Back-half, Corvette C4 in 69 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 03-02-2007, 01:56 PM

You are truly a pioneer.

RED71CHEVY · 03-02-2007, 02:07 PM

so .............give me a quick price on the front c-4 bolt in , and the rear c4 weld in . also please include a list of what extra items i would need to do this mod., i will not be "laying" frame, just want to have the shock and awe when others see the setup, then want to go for a ride!!!

PBFAB.COM · 03-02-2007, 02:58 PM

Quote:

Originally Posted by jlaird

I'm willing to bet that people who can't weld are willing to compromise looks for the ability to DIY with a bolt in set up.

Probably so, but it won't be offered by me! If it doesn't look right to me... it doesn't get my name on it!

Nate

jimmydean · 03-02-2007, 11:00 PM

Stupid Shockwave question:

Do you not not need shocks with the shockwave? Or do you just not have the mounts built yet?

PBFAB.COM · 03-03-2007, 12:43 AM

Quote:

Originally Posted by RED71CHEVY

so .............give me a quick price on the front c-4 bolt in , and the rear c4 weld in . also please include a list of what extra items i would need to do this mod., i will not be "laying" frame, just want to have the shock and awe when others see the setup, then want to go for a ride!!!

DropmemberC4 Front- $1350 (includes all fabricated pieces that I build, includes trans crossmember, all necessary hardware and rack and pinion notches). Additional items you will need are: C4 Suspension Components (1988-1996), C4 rack and pinion, and Shockwaves (SKW1030). The rear back half does not have a price tag yet.

PBFAB.COM · 03-03-2007, 12:44 AM

Quote:

Originally Posted by jimmydean

Stupid Shockwave question:

Do you not not need shocks with the shockwave? Or do you just not have the mounts built yet?

The Shockwave has an adjustable shock built into it. It is the equivalent of a coil-over, but with a bag in place of a steel spring.

PBFAB.COM · 03-03-2007, 12:54 AM

Some more pics of it aired out.

PBFAB.COM · 03-03-2007, 12:55 AM

A few more...

Bishops Trucks · 03-03-2007, 01:05 AM

That looks great. If you chip out the concrete I'm sure you can get it lower.

FRENCHBLUE72 · 03-03-2007, 01:05 AM

How big are those rear tires??

64shortc10 · 03-03-2007, 01:06 AM

That truck looks so tight! What size wheel and tire is on the rear? Does the front tires measure 29"?

PBFAB.COM · 03-03-2007, 01:15 AM

Quote:

Originally Posted by FRENCHBLUE72

How big are those rear tires??

Rears are 265 35R22... the fronts are 29" tall.

PBFAB.COM · 03-03-2007, 01:17 AM

Quote:

Originally Posted by 64shortc10

That truck looks so tight! What size wheel and tire is on the rear? Does the front tires measure 29"?

He will be running the 265 35s all the way around.

Tony your stuff should be there mid-week. And for the front tire issue you asked me about... there are a few different ways to accomplish what you want... it can be done.

PBFAB.COM · 03-03-2007, 01:18 AM

Quote:

Originally Posted by Bishops Trucks

That looks great. If you chip out the concrete I'm sure you can get it lower.

It will be getting a slight chop and a body drop to put the pinch welds on the ground... then we will have to chip out the concrete!

[ol'Blue] · 03-04-2007, 01:08 PM

lol..now THATS low!

abadsvt · 03-04-2007, 09:28 PM

Nice work Nathan!!!!!! I like your rear setup!

How are you going to run the air lines to the bags? Anything creative? How much lift are you getting with the shockwaves v2 and the IRS? What ratio did you go with? Looks good and keep up the great work!

ps. Have you had a chance to look for the tracking #'s. If you can't find it and i have no idea what happened to them can you please remake them and i will pay for them again. I need them but I'm not in a rush. Thanks Josh

XXL · 05-06-2008, 10:42 PM

..

PBFAB.COM · 05-07-2008, 02:40 AM

Quote:

Originally Posted by XXL

The early days?

turbohacker · 05-12-2008, 08:59 AM

I love your work!

I also dig your awsome trasparent firewall!

AJohn6 · 05-16-2008, 03:49 AM

Nathan,

Great build. I was glad to get to see your work in person. Hopefully we can see more of this one.

By the way, I got a build thread for my truck going. I can't wait to get the rest of the parts.

http://67-72chevytrucks.com/vboard/s...d.php?t=291750

Adam

Bigbore · 01-15-2009, 11:07 PM

Hey Nathan looks good, I will need one of those for my 74! I've got all the parts just need some nice welding!

