doors and other parts wtb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 11-15-2002, 11:44 PM

i would like to purchase the following parts for my 1976 Chevrolet C10 Longbed truck
please let me know about availability and prices and shipping

left and right doors

good condition bed 8 foot

tailgate

patch panels for the floor both sides and the cab supports

sliding rear window

decent bench seat with armrest and cloth

Im in the NYC area and will pick up anywhere i can drive to
thanks

75stepside · 11-16-2002, 04:15 PM

hello there!

i am in PA, western side and i may have some parts that you are looking for. i have a pair of doors from my '75 chevy. they are aftermarket and are flawless... i stripped them down to the bare metal and they are in primer. i also have a rear slider that i'd be willing to sell... email me and we'll talk more.

check out my website!

**MJN** · 11-16-2002, 07:05 PM

This might be kind of far to go but I've got a '80 GMC c-15 texas cab and doors, A/C, dual tanks, power lock doors, stripped down for paint and decided to get a different cab. Two rust spots, fixable and not noticable. $500

**old Rusty C10** · 11-17-2002, 09:04 PM

thank y ou MJN but you are a bit far for me to travel
The truck im doing is basically a project for my son and i and we wont be making it showroom . If i was doin a showroom kind of truck id definately look into the shipping of your items. Thanks anyway

**old Rusty C10** · 11-19-2002, 08:41 PM

Ive tried emailing you and PMing you but thus far no response . Please let me know prices im very nterested

75stepside · 11-19-2002, 10:06 PM

old Rusty C10

i sent an email to your address... Bobols224@aol.com...???

didn't you get it? if not, email me @ trouper@alleg.edu

zstarkey · 11-22-2002, 12:03 PM

It would be bad for me to ask you this but what do you want for the bed and do you have any pictures of it by chance

75stepside · 12-07-2002, 04:50 PM

...Old Rusy C10 (bob)... where are you!!!?!?!? email me when you can

BIGCHEVYMAN1 · 12-07-2002, 05:28 PM

i have a good drivers side door with no rust but it has 2 small dents, i also have a couple good tail gates and also a rear sliding window. i live near nashville tenn. let me know if your interested.

Txstruck · 12-09-2002, 07:39 PM

Quote:

Originally posted by MJN
This might be kind of far to go but I've got a '80 GMC c-15 texas cab and doors, A/C, dual tanks, power lock doors, stripped down for paint and decided to get a different cab. Two rust spots, fixable and not noticable. $500

Would you part with just the AC?

**Captkaos** · 12-10-2002, 12:54 PM

What all from the A/C do you need Txstruck? I have the A/C stuff I pulled off a '86 C10.

11-15-2002, 11:44 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	doors and other parts wtb i would like to purchase the following parts for my 1976 Chevrolet C10 Longbed truck please let me know about availability and prices and shipping left and right doors good condition bed 8 foot tailgate patch panels for the floor both sides and the cab supports sliding rear window decent bench seat with armrest and cloth Im in the NYC area and will pick up anywhere i can drive to thanks __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-17-2002, 09:04 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	cab parts thank y ou MJN but you are a bit far for me to travel The truck im doing is basically a project for my son and i and we wont be making it showroom . If i was doin a showroom kind of truck id definately look into the shipping of your items. Thanks anyway __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-19-2002, 08:41 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	attn 75 stepside Ive tried emailing you and PMing you but thus far no response . Please let me know prices im very nterested __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-22-2002, 12:03 PM	#7
zstarkey Registered User Join Date: Oct 2002 Location: ZIONSVILLE, INDIANA Posts: 51	BED It would be bad for me to ask you this but what do you want for the bed and do you have any pictures of it by chance

12-07-2002, 05:28 PM	#9
BIGCHEVYMAN1 Registered User Join Date: Sep 2002 Location: portland tennessee Posts: 36	parts i have a good drivers side door with no rust but it has 2 small dents, i also have a couple good tail gates and also a rear sliding window. i live near nashville tenn. let me know if your interested.

11-16-2002, 04:15 PM	#2
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	hello there! i am in PA, western side and i may have some parts that you are looking for. i have a pair of doors from my '75 chevy. they are aftermarket and are flawless... i stripped them down to the bare metal and they are in primer. i also have a rear slider that i'd be willing to sell... email me and we'll talk more. check out my website!

11-16-2002, 07:05 PM	#3
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	This might be kind of far to go but I've got a '80 GMC c-15 texas cab and doors, A/C, dual tanks, power lock doors, stripped down for paint and decided to get a different cab. Two rust spots, fixable and not noticable. $500

11-19-2002, 10:06 PM	#6
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	old Rusty C10 i sent an email to your address... Bobols224@aol.com...??? didn't you get it? if not, email me @ trouper@alleg.edu

12-07-2002, 04:50 PM	#8
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	...Old Rusy C10 (bob)... where are you!!!?!?!? email me when you can

12-10-2002, 12:54 PM	#11
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	What all from the A/C do you need Txstruck? I have the A/C stuff I pulled off a '86 C10. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.