|
12-05-2007, 08:04 AM
|
#276 |
|
Senior Member
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
Started to put the front of the motor back together. Knocked the tube out of the drivers side manifold, drilled and tapped for plug(11/32" drill, 1/8"-27 nfpt tap). BTW, I didn't tap it with the manifold on the engine
I have to rotate 1/2 of the alternater housing to get the plugs for the wiring to align to the outside and build another 'L' bracket to clear the fan blade. Getting ready to start on the drivers side exhaust pipe, then it's time to hang the core support to get the radiator and battery in it...also want to prime and spin the oil pump to see how things work Finally got the pass. side door to line up better, just alittle more tweeking once the fenders are on. Thanks Rockrln, for mentioning that in another thread   
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 12-05-2007 at 08:25 AM. |
|
|
|
12-05-2007, 09:35 AM
|
#278 | |
|
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
Quote:
 Thanks, sure is fun to play in my heated workshop with the snow falling outside
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
|
|
|
|
|
12-09-2007, 11:47 AM
|
#279 |
|
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
Started to work on the rad. support, found out it was hit on the right front. So a little hammer and dolly work got some of it out, where the lines are in the pic needs more, but it is right behind an uprite brace. Some creativity involved... Lower area pushed back about about 2". Of course the lower battery area needs to be replaced...
Got the power steering hooked up, and finally got the correct clamps from NAPA (SS #33226) Exhaust seems tight, may have to delete intermediate bracket, I'll decide after I get the CC hooked up to a clamp. Here's some pics    
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
|
|
|
|
12-13-2007, 02:29 PM
|
#280 |
|
Can't wait to retire!!
Join Date: Feb 2003
Location: Corunna, MI
Posts: 1,575
|
Re: PO has me PO'd
Looking good J.
__________________
 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 |
|
|
|
|
12-13-2007, 02:53 PM
|
#281 |
|
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
Thank you, just got a dbl row pulley for the PS, so I can play with that.
We just had a sickness, death in the family, funeral was today so I haven't had much chance to work on it. How's that Mich. weather treating you? Bin pretty mild around here... J
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
|
|
|
|
12-13-2007, 03:09 PM
|
#282 |
|
Can't wait to retire!!
Join Date: Feb 2003
Location: Corunna, MI
Posts: 1,575
|
Re: PO has me PO'd
Sorry to hear about your family.
The weather here is less than desirable...or...it sucks! On a good note I went to Harbor Freight and picked up a media blast cabinet and 4 vehicle dollies today. Maybe this will give me some motivation o get something done.
__________________
2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 |
|
|
|
|
12-13-2007, 03:24 PM
|
#283 |
|
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
Thanks.
You will be amazed how helpful the cabinet is to clean parts, that was my third tool to buy along time ago. My cabinet is about 4' and I would not have it any other way, but my compressor is down rite now, and have to rebuild it. The dollies are useful to, since I have a small shop. My Harbor Frt. is about 15 min. from me. Great place to look around. They had a new compressor for 90 bucks and I should have bought instead of buying parts to rebuild mine. Oh well hindsight, 20/20!!! Soooooo, you may be getting started? Good time of the year, nothing happening.... good luck and post pics Hey I was talking to Dave's Amnesia the other day, he's headed my way in the spring. He wants mine dun
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
|
|
|
|
12-13-2007, 04:34 PM
|
#284 |
|
Can't wait to retire!!
Join Date: Feb 2003
Location: Corunna, MI
Posts: 1,575
|
Re: PO has me PO'd
Looks like you are coming right along on the Jimmy. I hope to make some good progress between now and christmas, I will post pics for sure.
Good luck with your compressor. Isn't Dave from your way originally? Nice guy. I've got to get over to his place soon. The Jimmy should be done by spring...won't it? Things seem to be rolling along nicely. Good luck.
__________________
2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 |
|
|
|
|
12-14-2007, 01:12 AM
|
#285 |
|
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
Yeah, he's from York, Pa. He said his Dad is tired of seeing pics. and wants to see the real thing
I'm shooting for spring....
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
|
|
|
|
12-14-2007, 11:57 AM
|
#286 |
|
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
Well Gentlemen I just spent 4 hours at Tri Pro. What an experience, shelf upon shelf, rack upon rack, warehouse upon warehouse, of every piece you need to build your truck. Nice stuff, I don't want to hear any more complaints about the product, it is top shelf or GM wouldn't give them the license to put their name on it....
Every piece I picked up had the wt. of a good quality stamping, no waves, and tight bends. All in all, a piece that should be on all our trucks. You could build you truck from this place. When I saw the torsion boxes, I was sold. Talk about some beef, these things won't rust thru for another 40 years, I was going to build my own. Why should I? The time I spend on them is not worth it. The price is that good...if you want to save money, I suggest you save it elsewhere. The '67 grilles are awsome, the tailgates are awesome, the firewalls are awesome. Wait till you see the new headlites he is getting ready to offer, really nice system. Jon said the name, but I forget already(CRAFT) Rant off
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 12-14-2007 at 12:14 PM. |
|
|
|
|
12-15-2007, 01:49 AM
|
#287 | |
|
Can't wait to retire!!
Join Date: Feb 2003
Location: Corunna, MI
Posts: 1,575
|
Re: PO has me PO'd
Quote:
Did you pick anything up for the Jimmy? How far of a drive is it for you?
__________________
2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 |
|
|
|
|
|
12-15-2007, 02:21 AM
|
#288 |
|
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
1 hour ride up the Jersey turnpike. I will be buying rad. support and torsion boxes. He had the pc. that goes behind the rockers, didn't know it was available. Would have saved me a ton of fab. work!! Between the 'a' and 'b' post.
He invited me up to see his pick up truck project, it was just a look see at what he had. The wifey said don't take any money
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
|
|
|
|
12-15-2007, 03:04 AM
|
#289 | |
|
Can't wait to retire!!
Join Date: Feb 2003
Location: Corunna, MI
Posts: 1,575
|
Re: PO has me PO'd
Quote:
__________________
2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 |
|
|
|
|
|
12-15-2007, 03:07 AM
|
#290 | |
|
Registered User
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,537
|
Re: PO has me PO'd
Quote:
|
|
|
|
|
|
12-15-2007, 03:51 AM
|
#291 |
|
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
My 'war' has bin going on for 35 years and she holds the high ground
Her answer to my spending is that I have to have a job, go figure Hey Chevyman, I bet VT beats both of us on his build. Never met a man with more determination and drive...I'll spend all day trying to get my intake back on and he'll rebuild a motor in the same amount of time
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 12-15-2007 at 03:59 AM. |
|
|
|
|
12-15-2007, 12:37 PM
|
#292 | |
|
Registered User
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,537
|
Re: PO has me PO'd
Quote:
We'll see how thing's go. If we wanna drive the old trucks to Mich. this summer I've got WAY lots to do. Get this one, I'm considering doing a 6.2 diesel in this one now.  Did get some body work done on the swb though. |
|
|
|
|
|
12-15-2007, 01:05 PM
|
#293 |
|
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
That's a nice idea with the diesel, you could make your own for .70 a gallon
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
|
|
|
|
12-15-2007, 01:27 PM
|
#294 | |
|
Can't wait to retire!!
Join Date: Feb 2003
Location: Corunna, MI
Posts: 1,575
|
Re: PO has me PO'd
Quote:
__________________
2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 |
|
|
|
|
|
12-15-2007, 01:34 PM
|
#295 | |
|
Registered User
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,537
|
Re: PO has me PO'd
Quote:
|
|
|
|
|
|
12-15-2007, 01:46 PM
|
#296 | |
|
Can't wait to retire!!
Join Date: Feb 2003
Location: Corunna, MI
Posts: 1,575
|
Re: PO has me PO'd
Quote:
__________________
2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 |
|
|
|
|
|
12-15-2007, 01:47 PM
|
#297 | |
|
Registered User
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,537
|
Re: PO has me PO'd
Quote:
|
|
|
|
|
|
12-15-2007, 02:33 PM
|
#298 | |
|
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
Quote:
Definately sounds like a cool trip, wonder how far it is? Gotta look it upWonder if we could pick up some other people along the way??
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 12-15-2007 at 02:38 PM. |
|
|
|
|
|
12-15-2007, 02:40 PM
|
#299 | |
|
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,764
|
Re: PO has me PO'd
Quote:
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
|
|
|
|
|
12-16-2007, 01:37 AM
|
#300 | |
|
Can't wait to retire!!
Join Date: Feb 2003
Location: Corunna, MI
Posts: 1,575
|
Re: PO has me PO'd
Quote:
I guess I need to get my a$$ in gear on mine.
__________________
2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 |
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
