'92 Gmc Suburban

[69c10stepside]

I recently pickedup a '92 4x4 1/2 ton suburban. It doesn't have the motor, trans, or xfer case in it. It is short other parts too, but if anybody is looking for something specific let me know. If you would be kind enough to list what your offer is for the part, that would help me out on pricing.

It has the best steering wheels I have seen for one of these models, and I have 8 other trucks around to compare it too.

Just to start:

350 ecm can provide numbers if needed: 50 + shipping
88-94 Tilt steering column automatic (tight tilt controls): 100 + shipping

I have pics of most parts (did miss several pictures here and there) at google.com:
http://picasaweb.google.com/thefrank...mcSuburbanPics

I am going to be in Colorado Springs from Monday 5/7/07 to Thursday 5/10/07. I should be able to respond, but I don't think my wife will want to pull and ship stuff.

[keenee]

How is the rear bumper? How much to zip 15317?

[jeffspower]

I'm interested in the cruise servo, gauge cluster (if it has a tach) & the DRAC module that goes with it, and possibly the front seats & belts. Do either of the front seats tilt forward far enough for access to use in my '88 extended cab?

[69c10stepside]

On the bumper, do you need brackets?

No tach on this one, the seat is like others in xcabs, but I will check how well it works. What is a fair price on the servo?

[keenee]

My bumper is rottten, I think the brackets will be ok. Thanks

[69c10stepside]

Ok, for the bumper I would want 80 + shipping. I will pull it off this next weekend if you still want it, and ill be for sure to check it over real well for any kind of rust issues once I have it pulled.

On that note, the reciever hitch is gone, sold locally. All parts are for sale that you see on the suburban, except for the rearend/frontend. They are 3.73s that are going to be spares for my '95 suburban.

To jeffspower> I did not get a chance to go check the folding mechanism on the passenger seat today. I will check on it as soon as I can. If all is to your liking on it, I would like somewhere around $250 for the seat plus shipping. I figure 25+ the ride for the cruise control module would be good for me.

[jeffspower]

That will be a go on the cruise servo. I hope it's good & not dead like mine. Let me know on the seats. Where are you in NW ARK? I have a friend that gets down that way often.

[69c10stepside]

I can test it on my suburban before i ship it off, that will be no problem. I am about an hour away from Fayetteville to the west, thirty minutes from Harrison to the east. I frequent Branson and Springfield Mo also.. As a matter of fact i am flying out of Springfiled in about two and a half hours from now

[keenee]

Would you have any idea how much to ship the bumper? Any one ?

[69c10stepside]

Hopefully i can get some kind of weight/measurements friday/saturday to get some kind of estimate of shipping for you.

Other then the front seats, if there is no other interest in interior parts by Friday, i am going to be taking some of those parts to ebay.

[bcminimart]

need right side mirror outside,ship to 35125,if cheap enough i would take both mirrors, thanx bob

[bcminimart]

need the dash, mine cracked above glove box,headlights and parking lights too

[69c10stepside]

Bob, these are power mirrors, i would like to sell them as a set, I would want $50 + the ride for them, thanks

[69c10stepside]

Originally Posted by bcminimart

need the dash, mine cracked above glove box,headlights and parking lights too

Would you need just the base dash plastic and not the harness etc? I am not for sure if anything pre - 91 on the harness side will fit correctly for like the instrument cluster plugin etc.

Are you wanting the headlights and the turnsignal lenses? The headlight lenses are a little foggy, are you going to need the harness for them also?

[jeffspower]

I'll see what my friend at work says tomorrow about picking up the seats. I think he goes down to the Harrison area regularly.

[69c10stepside]

Sounds good, let me know how that works out.. If he can provide the freight, that for sure makes things easier

[bagged91]

I could use the drivers side door panel with the switches & also the complete uncut power window/lock harness from front to back, unplugged from the doors & the convienence center...


Shipped to NJ 08071...

Have 67-72 parts as possible trade...

Thanks. Joe.

[ms. Attitude]

hi.I could use both front tow hooks & air deflecter and the glove box door if theyre all in good shape to 18853.dont happen to have a good set of oem fender flares do you?thanks.

[69c10stepside]

I would really like to keep the door panels together if at all possible, what kind of value are you putting on these parts? I haven't tore a suburban down to the point of pulling out the harness like you are asking before, might be a bit of a learning curve on some of that

What kind of parts do you have that you would want to trade?

Originally Posted by bagged91

I could use the drivers side door panel with the switches & also the complete uncut power window/lock harness from front to back, unplugged from the doors & the convienence center...


Shipped to NJ 08071...

Have 67-72 parts as possible trade...

Thanks. Joe.

[69c10stepside]

Originally Posted by ms. Attitude

hi.I could use both front tow hooks & air deflecter and the glove box door if theyre all in good shape to 18853.dont happen to have a good set of oem fender flares do you?thanks.

Tow hooks I can do lets talk price on those for it can be fair, the front air deflector is gone, just didn't note that from the begining.

The glove box door is not broke, but i will have to check it again. it has either scratches or something on it the best i can remember.

I think i have two rear fender flares, but I know for sure i do not have a complete set.

[ms. Attitude]

hi. the air deflecter im talking about is the one under the bumper,not the one on the hood.(just in case there was a misunderstanding)gimme a fair price on the deflecter(if that one is there)the glove box door,tow hooks and rear flares.thanks.

[69c10stepside]

Yeah that is the one I am talking about. I will have to search for the rear flares, I have recenetly seen them i believe. I know that they are the burgandy type color, came off of a 90/91 model truck. I plan on taking off half a day tomorrow from work, and i can search when i get home, or saturday one for those flares.

Pricing parts with out the deflector obviously and the flares, $25 + shipping. I will post here as soon as i know about the other.

Originally Posted by ms. Attitude

hi. the air deflecter im talking about is the one under the bumper,not the one on the hood.(just in case there was a misunderstanding)gimme a fair price on the deflecter(if that one is there)the glove box door,tow hooks and rear flares.thanks.

[ms. Attitude]

ok.great.thanks.i'll take 'em.let me know about the flares and ill send you the $$.thanks again.

[69c10stepside]

Will be checking for the flares today.

[69c10stepside]

Flares are not in any condition worth selling ms. attitude, sorry about that!