P.S. pump pully? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ron's68 · 11-08-2002, 01:12 AM

Has anyone ever removed the pressed on power steering pump pully? How do you do this? Mine is from an 87 truck with a serpintine pully and I need to put on a V-belt pully. I would like some input before I start putting it on the press. Is the allen head on the end of the shaft something that needs to come off first? Thanks.

Mike C · 11-08-2002, 11:29 AM

You need a PS pump pulley remover. You can get one from Harbor Freight for between $10 and $20 depending on what they have in stock or on sale.

gangforward · 11-08-2002, 05:27 PM

My local Carquest autoparts store had the tool. I just brought in the pump and we yanked the old one off and put the new one on. I forced a $fiver on him as a tip - they were real nice about it.

Good Luck.

Ron's68 · 11-09-2002, 01:05 AM

Thanks for the replies. I'll be trying it this weekend. Hope it works, if not, oh well. A trip to pick&pull is always fun.

Ron's68 · 11-13-2002, 08:00 AM

Just an update. I got a remover/installer kit from Harbor Frieght for $10. It worked great. Easy to remove when I have the right tool.

Thanks again for the info.

11-08-2002, 01:12 AM	#1
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	P.S. pump pully? Has anyone ever removed the pressed on power steering pump pully? How do you do this? Mine is from an 87 truck with a serpintine pully and I need to put on a V-belt pully. I would like some input before I start putting it on the press. Is the allen head on the end of the shaft something that needs to come off first? Thanks. __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

11-08-2002, 11:29 AM	#2
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,734	You need a PS pump pulley remover. You can get one from Harbor Freight for between $10 and $20 depending on what they have in stock or on sale. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

11-09-2002, 01:05 AM	#4
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	Thanks for the replies. I'll be trying it this weekend. Hope it works, if not, oh well. A trip to pick&pull is always fun. __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

11-13-2002, 08:00 AM	#5
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	Just an update. I got a remover/installer kit from Harbor Frieght for $10. It worked great. Easy to remove when I have the right tool. Thanks again for the info. __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-08-2002, 05:27 PM	#3
gangforward Hootis is as Hootis does... Join Date: Nov 2002 Location: Southern Georgia Posts: 500	My local Carquest autoparts store had the tool. I just brought in the pump and we yanked the old one off and put the new one on. I forced a $fiver on him as a tip - they were real nice about it. Good Luck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.