Durabrand - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70' GMC · 11-26-2007, 02:48 PM

http://dbproducts.net/db410.html

I was hoping some of you could tell me would I have to cut the dash and does anybody here have a cassette deck like this? or if yall have any good info on this. the only reason why I bought was cause it was 30 bucks at walmart and it has knobs.

70' GMC · 11-26-2007, 03:00 PM

ttt

jcueckert13 · 11-26-2007, 04:17 PM

my subaru had the same one, i think the bezel around the knobs comes off so you shouldent need to cut the dash, the one i had wen in the trash long ago so i cant be completly sure

70' GMC · 11-26-2007, 09:38 PM

Quote:

Originally Posted by jcueckert13

my subaru had the same one, i think the bezel around the knobs comes off so you shouldent need to cut the dash, the one i had wen in the trash long ago so i cant be completly sure

got any pics? or any other info

**special-K** · 11-27-2007, 11:45 AM

I know there are zillions of in-dash cassette players that`ll slip right in,since they used to be standardized.I have an Olds AM in my`Sierra.Looks factory.I have an Alpine for my next resto.

jcueckert13 · 11-27-2007, 12:14 PM

ok i actually found the radio so here are some pics and insructions. the radio does fit without cutting.
first remove the 2 screws that are where the circled holes are and pull off the radio knobs and the nuts behind the knobs.

then remove the face plate and the brackets and run the lower nuts down the shafts so that the face plate can hold the radio to the dash.

put the radio in the dash

put the face plate back on the radio

tighten down the nuts over the face plate

reinstall the knobs

70' GMC · 11-27-2007, 09:32 PM

thanks a lot and you ought to make it a faq or something. my dash is black so it will blend perfectly so is it going to be in your truck

so did I do good for $32.03. It looks better than the factory ones dont it?

Im glad I don't have to cut the dash up.

70' GMC · 11-27-2007, 09:34 PM

Quote:

Originally Posted by special-K

I know there are zillions of in-dash cassette players that`ll slip right in,since they used to be standardized.I have an Olds AM in my`Sierra.Looks factory.I have an Alpine for my next resto.

what does the alpine look like?

Mr79C10 · 11-28-2007, 05:22 AM

OMG are those,,,,, twisty knobs?

jcueckert13 · 11-28-2007, 09:45 AM

Quote:

Originally Posted by 70' GMC

thanks a lot and you ought to make it a faq or something. my dash is black so it will blend perfectly so is it going to be in your truck

so did I do good for $32.03. It looks better than the factory ones dont it?

Im glad I don't have to cut the dash up.

i doubt i am going to use this radio in my truck, i got a radio delete plate a couple years ago an will probably put a radio in the glove box. of course all of ths is a ways off since i need a motor, do a frame swap and do a fair bit of body work. 32 bucks is pretty good for this radio, i didnt get much use out of it because the subaru it came with has yet to see the road because i am rebuilding the motor before getting it on the road.

70' GMC · 11-28-2007, 03:24 PM

Quote:

Originally Posted by Mr79C10

OMG are those,,,,, twisty knobs?

whats wrong with the twisty knobs

11-26-2007, 02:48 PM	#1
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Durabrand http://dbproducts.net/db410.html I was hoping some of you could tell me would I have to cut the dash and does anybody here have a cassette deck like this? or if yall have any good info on this. the only reason why I bought was cause it was 30 bucks at walmart and it has knobs. __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

11-26-2007, 03:00 PM	#2
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: Durabrand ttt __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

11-26-2007, 04:17 PM	#3
jcueckert13 Registered User Join Date: Apr 2003 Location: Edgewood New Mexico Posts: 2,088	Re: Durabrand my subaru had the same one, i think the bezel around the knobs comes off so you shouldent need to cut the dash, the one i had wen in the trash long ago so i cant be completly sure __________________ 1990 subaru legcy (daily driver) 1987 Toyota 4runner (weekend toy) 1968 C30 flatbed dually 1970 C10 longbed stepside (in pieces) 1976 Dodge Dart 1963 Dodge Dart

11-27-2007, 11:45 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Durabrand I know there are zillions of in-dash cassette players that`ll slip right in,since they used to be standardized.I have an Olds AM in my`Sierra.Looks factory.I have an Alpine for my next resto. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-27-2007, 12:14 PM	#6
jcueckert13 Registered User Join Date: Apr 2003 Location: Edgewood New Mexico Posts: 2,088	Re: Durabrand ok i actually found the radio so here are some pics and insructions. the radio does fit without cutting. first remove the 2 screws that are where the circled holes are and pull off the radio knobs and the nuts behind the knobs. then remove the face plate and the brackets and run the lower nuts down the shafts so that the face plate can hold the radio to the dash. put the radio in the dash put the face plate back on the radio tighten down the nuts over the face plate reinstall the knobs __________________ 1990 subaru legcy (daily driver) 1987 Toyota 4runner (weekend toy) 1968 C30 flatbed dually 1970 C10 longbed stepside (in pieces) 1976 Dodge Dart 1963 Dodge Dart

11-27-2007, 09:32 PM	#7
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: Durabrand thanks a lot and you ought to make it a faq or something. my dash is black so it will blend perfectly so is it going to be in your truck so did I do good for $32.03. It looks better than the factory ones dont it? Im glad I don't have to cut the dash up. __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

11-28-2007, 05:22 AM	#9
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: Durabrand OMG are those,,,,, twisty knobs? __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.