Progress - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62 short step · 02-15-2008, 10:26 AM

Quote:

Originally Posted by protrash64

........Ive used the hammertone paint also and its really tough stuff. Not like standard rattle crap. I see it better in the pic w/ the engine. I used it on my headlite buckets, rear end cover. and some brackets for seats. When some parts didnt want cooperate I was a little rough on them and the paint hung in there.

I know what you mean, its tough!! I also used it on the floor boards before I put the sound deadner on.

62 short step · 03-14-2008, 03:41 AM

Some pics of new sheet metal on front!! No more rust!!

jonzcustomshop · 03-14-2008, 12:01 PM

so is that all repro stuff? how did it fit?
Repro inners as well?
I am thinking about going the repro route...

283 Man · 03-14-2008, 12:47 PM

Looks real good

you have come long way on the 61 looks like your helper enjoying too

,

62 short step · 03-14-2008, 04:06 PM

Quote:

Originally Posted by jonzcustomshop

so is that all repro stuff? how did it fit?
Repro inners as well?
I am thinking about going the repro route...

Yep all repro. I had to take a little time to fit it, but overall it wasn't that bad. A little extra time fitting repro was better for me than fixing all the rust on mine.

62 short step · 03-14-2008, 04:07 PM

Quote:

Originally Posted by 283 Man

Looks real good

you have come long way on the 61 looks like your helper enjoying too

,

Thanks Morton!! Yea, he likes to help also!! Future hot rodder!!

hewlett2002000 · 03-14-2008, 04:20 PM

that looks great!!! always had a soft spot for 4x4. alot of people dont like that hood but i sure do. been looking for one for my truck. anyways it looks great.
John

Stepside65 · 03-14-2008, 05:19 PM

Commin along quite nicely. Any ideas on the paint color yet?

Joey~AP · 03-14-2008, 05:55 PM

Sweet truck!

62 short step · 03-14-2008, 09:45 PM

Quote:

Originally Posted by Stepside65

Commin along quite nicely. Any ideas on the paint color yet?

Thanks, I'm thinking about a 2 tone. White on the bottom and about the same blue thats on it now on top. Just like the they were in 61.

62 short step · 03-14-2008, 09:47 PM

Quote:

Originally Posted by hewlett2002000

that looks great!!! always had a soft spot for 4x4. alot of people dont like that hood but i sure do. been looking for one for my truck. anyways it looks great.
John

Thanks, I have an extra hood. But I'm about to cut patch panels out of it for the hood on my truck. The other hood is not all that great, but where I need the patch panels its rust free.

62 short step · 03-14-2008, 09:48 PM

Quote:

Originally Posted by Joey~AP

Sweet truck!

Thanks!! Welcome to the forums!! Have any pics of your truck, we like pics!!

Joey~AP · 03-14-2008, 10:01 PM

Not any good ones.

My son and I are building his 1st truck.

I hope yall dont throw rocks at me, but we are taking a 66 short fleet and putting it on a 77 K5 Blazer chassis.

I thought about lengthening the frame, but we decided it would be cool if we shortened and bobbed the bed.

Just about got the frame sand blasted and primered. The body should start bein fitted next week.

jchav62 · 03-14-2008, 10:18 PM

Looks like all the new sheet metal fit together good. I had trouble with an after market fender that I bought. The front of the fender doesn't line up with the grille support. Your's looks cherry! Good work! Who did you get your stuff from?

62 short step · 03-14-2008, 11:59 PM

[
I hope yall dont throw rocks at me, but we are taking a 66 short fleet and putting it on a 77 K5 Blazer chassis.[/QUOTE]

Sounds like it will be a sweet truck when done!!

62 short step · 03-15-2008, 12:03 AM

Quote:

Originally Posted by jchav62

Looks like all the new sheet metal fit together good. I had trouble with an after market fender that I bought. The front of the fender doesn't line up with the grille support. Your's looks cherry! Good work! Who did you get your stuff from?

I bought the fenders off ebay for $165 each, and the grille support came from a board member MBGMIKE. I had to take time to fit the fender on the driver side because it didn't line up right like you said. I just egged shaped the holes to get a little adjustment and that did the trick!!

