laying frame question

[Shane]

Ya might want to address those sharp edges on those weld beads so close to the bag. That's a puncture looking for a place to happen.

[pharcyde05]

AHHH i understand

and i ment that that i wasent changing the bottom of the lower arm by more than 3/8 in
and buy zing the frame that adds some of the ground clearance back hear is another view



now that makes the lowest part the frame rails

(that rusty pice of metal is just there temp holding the trans up till i get the crossmember in there )

[bskylerj]

Originally Posted by pharcyde05

the z is only 2.5 in had to do some work with crossmembers and frame rails to get rocker down and had to notch for trailing arms
and the bottoms of the lower a arms were droped so the bag would sit down into the arm

Will you have to modify your inner fenders and how much into the bed?

[pharcyde05]

Originally Posted by bskylerj

Will you have to modify your inner fenders and how much into the bed?

yes the inner fenders are removed and the fender has to be trined also depending on tire size it may also require hood hinge relocation
there are differant ways to do bed some just tub and raise what needs to be raised
i raised the entire bed floor and rear fender wells

[Kevin45]

Hey Pharcyde05....you had better get that brake line changed around. It's got quite a bit of strain on it. They don't like to bend 90 degrees too many times.


Kevin