Can't find part that AD door hinge bolts into?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tenn1 · 03-30-2008, 04:26 AM

I'm getting ready to start on restoring a 52 AD 1/2 ton, have ordered most of the metal but there is a part I can't find as aftermarket and can't remember it ever being mentioned by others doing restorations.

I have to replace the driver side lower pillar panel that the lower door hinge goes into but the repair panels sold don't have what the Factory Assembly Manual (sheet#1 section #35) calls the "Hinge Panel Reinforcement" that contains strengthening straps and the captured nuts that you bolt the attaching hinge bolts into. This part is directly behind and attached to the the lower pillar opening. Mine is completely rusted away.

Where would I get that?? used parts??

Larry in Tidewater Virginia

Fred T · 03-30-2008, 06:36 AM

Welcome to the board. I don't think that part is remanned. Here is one ad in the classifieds that might have some.
http://67-72chevytrucks.com/vboard/s...d.php?t=280517

Houston54 · 03-30-2008, 07:24 AM

Edited by Mod**
Selling parts must be in the classifieds.

Where in the Hampton Roads area are you located. We lived in Hampton for a couple of years back in 87-88 and enjoyed it.

Houston54 · 04-03-2008, 07:10 PM

Note to Mod

I never said I would sell him anything. I informed him I may have one in the parts pile and to contact me directly through a PM. If we can't help out our fellow truckers in this manner than the Democrats have already won.

03-30-2008, 06:36 AM	#2
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: Can't find part that AD door hinge bolts into?? Welcome to the board. I don't think that part is remanned. Here is one ad in the classifieds that might have some. http://67-72chevytrucks.com/vboard/s...d.php?t=280517 __________________ Fred There is no such thing as too much cam...just not enough engine.

04-03-2008, 07:10 PM	#4
Houston54 Registered User Join Date: Feb 2005 Location: location Posts: 527	Re: Can't find part that AD door hinge bolts into?? Note to Mod I never said I would sell him anything. I informed him I may have one in the parts pile and to contact me directly through a PM. If we can't help out our fellow truckers in this manner than the Democrats have already won.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-30-2008, 04:26 AM	#1
tenn1 Registered User Join Date: May 2007 Location: Virginia Posts: 2	Can't find part that AD door hinge bolts into?? I'm getting ready to start on restoring a 52 AD 1/2 ton, have ordered most of the metal but there is a part I can't find as aftermarket and can't remember it ever being mentioned by others doing restorations. I have to replace the driver side lower pillar panel that the lower door hinge goes into but the repair panels sold don't have what the Factory Assembly Manual (sheet#1 section #35) calls the "Hinge Panel Reinforcement" that contains strengthening straps and the captured nuts that you bolt the attaching hinge bolts into. This part is directly behind and attached to the the lower pillar opening. Mine is completely rusted away. Where would I get that?? used parts?? Larry in Tidewater Virginia

03-30-2008, 07:24 AM	#3
Houston54 Registered User Join Date: Feb 2005 Location: location Posts: 527	Re: Can't find part that AD door hinge bolts into?? Edited by Mod** Selling parts must be in the classifieds. Where in the Hampton Roads area are you located. We lived in Hampton for a couple of years back in 87-88 and enjoyed it. Last edited by Fred T; 03-30-2008 at 01:10 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.