layen the 86 out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

azfab · 07-15-2008, 12:28 AM

[IMG][IMG]

[/IMG][/IMG][IMG][IMG]

[/IMG][/IMG]here are some pics of the 86 still needs alot of work to get this thing to lay right[IMG]

[/IMG] [IMG]

[/IMG][IMG]

[/IMG] she still needs more about three mor inches to lay right.

azfab · 07-15-2008, 12:28 AM

[IMG]

[/IMG]

Slmd92DIME · 07-15-2008, 04:31 AM

Nice looking start.. truck looks to be in great shape... looks even better sitting on the floor.. Areyou going to do a Z or a crossmember drop?

jlaird · 07-15-2008, 06:27 AM

Quote:

Originally Posted by azfab

she still needs more about three mor inches to lay right.

doesn't look like there's three more inches in that notch?? Lookin good so far though.

azfab · 07-15-2008, 10:22 AM

yeah i think a z is needed very badly. ill do it when i pull the motor its a little tired. and i still have to get drop spindels for the the front too. this truck is so clean! the body is so stright, i think is the strightest i have ever had lol.

azfab · 07-15-2008, 10:24 AM

im maxed out on the notch becase i dont want to cut the bed too muck shes got to be a work horse.[IMG]

[/IMG]

azfab · 07-15-2008, 10:29 AM

[IMG]

[/IMG]man these trucks are hard to lay, well not hard just a lot of $hit in the way. exhast, trany,crossmember. also the trans is like an inch frome the trans tunnel. so when i do the z i have to drop the motor instead of cutting the floor out. i think its easyer to fab new motor mount vs the floor what you think?

azfab · 07-15-2008, 10:31 AM

to day i will cut the bed floor and put it back on ill post some more!!

Sweet 85 C10 · 07-15-2008, 11:15 AM

Hey nice project! Hey is that your 69 C10 in the avatar also, I might be wrong on the year, but got any pics of that one! Keep up the good work!

joe231 · 07-15-2008, 11:25 AM

looking good!!!

Sweet 85 C10,
here ya go
azfab's '68 build

GMBowtie79 · 07-15-2008, 01:39 PM

azfab can you take some more pics of the 2 link set up you built and where are you puttin the bags?

87 dually burb · 07-15-2008, 09:41 PM

looks good what is done to the front to get it that low
x2 on more pic's and details of 2 link rear
I'm thinking along the same lines as you for a 2link rear
run a 2x2 bar with a 2x3 (block) welded to top
in your pic is pinion current at height
thanks

GWEE · 07-15-2008, 10:32 PM

looking good

**scotts62** · 07-15-2008, 11:02 PM

Sweet man looks good!

azfab · 07-15-2008, 11:30 PM

yeah the only bad thing is you have to set up your pinion angle @ ride highth. but its a simple system and i works well. when its layed out the pinion angle is about 9 10 degrees down hill. unies are alomost binding. if i ran longer ones it wouldnt be sutch a dreastic change with the pinion and wheel base movement. but its hard to do that on thes trucks with the frame dippen up and down. at first i had them under the frame till i noticed that i would need some drop block to aid to the drop, so i just moved them were the leaf hangers go. i built mine for 100 and some change. man i m definetly need to z her badly!!lol about 3'' to give her a nice rake. sucks for the rear but still look nice with some 20's. ill get some more pics for you guys on that 2link.

azfab · 07-15-2008, 11:58 PM

more pic[IMG]

[/IMG][IMG]

[/IMG] sorry guys have to resiz them later

Slmd92DIME · 07-16-2008, 10:17 PM

Looking really good.. keep the pictures coming

smashingchuck · 07-17-2008, 11:19 AM

are you laying down a bead when you weld or just a succession of spot welds?

azfab · 07-17-2008, 01:39 PM

Quote:

Originally Posted by smashingchuck

are you laying down a bead when you weld or just a succession of spot welds?

stiching

azfab · 07-17-2008, 01:40 PM

just got the tbi unit soon will be zing the fram ill keep you guys updated

azfab · 07-17-2008, 11:41 PM

ok help me out if i do a 3.5 or 4'' z it will lay hard but.. it will sit a little racked. whitch is ok the problem is i realy dont want to cut into the cab floor. i think if my musurments are correct ill have to drop the engine down and make a new tranny crossmember, witch is easy. i just dont want to go too over board with this truck lol. but still be a nice ride. what you guy think?

joe231 · 07-18-2008, 01:36 AM

Quote:

Originally Posted by azfab

stiching

can i ask why???

azfab · 07-18-2008, 09:57 AM

Quote:

Originally Posted by joe231

can i ask why???

why stich? its almost the same when you tig just dosent look as pretty as a tig. we do all our welds like this all over the plant. expecaly alumanum. ill have some better pics to post that show a little more

azfab · 07-18-2008, 10:26 AM

Quote:

Originally Posted by azfab

why stich? its almost the same when you tig just dosent look as pretty as a tig. we do all our welds like this all over the plant. expecaly alumanum. ill have some better pics to post that show a little more

well all the pic i have are alum sorry[IMG]

[/IMG] but i love to wel alum!!!

07-15-2008, 12:28 AM	#1
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	layen the 86 out [IMG][IMG][/IMG][/IMG][IMG][IMG][/IMG][/IMG]here are some pics of the 86 still needs alot of work to get this thing to lay right[IMG][/IMG] [IMG][/IMG][IMG][/IMG] she still needs more about three mor inches to lay right. __________________ lifes short fabricate as much as you can!