PBFAB.COM · 01-15-2009, 11:33 PM

Quote:

Originally Posted by Bigbore

Hey Nathan looks good, I will need one of those for my 74! I've got all the parts just need some nice welding!

I can handle the welding part!

XXL · 01-15-2009, 11:36 PM

Quote:

Originally Posted by porterbuilt

I can handle the welding part!

You're just begging for me to post this pic again...

Note: I don't actually know if this is actually one of PBs welds, but I highly doubt it.

draggin86 · 01-16-2009, 01:09 AM

Very nice! I like the rear of the frame.

gringoloco · 01-16-2009, 01:54 PM

Quote:

Originally Posted by Bigbore

Hey Nathan looks good, I will need one of those for my 74! I've got all the parts just need some nice welding!

Me too!

03-02-2007, 01:56 PM	#76
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Back-half, Corvette C4 in 69 You are truly a pioneer.

03-02-2007, 02:07 PM	#77
RED71CHEVY Registered User Join Date: Dec 1999 Location: LEXINGTON,SC,USA Posts: 208	Re: Back-half, Corvette C4 in 69 so .............give me a quick price on the front c-4 bolt in , and the rear c4 weld in . also please include a list of what extra items i would need to do this mod., i will not be "laying" frame, just want to have the shock and awe when others see the setup, then want to go for a ride!!! __________________ TIM '71 CUSTOM C-10 torch red ,350 roller GM crate,3.73 GEARS, REAR 4"DROP SPRING, FRONT 2.5" DROP SPINDLE-1.5"lower spring, FRONT=17x8(4.5bs) W/265-60-17, BACK=17x9.5 (5bs)W/285-60-17, Vintage Air Sure Fit AC------NEVER ENDING PROJECT!!

03-02-2007, 11:00 PM	#79
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Back-half, Corvette C4 in 69 Stupid Shockwave question: Do you not not need shocks with the shockwave? Or do you just not have the mounts built yet? __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

03-03-2007, 12:54 AM	#82
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Back-half, Corvette C4 in 69 Some more pics of it aired out. Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

03-03-2007, 12:55 AM	#83
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Back-half, Corvette C4 in 69 A few more... Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

03-03-2007, 01:05 AM	#84
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: Back-half, Corvette C4 in 69 That looks great. If you chip out the concrete I'm sure you can get it lower. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

03-03-2007, 01:05 AM	#85
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Back-half, Corvette C4 in 69 How big are those rear tires?? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-03-2007, 01:06 AM	#86
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: Back-half, Corvette C4 in 69 That truck looks so tight! What size wheel and tire is on the rear? Does the front tires measure 29"?

03-04-2007, 01:08 PM	#90
[ol'Blue] Registered User Join Date: Jan 2007 Location: West Texas Posts: 158	Re: Back-half, Corvette C4 in 69 lol..now THATS low!

03-04-2007, 09:28 PM	#91
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Back-half, Corvette C4 in 69 Nice work Nathan!!!!!! I like your rear setup! How are you going to run the air lines to the bags? Anything creative? How much lift are you getting with the shockwaves v2 and the IRS? What ratio did you go with? Looks good and keep up the great work! ps. Have you had a chance to look for the tracking #'s. If you can't find it and i have no idea what happened to them can you please remake them and i will pay for them again. I need them but I'm not in a rush. Thanks Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

05-06-2008, 10:42 PM	#92
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: Back-half, Corvette C4 in 69 .. __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter Last edited by XXL; 10-01-2010 at 07:36 PM.

05-12-2008, 08:59 AM	#94
turbohacker PISS POOR Join Date: Dec 2007 Location: visalia, ca Posts: 98	Re: Back-half, Corvette C4 in 69 I love your work! I also dig your awsome trasparent firewall! __________________ Slammed 67 long bed with vette suspention build thread http://67-72chevytrucks.com/vboard/s...d.php?t=291149

05-16-2008, 03:49 AM	#95
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: Back-half, Corvette C4 in 69 Nathan, Great build. I was glad to get to see your work in person. Hopefully we can see more of this one. By the way, I got a build thread for my truck going. I can't wait to get the rest of the parts. http://67-72chevytrucks.com/vboard/s...d.php?t=291750 Adam

01-15-2009, 11:07 PM	#96
Bigbore just stuff and more stuff Join Date: Nov 2008 Location: Roseville, California Posts: 26	Re: Back-half, Corvette C4 in 69 Hey Nathan looks good, I will need one of those for my 74! I've got all the parts just need some nice welding!

01-16-2009, 01:09 AM	#99
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: Back-half, Corvette C4 in 69 Very nice! I like the rear of the frame.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.