|
02-03-2007, 06:37 PM
|
#1 |
|
Senior Member
Join Date: Nov 2000
Location: WI,USA
Posts: 495
|
Control Arms
Anybody have pics of the difference between 67-70 control arms and 71-72.What are the visual differences?Thanks,Mike
__________________
69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc. |
|
|
|
02-03-2007, 07:53 PM
|
#2 |
|
Senior Member
Join Date: Aug 2006
Location: Minnesota
Posts: 943
|
Re: Control Arms
The upper and lower control arms on the 1/2 tons are the same in the front from 67-72 as far as I know. The ball joints are different though.
|
|
|
|
|
02-03-2007, 07:59 PM
|
#3 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: Control Arms
The steer stops are different on the 67-70 vs 71-72, but its an easy mod with a grinder on the spindles. As mentioned, the balljoints will swap....
 L
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
02-03-2007, 08:53 PM
|
#4 |
|
Senior Member
Join Date: Aug 2006
Location: Minnesota
Posts: 943
|
Re: Control Arms
So what happens when you switch to the front disc kit that changes everything to the disc style spindel. This is what I did. What do the newer steering stops look like?
|
|
|
|
|
02-03-2007, 09:57 PM
|
#5 |
|
Senior Member
Join Date: Aug 2006
Location: Minnesota
Posts: 943
|
Re: Control Arms
Here are some pics of my 70. This also is the disc conversion kit with dropped spindles. Maybe someone has pics of the 71 or 72 so we can compare.
|
|
|
|
|
02-04-2007, 04:09 PM
|
#6 |
|
Senior Member
Join Date: Nov 2000
Location: WI,USA
Posts: 495
|
Re: Control Arms
ttt
__________________
69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc. |
|
|
|
|
02-05-2007, 10:46 PM
|
#7 |
|
Senior Member
Join Date: Nov 2000
Location: WI,USA
Posts: 495
|
Re: Control Arms
Anyone got pics of 71-72 control arms ??Thanks,Mike
__________________
69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc. |
|
|
|
|
02-06-2007, 06:36 PM
|
#8 |
|
Senior Member
Join Date: Nov 2000
Location: WI,USA
Posts: 495
|
Re: Control Arms
ttt
__________________
69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc. |
|
|
|
|
02-07-2007, 05:54 PM
|
#9 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: Control Arms
Sorry, I dont have any pics to help you....my 69 has 71-72 lower arms, but the bump stops, & a good portion of the steer stops are cut off to add clearance on a cut coil setup. To answer the ? on what does it do with the 67-70 lower arms......you dont get the full turning radius , as the stop do not let the wheels turn as far as they should. This is not a big issue, as you can modify either the stops on the spindles, or the arms themselves(whichever you are more comfortable with)......
L
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
