Video - The 1947 - Present Chevrolet & GMC Truck Message Board Network

st1x10 · 12-07-2006, 05:28 PM

I am looking for a video of some fast bags on a c10. If anybody has one or has seen one plz post it here. I am thinking about 1/2" valves and would like to know how fast they are. Thanks.

XXL · 12-07-2006, 07:53 PM

Not exactly what you're looking for, but...

(truck belongs to slammed67)

jimmydean · 12-07-2006, 10:38 PM

I don't have any video, but I can tell you my valves are so fast there is no adjustment when you hit the down switch. It dumps straight to the ground before the can close.

I got my dump adjusters to put on this weekend, should be cool.

gringoloco · 12-08-2006, 12:08 AM

Try this one of bskylerj's loud a$$ compressor
http://media.putfile.com/Air-ride87

And here's some of Alvin's on schraders
http://video.google.com/videoplay?do...24296738756458
http://video.google.com/videoplay?do...25243485406861
http://video.google.com/videoplay?do...30452979734497

gringoloco · 12-08-2006, 12:50 AM

Few more I found on google video:

This first guy I think shat himself-
http://video.google.com/videoplay?do...air+bags&hl=en

Really nice Blazer- Looks like it's having alittle trouble picking up the front- Don't know who it belongs to-
http://video.google.com/videoplay?do...air+bags&hl=en

Everyone needs a hobby, I guess-
http://video.google.com/videoplay?do...air+bags&hl=en

leftcoast66 · 12-08-2006, 04:25 AM

Quote:

Originally Posted by gringoloco

Few more I found on google video:

This first guy I think shat himself-
http://video.google.com/videoplay?do...air+bags&hl=en

Really nice Blazer- Looks like it's having alittle trouble picking up the front- Don't know who it belongs to-
http://video.google.com/videoplay?do...air+bags&hl=en

Everyone needs a hobby, I guess-
http://video.google.com/videoplay?do...air+bags&hl=en

That first video is from Totally polished.com. they used to have a huge video archive and that was one of them screwin around. They had some great stuff, too bad they got rid of the archives... Even had the pepsi commercial w/ the truck on hydraulics(They did the work) so was kinda cool as well as a bunch of trucks on bags and just overall crazy crap.

jimmydean · 12-08-2006, 01:21 PM

My truck is so much faster than those videos. I'm not kidding when I say my truck dumps like it's falling off a cliff.

st1x10 · 12-08-2006, 02:12 PM

Jimmy any way you can get a video cause those weren't really "fast" bags? Jimmy can you hop the truck?

jimmydean · 12-08-2006, 02:47 PM

If my tank is full and the truck is dumped, with nobody in the truck I do think the front wheels come up. I wouldn't call it a "hop", but it's fast. It's only if the tank is full though (7 gallons @160psi). Also, my valves are mounted about 3 feet from the bag they control, so the lines are also full.

When the back is done, I would bet you could hop it when it's empty. It scared me enough the first time that I called and ordered the adjusters minutes after.

I am using the Blitzluft valves, if that helps at all. Also, my whole setup from tank to bag is 1/2.

st1x10 · 12-08-2006, 06:59 PM

Another question for you jimmy. What engine do you have? Also do you have a 1 piece or a 2 piece driveshaft? I was looking into the Early Classic Crossmember and it looks sweet, but I am not looking forward to cutting the rivets out. Thanks for all the help. OO One more, where did you get all your fittings?

jimmydean · 12-08-2006, 08:39 PM

I have a mild 350 out of a '75 (that I was told was out of an early Camaro prior to rebuilding). It's a 2 peice drive line and my fittings are mostly Alkon. I have a compression tee fitting on the tank and 2 plastic tee unions. My hose routing is a bit different than others, but it's what worked for me.

I got my swivel 90's for the bags and the straight fittings for the valves off ebay from Koolcads. They shipped them wicked fast and the price was incredible. I got all my brass nipples at Ace Hardware and the rest I got from Suicide Doors.

If I was going to do it over again, I would have gotten everything from Suicide Doors and would have ran 3/8th. The smaller size would be easier to route and would be a lot more managable.

XXL · 12-09-2006, 02:57 PM

Quote:

Originally Posted by jimmydean

I got all my brass nipples at Ace Hardware and the rest I got from Suicide Doors.

hehe... he said 'brass nipples'

1LoC10 · 12-09-2006, 04:11 PM

http://www.youtube.com/watch?v=DzDR3__w_KY
http://www.youtube.com/watch?v=xC-z2PE3e7g

XXL · 12-09-2006, 07:00 PM

Quote:

Originally Posted by 1LoC10

http://www.youtube.com/watch?v=xC-z2PE3e7g

Next time someone's getting harassed by the cops "just because of what he drives" thank the S-10 driver in this link.

st1x10 · 12-09-2006, 07:04 PM

Quote:

Originally Posted by XXL

Next time someone's getting harassed by the cops "just because of what he drives" thank the S-10 driver in this link.

