Parts For Sale

[Wild83C10]

I have the following parts for sale. All engine parts are used and for a Small Block Chevy.
1. Trick Flow heads-SOLD

2. '74 350 2-bolt long block. It needs a rebuild. Best Offer I can help with delivery if within a reasonable distance, just pay for gas.

3. '74 355 4-bolt short block assembly. Original 4-bolt block, cast crank and rods, forged pistons. Will include all new bearings. Needs to be assembled. I can help with delivery if within a reasonable distance, just pay for gas.
Machine Shop work:
cleaned
honed
new cam bearings
polished crank
new bearings
new rings
$750 or BO

4. Comp Cams Hydraulic Flat Tappet Cam w/ lifters and springs. Springs are matched to the cam. P/N for the cam is 12-254-3.
Specs: .519 intake lift, .523 exhaust lift, 294 intake duration, 306 exhaust duration at tappet lift. 250, 256 at .050 lift. 110 lobe separation. I have original box and cam card.
$275 or BO, plus shipping

5. Cammotion Hydraulic Roller Cam w/springs, NO lifters. Custom ground cam, Grind Number: X2371-24410-10.
Specs: .580 intake lift, .592 exhaust lift (w/1.6 rockers), 239 intake duration, 247 exhaust duration @ .050 lift. 110 lobe separation. I have original box and cam card.
$275 or BO, Plus shipping

6. Summit 2" Drop Springs. SOLD

7. Hedman Headers. Long Tube Headers for 73-86 Chevy C10 w/SBC. They are in good condition, with black header paint. I painted them before I used them and baked the paint on. The paint looks ok and it has kept the headers in good condition. They have a 3" Flowmaster ball flange collector on the end. The ball flange doesn't require a gasket and works great. I also have an O2 bung in each header (running aftermarket EFI). They are 1-5/8" primaries, no dents or dings. HEDMAN P/N 69090
$60 or BO

Please ask any questions. I will make a better deal if you buy multiple items.

Thanks, Joe

[rich-white]

How old are the headers? Do you have pics? I need a set for a 77 4x4.

[rich-white]

How old are the Headman Headers and are they in great,really good,good, fair, or crappy condition? Will they fit a 77 3/4 ton 4x4?

[Nomad88]

Could you send me pics and information on the 2" Drop Springs

[Wild83C10]

The headers are probably 10 years old. They are in good condition. I am selling them because I need 1-3/4 primary headers for my new motor. I can't tell you whether or not they would fit a 4x4 truck. You would have to ask around.

[Wild83C10]

The machine shop has completed the short block parts. I will attempt to pick it up tomorrow. Anyone interested? All new bearing, new molly rings, cleaned, honed, checked. It would be a fresh motor. Make over 400hp with the decent heads and cam, it will be reliable and well mannered.

[Wild83C10]

Heads are listed on ebay now:
http://cgi.ebay.com/ebaymotors/ws/eB...MESE:IT&ih=019

[benoit454]

still got the headers? how much do you think it cost to sdhip to logan wv 25601 and can the o2 holes be plugged up without welding?

[benoit454]

forgot to ask for pics if the headers if ya got em?

[RWJJR]

How long were the springs usede for?

[Wild83C10]

I installed the springs in the summer of 2006 and I only drove the truck a couple of times a month during the warmer months.

[Wild83C10]

Springs are Sold.

Lowered the price on the headers.