292 inline 6 cyl F/S Alabama - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67_C-30 · 08-21-2008, 11:36 PM

I finally got the 292 out of my '67 C-30 that I'm doing the diesel swap on. The engine ran, but is tired. It has some ring blowby, and has a skip, but I haven't driven it alot, and I know it doesn't have any serious damage. I drove it about 2 miles to the shop where we pulled the engine out. I am selling it as buildable engine that needs freshening up. I'll take $150 for it including all brackets, carb, distributor, motor mounts, flywheel, and Z bar bracket. If it doesn't sell, I will sell parts separately. Here is a few pics of it and video clip of it running.

67_C-30 · 08-23-2008, 03:40 PM

bump

shaneschevys · 08-23-2008, 03:59 PM

If it doesnt sell How much for the carb & all the throttle linkage?

67_C-30 · 08-23-2008, 05:21 PM

Quote:

Originally Posted by shaneschevys

If it doesnt sell How much for the carb & all the throttle linkage?

If it doesn't sell, I'll put you inline for the parts

100%Chevy · 08-23-2008, 11:12 PM

Did it have A/C or power steering?I need the brackets and pulleys for these options.
Mike.

67_C-30 · 08-23-2008, 11:50 PM

Quote:

Originally Posted by 100%Chevy

Did it have A/C or power steering?I need the brackets and pulleys for these options.
Mike.

No, it doesn't have either.

bw4sale · 08-24-2008, 08:17 AM

I might be interested. How long will you wait before you start stripping parts?

And, where in Alabama are you?

rodstored-72 · 08-24-2008, 10:38 AM

check with mahanian (board member) he may be interested.

thirdstreettito · 08-24-2008, 11:13 AM

Bob####'s 12 year old daughter needs one. Maybe he'll pop in here too.

67_C-30 · 08-25-2008, 02:03 AM

Quote:

Originally Posted by thirdstreettito

Bob####'s 12 year old daughter needs one. Maybe he'll pop in here too.

Maybe, but if were Bob, I'd be looking for a 250 for his daughter's truck. The 292's are awesome for what they are, but not the best engine on gas.

67_C-30 · 08-25-2008, 02:05 AM

Quote:

Originally Posted by bw4sale

I might be interested. How long will you wait before you start stripping parts?

And, where in Alabama are you?

I'm not sure, what did you have in mind? I am right on the the AL/GA line about 80 miles SW of Atlanta. Valley - 36854, if you want to Mapquest it.

bw4sale · 08-25-2008, 10:58 AM

I'm just trying to decide what I want to use in my truck. I like the idea of using a six banger because it is different than all the 350's running around and I can't afford a big block. I've heard good things about the 292 but I don't know much about it. I'm trying to do some research on it now. Don't mean to leave you hanging. Ooh...I just mapquested it and you're a little farther than was hoping. 5hrs.

manimal · 08-30-2008, 01:35 AM

keep that six! I just replaced the 350 3spd man in my '75 with a 292 th350 and what a FUN truck to drive!
-Lance

manimal · 09-08-2008, 12:06 AM

are you parting this out yet? If so I would be interested in the carb and valve cover if its the chevrolet script cover and nice.
-Lance

08-21-2008, 11:36 PM	#1
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	292 inline 6 cyl F/S Alabama I finally got the 292 out of my '67 C-30 that I'm doing the diesel swap on. The engine ran, but is tired. It has some ring blowby, and has a skip, but I haven't driven it alot, and I know it doesn't have any serious damage. I drove it about 2 miles to the shop where we pulled the engine out. I am selling it as buildable engine that needs freshening up. I'll take $150 for it including all brackets, carb, distributor, motor mounts, flywheel, and Z bar bracket. If it doesn't sell, I will sell parts separately. Here is a few pics of it and video clip of it running. Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 08-21-2008 at 11:37 PM.

08-23-2008, 03:40 PM	#2
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: 292 inline 6 cyl F/S Alabama bump __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

08-23-2008, 03:59 PM	#3
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 292 inline 6 cyl F/S Alabama If it doesnt sell How much for the carb & all the throttle linkage? __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

08-23-2008, 11:12 PM	#5
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 292 inline 6 cyl F/S Alabama Did it have A/C or power steering?I need the brackets and pulleys for these options. Mike.

08-24-2008, 08:17 AM	#7
bw4sale Registered User Join Date: Sep 2006 Location: Hendersonville, TN Posts: 1,528	Re: 292 inline 6 cyl F/S Alabama I might be interested. How long will you wait before you start stripping parts? And, where in Alabama are you? __________________ BRENT -'68 Stepside Project -'98 Z71 Daily Driver -Enough extra parts to build another truck and a half Last edited by bw4sale; 08-24-2008 at 08:17 AM.

08-24-2008, 10:38 AM	#8
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,012	Re: 292 inline 6 cyl F/S Alabama check with mahanian (board member) he may be interested.

08-24-2008, 11:13 AM	#9
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: 292 inline 6 cyl F/S Alabama Bob####'s 12 year old daughter needs one. Maybe he'll pop in here too. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

08-25-2008, 10:58 AM	#12
bw4sale Registered User Join Date: Sep 2006 Location: Hendersonville, TN Posts: 1,528	Re: 292 inline 6 cyl F/S Alabama I'm just trying to decide what I want to use in my truck. I like the idea of using a six banger because it is different than all the 350's running around and I can't afford a big block. I've heard good things about the 292 but I don't know much about it. I'm trying to do some research on it now. Don't mean to leave you hanging. Ooh...I just mapquested it and you're a little farther than was hoping. 5hrs. __________________ BRENT -'68 Stepside Project -'98 Z71 Daily Driver -Enough extra parts to build another truck and a half

08-30-2008, 01:35 AM	#13
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: 292 inline 6 cyl F/S Alabama keep that six! I just replaced the 350 3spd man in my '75 with a 292 th350 and what a FUN truck to drive! -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

09-08-2008, 12:06 AM	#14
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: 292 inline 6 cyl F/S Alabama are you parting this out yet? If so I would be interested in the carb and valve cover if its the chevrolet script cover and nice. -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.