Yea what the heck was he thinking. Thanks this is more along the lines of what I was looking for. Poor video quality, but got some idea of it. Anybody know this guys setup???

camaro__thunder · 12-11-2006, 02:48 AM

That yellow C-10 is my buddy Shannons, it's a cover truck named BAD MEDICINE... Watch the second video Drag It

Here's a video of a truck thats pretty quick that likes to dance.

st1x10 · 12-11-2006, 02:14 PM

Quote:

Originally Posted by camaro__thunder

That yellow C-10 is my buddy Shannons, it's a cover truck named BAD MEDICINE... Watch the second video Drag It

Here's a video of a truck thats pretty quick that likes to dance.

Do you know what the yellow c10 has???

12-07-2006, 05:28 PM	#1
st1x10 Registered User Join Date: Feb 2006 Location: Oklahoma City Posts: 588	Video I am looking for a video of some fast bags on a c10. If anybody has one or has seen one plz post it here. I am thinking about 1/2" valves and would like to know how fast they are. Thanks. __________________ 1970 Chevy C10 "Under Construction" 2002 Chevy S10 V6

12-07-2006, 07:53 PM	#2
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: Video Not exactly what you're looking for, but... (truck belongs to slammed67) __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

12-07-2006, 10:38 PM	#3
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Video I don't have any video, but I can tell you my valves are so fast there is no adjustment when you hit the down switch. It dumps straight to the ground before the can close. I got my dump adjusters to put on this weekend, should be cool.

12-08-2006, 12:08 AM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Video Try this one of bskylerj's loud a$$ compressor http://media.putfile.com/Air-ride87 And here's some of Alvin's on schraders http://video.google.com/videoplay?do...24296738756458 http://video.google.com/videoplay?do...25243485406861 http://video.google.com/videoplay?do...30452979734497 __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-08-2006, 12:50 AM	#5
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Video Few more I found on google video: This first guy I think shat himself- http://video.google.com/videoplay?do...air+bags&hl=en Really nice Blazer- Looks like it's having alittle trouble picking up the front- Don't know who it belongs to- http://video.google.com/videoplay?do...air+bags&hl=en Everyone needs a hobby, I guess- http://video.google.com/videoplay?do...air+bags&hl=en __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-08-2006, 01:21 PM	#7
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Video My truck is so much faster than those videos. I'm not kidding when I say my truck dumps like it's falling off a cliff.

12-08-2006, 02:12 PM	#8
st1x10 Registered User Join Date: Feb 2006 Location: Oklahoma City Posts: 588	Re: Video Jimmy any way you can get a video cause those weren't really "fast" bags? Jimmy can you hop the truck? __________________ 1970 Chevy C10 "Under Construction" 2002 Chevy S10 V6 Last edited by st1x10; 12-08-2006 at 02:15 PM.

12-08-2006, 02:47 PM	#9
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Video If my tank is full and the truck is dumped, with nobody in the truck I do think the front wheels come up. I wouldn't call it a "hop", but it's fast. It's only if the tank is full though (7 gallons @160psi). Also, my valves are mounted about 3 feet from the bag they control, so the lines are also full. When the back is done, I would bet you could hop it when it's empty. It scared me enough the first time that I called and ordered the adjusters minutes after. I am using the Blitzluft valves, if that helps at all. Also, my whole setup from tank to bag is 1/2.

12-08-2006, 06:59 PM	#10
st1x10 Registered User Join Date: Feb 2006 Location: Oklahoma City Posts: 588	Re: Video Another question for you jimmy. What engine do you have? Also do you have a 1 piece or a 2 piece driveshaft? I was looking into the Early Classic Crossmember and it looks sweet, but I am not looking forward to cutting the rivets out. Thanks for all the help. OO One more, where did you get all your fittings? __________________ 1970 Chevy C10 "Under Construction" 2002 Chevy S10 V6

12-08-2006, 08:39 PM	#11
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Video I have a mild 350 out of a '75 (that I was told was out of an early Camaro prior to rebuilding). It's a 2 peice drive line and my fittings are mostly Alkon. I have a compression tee fitting on the tank and 2 plastic tee unions. My hose routing is a bit different than others, but it's what worked for me. I got my swivel 90's for the bags and the straight fittings for the valves off ebay from Koolcads. They shipped them wicked fast and the price was incredible. I got all my brass nipples at Ace Hardware and the rest I got from Suicide Doors. If I was going to do it over again, I would have gotten everything from Suicide Doors and would have ran 3/8th. The smaller size would be easier to route and would be a lot more managable.

12-09-2006, 04:11 PM	#13
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Video http://www.youtube.com/watch?v=DzDR3__w_KY http://www.youtube.com/watch?v=xC-z2PE3e7g __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

12-11-2006, 02:48 AM	#16
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: Video That yellow C-10 is my buddy Shannons, it's a cover truck named BAD MEDICINE... Watch the second video Drag It Here's a video of a truck thats pretty quick that likes to dance. __________________ My Project 69 SWB SHAVED BAGGED DOORED Last edited by camaro__thunder; 12-11-2006 at 02:51 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.