62 short step · 03-15-2008, 12:10 AM

I just started to fix the rust on the hood, here are a few pics. Well back to work!!

62 short step · 03-15-2008, 12:11 AM

A few more.

buster0104 · 03-15-2008, 12:20 AM

Looks good Jeremy! I have been outside cutting and welding on my drivers door all morning. started getting frusterated so I'm taking a break. Trying to get everything ready for the new gaskets I ordered. Keep up the good work. Dustin

Slmd92DIME · 03-15-2008, 01:15 AM

Looks good

62 short step · 03-15-2008, 02:12 AM

Thanks guys!! Dustin, sounds like your making progress too!!

283 Man · 03-15-2008, 05:26 AM

nice progress.

1Bad62Pro/Street · 03-15-2008, 05:37 AM

Good Job....It's worth it in the end..

62 short step · 03-16-2008, 11:17 PM

More pics. Finished the patch panels on hood. Started to sand whole truck down to get a coat of primer on it.

Reyals Bemus · 03-16-2008, 11:35 PM

Lookin' sweet! That'll be a really nice truck once completed.

I hope you paint it a beautiful color!

03-14-2008, 03:41 AM	#27
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Progress Some pics of new sheet metal on front!! No more rust!! Attached Images

03-14-2008, 12:01 PM	#28
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Progress so is that all repro stuff? how did it fit? Repro inners as well? I am thinking about going the repro route...

03-14-2008, 12:47 PM	#29
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Progress Looks real good you have come long way on the 61 looks like your helper enjoying too,

03-14-2008, 04:20 PM	#32
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: Progress that looks great!!! always had a soft spot for 4x4. alot of people dont like that hood but i sure do. been looking for one for my truck. anyways it looks great. John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

03-14-2008, 05:19 PM	#33
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: Progress Commin along quite nicely. Any ideas on the paint color yet? __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor

03-14-2008, 05:55 PM	#34
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: Progress Sweet truck!

03-14-2008, 10:01 PM	#38
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: Progress Not any good ones. My son and I are building his 1st truck. I hope yall dont throw rocks at me, but we are taking a 66 short fleet and putting it on a 77 K5 Blazer chassis. I thought about lengthening the frame, but we decided it would be cool if we shortened and bobbed the bed. Just about got the frame sand blasted and primered. The body should start bein fitted next week.

03-14-2008, 10:18 PM	#39
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Progress Looks like all the new sheet metal fit together good. I had trouble with an after market fender that I bought. The front of the fender doesn't line up with the grille support. Your's looks cherry! Good work! Who did you get your stuff from? __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-14-2008, 11:59 PM	#40
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Progress [ I hope yall dont throw rocks at me, but we are taking a 66 short fleet and putting it on a 77 K5 Blazer chassis.[/QUOTE] Sounds like it will be a sweet truck when done!!

03-15-2008, 12:10 AM	#42
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Progress I just started to fix the rust on the hood, here are a few pics. Well back to work!! Attached Images

03-15-2008, 12:11 AM	#43
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Progress A few more. Attached Images

03-15-2008, 12:20 AM	#44
buster0104 Registered User Join Date: Feb 2007 Location: louisiana Posts: 31	Re: Progress Looks good Jeremy! I have been outside cutting and welding on my drivers door all morning. started getting frusterated so I'm taking a break. Trying to get everything ready for the new gaskets I ordered. Keep up the good work. Dustin

03-15-2008, 01:15 AM	#45
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Progress Looks good __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=269019 Petitioning No Regrets MD/WV

03-15-2008, 02:12 AM	#46
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Progress Thanks guys!! Dustin, sounds like your making progress too!!

03-15-2008, 05:26 AM	#47
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Progress nice progress.



Register or Log In To remove these advertisements.

03-15-2008, 05:37 AM	#48
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Progress Good Job....It's worth it in the end.. __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

03-16-2008, 11:17 PM	#49
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Progress More pics. Finished the patch panels on hood. Started to sand whole truck down to get a coat of primer on it. Attached Images

03-16-2008, 11:35 PM	#50
Reyals Bemus Registered User Join Date: Dec 2007 Location: Billerica, MA Posts: 329	Re: Progress Lookin' sweet! That'll be a really nice truck once completed. I hope you paint it a beautiful color!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.