factory gauges & circits f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 11-17-2007, 03:08 PM

speedomters $10.00 each plus ride .everything in this tread is untested but they look perty good.

billsbowtie · 11-17-2007, 03:09 PM

fuel gauges $10.00 each.

billsbowtie · 11-17-2007, 03:10 PM

c-10 oil pressure gauges $10.00 each.

billsbowtie · 11-17-2007, 03:12 PM

battery charging gauges $5.00 each.

billsbowtie · 11-17-2007, 03:12 PM

temp gauges $5.00 each.

billsbowtie · 11-17-2007, 03:14 PM

2 gauge type and non gauge type circits $30.00 shipped for all 4 .

jorgensensc · 11-17-2007, 04:42 PM

Could I entice you to sell me one of the gauge circuit cards for 10.00 shipped. That is what I need right now. I'm running around with no cluster right now because I went to clean up mine and my circuit card disintegrated. SO I couldn't finish putting it back together. I also need a nice Gauge cluster Housing, black and silver/chrome that does not have the choke switch. Let me know.
Shawn

billsbowtie · 11-17-2007, 07:06 PM

shawn i will check on the cluster and get back with you in a little bit.

billsbowtie · 11-17-2007, 07:32 PM

shawn you can add one of the 2 upper clusters for $10.00 plus $8.00 shipping. or i can send you the circit for $10.00.

billsbowtie · 11-17-2007, 07:38 PM

i also have these whole bezels f/s the gauge type are $30.00 plus $15.00 shipping. and the non gauge type are $20.00 plus $15.00 shipping.

Sadsack · 11-17-2007, 08:10 PM

Have a closeup pic of the woodgrain one? I might be interested

billsbowtie · 11-17-2007, 08:21 PM

i will try to get one tomarrow of it.

70c10 · 11-17-2007, 09:27 PM

Bill- is there any broken circuits on the full gauge printed circuit?. Can I get the same deal as Shawn?. If so, PM the payment info. Thanks

jorgensensc · 11-17-2007, 09:41 PM

Bill,
Thank you for the pics. I think I will just stay with the circuit for now. I think I will have to get a new bezel (I'm too picky). They used to be 25.00, but I think they are much more now! Thank you again for the pics. Can I send you Paypal?
Shawn
PM sent, looking for more stuff to send with this.

billsbowtie · 11-18-2007, 11:51 AM

pm sent jim.

70c10 · 11-18-2007, 12:43 PM

Didn't get PM yet.

billsbowtie · 11-18-2007, 12:45 PM

here you go sadsack.

billsbowtie · 11-18-2007, 12:45 PM

billsbowtie · 11-18-2007, 12:50 PM

70c10 here is the other gauge circit i high lighted the only place that i wasn't sure about. let me know what you think.

70c10 · 11-18-2007, 01:52 PM

Thanks for the close up pic Bill. If it's questionable, I think I will pass on it but thanks again.

**jamie72** · 11-18-2007, 07:19 PM

bill got any inner tins??

billsbowtie · 11-18-2007, 11:34 PM

jamie how many do you need gauge or non gauge type?

billsbowtie · 11-18-2007, 11:35 PM

70c10 you're welcome if i take anymore apart i will keep you in mind on a circit.

josu_ito · 11-21-2007, 12:18 AM

Hello Billsbowtie, I would like to buy one temp gauge, this is my first time buying here, I don't know what's next, I'll pay via Paypal or other payment methods, ship to 92706....

Please advise...

billsbowtie · 11-21-2007, 06:14 PM

shawn i mail your parts snail mail today.
jamie pm sent.
josu pm sent.

11-17-2007, 03:08 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	factory gauges & circits f/s speedomters $10.00 each plus ride .everything in this tread is untested but they look perty good. __________________ i have 67/72 chevy truck parts f/s.

11-17-2007, 03:09 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s fuel gauges $10.00 each. __________________ i have 67/72 chevy truck parts f/s.

11-17-2007, 03:10 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s c-10 oil pressure gauges $10.00 each. __________________ i have 67/72 chevy truck parts f/s.

11-17-2007, 03:12 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s battery charging gauges $5.00 each. __________________ i have 67/72 chevy truck parts f/s.

