|
08-14-2008, 12:56 PM
|
#1 |
|
Junior Member
Join Date: Sep 2005
Location: Minnesota
Posts: 159
|
Body mounts
Does anybody know what the difference between the 2wd and 4wd body mounts is? Has anybody bought and installed the energy suspension kit from summit in a 2wd?
Thanks Josh
__________________
1970 blazer, street/strip project 1963 ford fairlane sports coupe 50,000 original miles |
|
|
|
08-14-2008, 02:41 PM
|
#2 |
|
Registered User
Join Date: Dec 2004
Location: Northern AZ
Posts: 7,270
|
Re: Body mounts
Maybe the mounts are thicker on the 4X, but I am not sure there is a difference. I installed a set of Urethanes on my 4X, pretty straight forward, do one at a time (one side if you have to.) Good Luck
|
|
|
|
|
08-14-2008, 07:16 PM
|
#3 |
|
Active Member
Join Date: Jun 2005
Location: Idaho
Posts: 263
|
Re: Body mounts
I got a set of repo rubber mounts from LMC, they were individually packaged by part # so if you looked at the LMC exploded diagram in their catalog, you can't go wrong knowing which mount was meant to go where. I figured that if rubber mounts lasted originally for 30+ years I'm not too worried about wear at my age...30 years from now I won't care and the price was right. Did a side at a time, there is a great post here on this site (I think in the FAQ's) that will guide you through it.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
