Fuel pump question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tim64 · 01-10-2008, 01:48 AM

Hey All,
Does anyone know if there is any difference between a fuel pump for a 230ci and a 250ci? If you look at some auto parts store's web site they give different part numbers, but I would just like to know if they are interchangeable. Mine went out yesterday, and I have one I bought for a 63’ 230ci some time back, but never used. My truck has a 75’ 250ci in it.
Thanks for the help,
Tim

60-66 Nut · 01-10-2008, 03:22 AM

Tim, there may be some minor differences between years like the angle of the fittings and such, but it should bolt up to the engine all the same.

60-66 Nut

Tim64 · 01-10-2008, 07:39 AM

Well, I put the one I had and got it running. It looked just like the one I took off. Does someone make one that is better quality than the cheap ones you get from the discount house part stores?
I'm sure that's where the one I had came from, and the one I took off really didn't look very old at all.
Thanks,
Tim

04Xrider · 01-10-2008, 08:03 AM

The only difference between a 230 and 250 is stroke. I would go with any new, good name brand pump.

fuelpump · 01-10-2008, 12:58 PM

Quote:

Originally Posted by 04Xrider

I would go with any new, good name brand pump.

Airtex makes good mechanical pumps. You can find them boxed as Master brand as well.
Trust me I'm a trained professional

01-10-2008, 01:48 AM	#1
Tim64 Registered User Join Date: Aug 2007 Location: Vandalia, Ohio Posts: 396	Fuel pump question Hey All, Does anyone know if there is any difference between a fuel pump for a 230ci and a 250ci? If you look at some auto parts store's web site they give different part numbers, but I would just like to know if they are interchangeable. Mine went out yesterday, and I have one I bought for a 63’ 230ci some time back, but never used. My truck has a 75’ 250ci in it. Thanks for the help, Tim

01-10-2008, 03:22 AM	#2
60-66 Nut Professional Beer Tester Join Date: Aug 2004 Location: Louisiana Posts: 453	Re: Fuel pump question Tim, there may be some minor differences between years like the angle of the fittings and such, but it should bolt up to the engine all the same. 60-66 Nut __________________ 60 Ford F100 Custom Cab 61 Apache Short Fleetside 64 C10 Short Stepside 65 C80 409 V8 5spd(X-Firetruck) 83 GMC 350 Olds Diesel 85 GMC Short Bed 86 GMC Short Bed 90 GMC R3500 Crew Cab 92 GMC 1500

01-10-2008, 07:39 AM	#3
Tim64 Registered User Join Date: Aug 2007 Location: Vandalia, Ohio Posts: 396	Re: Fuel pump question Well, I put the one I had and got it running. It looked just like the one I took off. Does someone make one that is better quality than the cheap ones you get from the discount house part stores? I'm sure that's where the one I had came from, and the one I took off really didn't look very old at all. Thanks, Tim

01-10-2008, 08:03 AM	#4
04Xrider Registered thread killer Join Date: Nov 2006 Location: Cookson, OK. Posts: 349	Re: Fuel pump question The only difference between a 230 and 250 is stroke. I would go with any new, good name brand pump. __________________ !966 stepside, 350 SB, ZZ-4 roller, Crane roller rockers, 0.030 flat tops, airgap intake, 750 Holley, stainless steel headers, edelbrock SDT mufflers, Mark 8 elec fan, 700R-4, column shift

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.