11-17-2007, 03:12 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s temp gauges $5.00 each. __________________ i have 67/72 chevy truck parts f/s.

11-17-2007, 03:14 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s 2 gauge type and non gauge type circits $30.00 shipped for all 4 . __________________ i have 67/72 chevy truck parts f/s.

11-17-2007, 04:42 PM	#7
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: factory gauges & circits f/s Could I entice you to sell me one of the gauge circuit cards for 10.00 shipped. That is what I need right now. I'm running around with no cluster right now because I went to clean up mine and my circuit card disintegrated. SO I couldn't finish putting it back together. I also need a nice Gauge cluster Housing, black and silver/chrome that does not have the choke switch. Let me know. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

11-17-2007, 07:06 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s shawn i will check on the cluster and get back with you in a little bit. __________________ i have 67/72 chevy truck parts f/s.

11-17-2007, 07:32 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s shawn you can add one of the 2 upper clusters for $10.00 plus $8.00 shipping. or i can send you the circit for $10.00. __________________ i have 67/72 chevy truck parts f/s.

11-17-2007, 07:38 PM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s i also have these whole bezels f/s the gauge type are $30.00 plus $15.00 shipping. and the non gauge type are $20.00 plus $15.00 shipping. __________________ i have 67/72 chevy truck parts f/s.

11-17-2007, 08:10 PM	#11
Sadsack Registered User Join Date: May 2007 Location: East TN Posts: 171	Re: factory gauges & circits f/s Have a closeup pic of the woodgrain one? I might be interested

11-17-2007, 08:21 PM	#12
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s i will try to get one tomarrow of it. __________________ i have 67/72 chevy truck parts f/s.

11-17-2007, 09:27 PM	#13
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: factory gauges & circits f/s Bill- is there any broken circuits on the full gauge printed circuit?. Can I get the same deal as Shawn?. If so, PM the payment info. Thanks __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-17-2007, 09:41 PM	#14
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: factory gauges & circits f/s Bill, Thank you for the pics. I think I will just stay with the circuit for now. I think I will have to get a new bezel (I'm too picky). They used to be 25.00, but I think they are much more now! Thank you again for the pics. Can I send you Paypal? Shawn PM sent, looking for more stuff to send with this. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE Last edited by jorgensensc; 11-17-2007 at 11:41 PM.

11-18-2007, 11:51 AM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s pm sent jim. __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

11-18-2007, 12:43 PM	#16
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: factory gauges & circits f/s Didn't get PM yet. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-18-2007, 12:45 PM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s here you go sadsack. __________________ i have 67/72 chevy truck parts f/s.

11-18-2007, 12:45 PM	#18
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s __________________ i have 67/72 chevy truck parts f/s.

11-18-2007, 12:50 PM	#19
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s 70c10 here is the other gauge circit i high lighted the only place that i wasn't sure about. let me know what you think. __________________ i have 67/72 chevy truck parts f/s.

11-18-2007, 01:52 PM	#20
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: factory gauges & circits f/s Thanks for the close up pic Bill. If it's questionable, I think I will pass on it but thanks again. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-18-2007, 07:19 PM	#21
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: factory gauges & circits f/s bill got any inner tins?? __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

11-18-2007, 11:34 PM	#22
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s jamie how many do you need gauge or non gauge type? __________________ i have 67/72 chevy truck parts f/s.

11-18-2007, 11:35 PM	#23
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s 70c10 you're welcome if i take anymore apart i will keep you in mind on a circit. __________________ i have 67/72 chevy truck parts f/s.

11-21-2007, 12:18 AM	#24
josu_ito Registered User Join Date: Oct 2007 Location: ANAHEIM, CA Posts: 21	Re: factory gauges & circits f/s Hello Billsbowtie, I would like to buy one temp gauge, this is my first time buying here, I don't know what's next, I'll pay via Paypal or other payment methods, ship to 92706.... Please advise...

11-21-2007, 06:14 PM	#25
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: factory gauges & circits f/s shawn i mail your parts snail mail today. jamie pm sent. josu pm sent. __________________ i have 67/72 chevy truck parts f/s.

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode