. C-notching and what not. Is it better to buy everything seperate and fab it your self. I read the other post but everyone was arguing about the panhard being to short. I didn't ever see a real answere saying this is a great kit or it wasn't a great kit. I would like to best suspension setup i can afford. I plan on towing my boat alot so i want to make sure the suspension is top notch. Any comments and pics would be appreciated

bodydropped · 08-22-2006, 02:14 PM

u can always b/d ur bed floor its looks 5 times better than a bed with a big hole unless ur have a badazz setup and want to show it off

abadsvt · 08-22-2006, 02:41 PM

Do you mean raise the floor up a few inches? Thats a good idea. Where can i buy all the necessary stuff to do it my self so i can get it a little lower in the back. C-notches, 4 link, panhard, and anything else i might need. Thanks Josh

*culookn* · 08-23-2006, 08:28 AM

suididedoors.com is a good place to get all of that stuff. plus they sell kp and air ride tech parts.

bodydropped · 08-23-2006, 10:04 AM

yea suicide doors has some nice deals on parts

**N2TRUX** · 08-23-2006, 10:08 AM

What year truck?

abadsvt · 08-23-2006, 11:44 AM

1970 c10 shortbed. I will check out that website.

bagged69c10 · 08-23-2006, 01:03 PM

I got my triangulated super-lift 4 link from *****************. They typically have really good customer service and the quality is very good.

ADay73 · 08-25-2006, 08:48 PM

what will fit my 1970 cst-10 swb? I do not see that model year? I am a newbie and have one to rebuild.

*Shane* · 08-25-2006, 10:04 PM

www.ebay.com

08-22-2006, 01:32 PM	#1
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	How hard to bag the truck? I was wanting to bag the truck. Front and back. I was hoping to get it as low as possible without cutting the floor unless it still sits to high. Does anyone have pics of there truck without the floor cut and then someone who does without a body drop. Also i was looking at the air ride setup. The bolt on kit. I can easily weld it but i was curious how hard it is to do it all your self. C-notching and what not. Is it better to buy everything seperate and fab it your self. I read the other post but everyone was arguing about the panhard being to short. I didn't ever see a real answere saying this is a great kit or it wasn't a great kit. I would like to best suspension setup i can afford. I plan on towing my boat alot so i want to make sure the suspension is top notch. Any comments and pics would be appreciated Attached Images

08-22-2006, 02:14 PM	#2
bodydropped Registered User Join Date: Jan 2005 Location: beaumont,tx Posts: 757	Re: How hard to bag the truck? u can always b/d ur bed floor its looks 5 times better than a bed with a big hole unless ur have a badazz setup and want to show it off __________________ http://img.photobucket.com/albums/v5...ropped/sig.jpg

08-22-2006, 02:41 PM	#3
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: How hard to bag the truck? Do you mean raise the floor up a few inches? Thats a good idea. Where can i buy all the necessary stuff to do it my self so i can get it a little lower in the back. C-notches, 4 link, panhard, and anything else i might need. Thanks Josh Last edited by abadsvt; 08-22-2006 at 02:49 PM.

08-23-2006, 08:28 AM	#4
culookn Account Suspended Join Date: Jun 2006 Location: nj Posts: 194	Re: How hard to bag the truck? suididedoors.com is a good place to get all of that stuff. plus they sell kp and air ride tech parts.

08-23-2006, 10:04 AM	#5
bodydropped Registered User Join Date: Jan 2005 Location: beaumont,tx Posts: 757	Re: How hard to bag the truck? yea suicide doors has some nice deals on parts __________________ http://img.photobucket.com/albums/v5...ropped/sig.jpg

08-23-2006, 10:08 AM	#6
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: How hard to bag the truck? What year truck? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-23-2006, 11:44 AM	#7
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: How hard to bag the truck? 1970 c10 shortbed. I will check out that website.

08-23-2006, 01:03 PM	#8
bagged69c10 soon to be bagged64sub Join Date: Feb 2005 Location: DFW-currently phoenix Posts: 635	Re: How hard to bag the truck? I got my triangulated super-lift 4 link from ***************. They typically have really good customer service and the quality is very good. __________________ 1969 c-10, bagged, Zd, 20" Boyds SOLD!** 1964 Suburban COMING SOON Build threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=304726 1965 c-10 long bed 1993 Sierra x-cab 1999 tahoe-4/5 on 22s 2005 Chevy work truck

08-25-2006, 08:48 PM	#9
ADay73 Registered User Join Date: Jul 2006 Location: Charlotte, NC Posts: 11	Re: How hard to bag the truck? what will fit my 1970 cst-10 swb? I do not see that model year? I am a newbie and have one to rebuild.

08-25-2006, 10:04 PM	#10
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: How hard to bag the truck? www.ebay.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.