07-15-2008, 12:28 AM	#2
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	Re: layen the 86 out [IMG][/IMG] __________________ lifes short fabricate as much as you can!

07-15-2008, 04:31 AM	#3
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: layen the 86 out Nice looking start.. truck looks to be in great shape... looks even better sitting on the floor.. Areyou going to do a Z or a crossmember drop? __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=269019 Petitioning No Regrets MD/WV

07-15-2008, 10:22 AM	#5
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	Re: layen the 86 out yeah i think a z is needed very badly. ill do it when i pull the motor its a little tired. and i still have to get drop spindels for the the front too. this truck is so clean! the body is so stright, i think is the strightest i have ever had lol. __________________ lifes short fabricate as much as you can!

07-15-2008, 10:24 AM	#6
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	Re: layen the 86 out im maxed out on the notch becase i dont want to cut the bed too muck shes got to be a work horse.[IMG][/IMG] __________________ lifes short fabricate as much as you can!

07-15-2008, 10:29 AM	#7
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	Re: layen the 86 out [IMG][/IMG]man these trucks are hard to lay, well not hard just a lot of $hit in the way. exhast, trany,crossmember. also the trans is like an inch frome the trans tunnel. so when i do the z i have to drop the motor instead of cutting the floor out. i think its easyer to fab new motor mount vs the floor what you think? __________________ lifes short fabricate as much as you can!

07-15-2008, 10:31 AM	#8
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	Re: layen the 86 out to day i will cut the bed floor and put it back on ill post some more!! __________________ lifes short fabricate as much as you can!

07-15-2008, 11:15 AM	#9
Sweet 85 C10 OG Join Date: Sep 2007 Location: Orlando Florida Posts: 146	Re: layen the 86 out Hey nice project! Hey is that your 69 C10 in the avatar also, I might be wrong on the year, but got any pics of that one! Keep up the good work!

07-15-2008, 11:25 AM	#10
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: layen the 86 out looking good!!! Sweet 85 C10, here ya go azfab's '68 build __________________ *CHEVY ONLY* Last edited by joe231; 07-15-2008 at 11:25 AM.

07-15-2008, 01:39 PM	#11
GMBowtie79 Surviving, one day at a time! Join Date: Jan 2008 Location: Turlock,CA Posts: 295	Re: layen the 86 out azfab can you take some more pics of the 2 link set up you built and where are you puttin the bags? __________________ 79 Burb,350,tremic 5 spd, 4 wheel disc, daily driver 74 swb,350,350,driver & future project "There's no such thing as a finished project"

07-15-2008, 09:41 PM	#12
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: layen the 86 out looks good what is done to the front to get it that low x2 on more pic's and details of 2 link rear I'm thinking along the same lines as you for a 2link rear run a 2x2 bar with a 2x3 (block) welded to top in your pic is pinion current at height thanks __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

07-15-2008, 10:32 PM	#13
GWEE Registered User Join Date: Jan 2007 Location: LOUISIANA Posts: 151	Re: layen the 86 out looking good __________________ 1985 GMC ( future plan pro tour build for the wife ) Black 2013 GMC single cab 4/7 drop on 24'' Torque Thrust ST rules

07-15-2008, 11:02 PM	#14
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: layen the 86 out Sweet man looks good! __________________ Scott 93 crew cab build Project 62

07-15-2008, 11:30 PM	#15
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	Re: layen the 86 out yeah the only bad thing is you have to set up your pinion angle @ ride highth. but its a simple system and i works well. when its layed out the pinion angle is about 9 10 degrees down hill. unies are alomost binding. if i ran longer ones it wouldnt be sutch a dreastic change with the pinion and wheel base movement. but its hard to do that on thes trucks with the frame dippen up and down. at first i had them under the frame till i noticed that i would need some drop block to aid to the drop, so i just moved them were the leaf hangers go. i built mine for 100 and some change. man i m definetly need to z her badly!!lol about 3'' to give her a nice rake. sucks for the rear but still look nice with some 20's. ill get some more pics for you guys on that 2link. __________________ lifes short fabricate as much as you can!

07-15-2008, 11:58 PM	#16
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	Re: layen the 86 out more pic[IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG] sorry guys have to resiz them later __________________ lifes short fabricate as much as you can!



Register or Log In To remove these advertisements.

07-16-2008, 10:17 PM	#17
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: layen the 86 out Looking really good.. keep the pictures coming __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=269019 Petitioning No Regrets MD/WV

07-17-2008, 11:19 AM	#18
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: layen the 86 out are you laying down a bead when you weld or just a succession of spot welds? __________________ 78 Build Thread 4Runner Build

07-17-2008, 01:40 PM	#20
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	Re: layen the 86 out just got the tbi unit soon will be zing the fram ill keep you guys updated __________________ lifes short fabricate as much as you can!

07-17-2008, 11:41 PM	#21
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	Re: layen the 86 out ok help me out if i do a 3.5 or 4'' z it will lay hard but.. it will sit a little racked. whitch is ok the problem is i realy dont want to cut into the cab floor. i think if my musurments are correct ill have to drop the engine down and make a new tranny crossmember, witch is easy. i just dont want to go too over board with this truck lol. but still be a nice ride. what you guy think? __________________ lifes short fabricate as much as you can!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.