How about some pics of bagged C-10's - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10addict · 09-10-2008, 10:22 PM

Well here are the pics I promised of my new rat/shop/hot rod truck... Its a 64 C10 350 with a 700R4 and a 3:42 posi rear.. Porterbuilt Dropmember with ART control arms, KP notch with 2 inch blocks... 91 Chevy seat with the frame cut down and recovered black/houndstooth. 19 gallon fuel tank between the rear frame rails. bed floor was raised so the floor was still flat... truck drives so freakin nice its unreal... Front inner fenders fabbed and hinges moved to firewall.. All the logos are new but weathered to look old.. They are from dragstips in the local area that closed in the late 70's Don't pay attention to the date stamp on the pics...

**scotts62** · 09-10-2008, 10:28 PM

Quote:

Originally Posted by bagged69c10

I know I couldn't do it without friends. I just wish they had the talent I need.LOL

funny how it works that way huh.. oh well we all usually figure it out one way or another

baggedcten · 09-10-2008, 10:33 PM

heres my truck 86 this pic kind of old im in the process of doing a four link with the bag on bars and cutting the cups up front would post a newer pic but dont have a camera

lets see if this works

PipsC10 · 09-10-2008, 10:53 PM

c10addict, that truck is absolutely drop dead gorgeous! I love everything about it. I have seriously contemplated doing the same thing to mine, new drivetrain with modern suspension and rat the rest of it! Paint is too damn expensive. Nice ride.

c10addict · 09-11-2008, 12:46 AM

Quote:

Originally Posted by PipsC10

c10addict, that truck is absolutely drop dead gorgeous! I love everything about it. I have seriously contemplated doing the same thing to mine, new drivetrain with modern suspension and rat the rest of it! Paint is too damn expensive. Nice ride.

Thanks... I love it... its out in my driveway all night while my 68 rests under a cover and I worry about something happening to it.. Its great to be able to just drive it and not worry about if it gets caught in the rain or little scratches... I take my dog for rides in the 64 and actually use it like a truck is meant to be used... Plus I let my future wife take i and drive it and not worry... that alone is priceless..

PBFAB.COM · 09-11-2008, 01:53 AM

Quote:

Originally Posted by c10addict

Well here are the pics I promised of my new rat/shop/hot rod truck... Its a 64 C10 350 with a 700R4 and a 3:42 posi rear.. Porterbuilt Dropmember with ART control arms, KP notch with 2 inch blocks... 91 Chevy seat with the frame cut down and recovered black/houndstooth. 19 gallon fuel tank between the rear frame rails. bed floor was raised so the floor was still flat... truck drives so freakin nice its unreal... Front inner fenders fabbed and hinges moved to firewall.. All the logos are new but weathered to look old.. They are from dragstips in the local area that closed in the late 70's Don't pay attention to the date stamp on the pics...

I absolutely love it!

c10addict · 09-11-2008, 07:26 AM

Quote:

Originally Posted by porterbuilt

I absolutely love it!

Thanks Nate... Thanks for your help with the sway bar as well, its ordered and on its way..

crawdadfox · 09-11-2008, 07:28 AM

c10addict, I love your "New" shop truck! You have sooooo much more fun with the Not shiney one's!!!!!

smashingchuck · 09-11-2008, 09:14 AM

Quote:

Originally Posted by c10addict

Thanks Nate... Thanks for your help with the sway bar as well, its ordered and on its way..

not to get to far off topic here, but please PM me about the sway bar you speak of. A part number would be awesome. I just happen to have my other browser tab open to summit trying to find one, and they make a blu emillion of them.

isdeleon · 09-11-2008, 09:44 AM

Quote:

Originally Posted by c10addict

Plus I let my future wife take i and drive it and not worry... that alone is priceless..

you're a brave man...

bagged69c10 · 09-11-2008, 11:55 PM

C10addict. Who made those front tubs? I want some!

Dinos63 · 09-12-2008, 12:42 AM

Quote:

Originally Posted by c10addict

Well here are the pics I promised of my new rat/shop/hot rod truck... Its a 64 C10 350 with a 700R4 and a 3:42 posi rear.. Porterbuilt Dropmember with ART control arms, KP notch with 2 inch blocks... 91 Chevy seat with the frame cut down and recovered black/houndstooth. 19 gallon fuel tank between the rear frame rails. bed floor was raised so the floor was still flat... truck drives so freakin nice its unreal... Front inner fenders fabbed and hinges moved to firewall.. All the logos are new but weathered to look old.. They are from dragstips in the local area that closed in the late 70's Don't pay attention to the date stamp on the pics...

dude dig the truck , nice work , well done

c10addict · 09-12-2008, 07:38 AM

Quote:

Originally Posted by bagged69c10

C10addict. Who made those front tubs? I want some!

they have two websites

www.rpmpgh.com or www.goprorides.com The only problem is they just kinda threw them together one night and didnt keep any measurements... I am at the shop all the time and can have them measure them up and maybe make another set..

c10addict · 09-12-2008, 07:39 AM

Quote:

Originally Posted by Dinos63

dude dig the truck , nice work , well done

Thanks Dino... You got a bad a$$ collection !!!! My inspiration!

babyblueoval · 09-17-2008, 09:23 AM

Quote:

Originally Posted by smashingchuck

not to get to far off topic here, but please PM me about the sway bar you speak of. A part number would be awesome.

X2 - or post it on here for everyones use.

SCOTI · 09-17-2008, 12:04 PM

Quote:

Originally Posted by smashingchuck

not to get to far off topic here, but please pm me about the sway bar you speak of. A part number would be awesome....

x3 . . .....

smashingchuck · 09-17-2008, 01:52 PM

Quote:

Originally Posted by SCOTI

x3 . . .....

here's what I ended up doing based on what he told me. He recommended that I buy a Addco unit and have it custom bent. However, since I currently dont have sway bar mounts at all and would have to weld them on, I just went with the one that summit sells for our trucks and will fab the control arms mounts based on that.

http://store.summitracing.com/partde...5&autoview=sku

c10addict · 09-17-2008, 08:51 PM

Quote:

Originally Posted by smashingchuck

here's what I ended up doing based on what he told me. He recommended that I buy a Addco unit and have it custom bent. However, since I currently dont have sway bar mounts at all and would have to weld them on, I just went with the one that summit sells for our trucks and will fab the control arms mounts based on that.

http://store.summitracing.com/partde...5&autoview=sku

Nate at Porterbuilt directed me to Addco, they took a 67 to 72 bar and bent it in an additional inch on each side to work with the dropmember.. $138.00 to my door and I had it in less than a week... Great company to deal with!

SCOTI · 09-17-2008, 09:08 PM

Quote:

Originally Posted by c10addict

Nate at Porterbuilt directed me to Addco, they took a 67 to 72 bar and bent it in an additional inch on each side to work with the dropmember.. $138.00 to my door and I had it in less than a week... Great company to deal with!

Are you using GM a-arms or ART's?

Dinos63 · 09-17-2008, 09:10 PM

this is a bit different ? c10 bag on 37x17teens, and these are not photoshopped. its wicked to drive

**scotts62** · 09-17-2008, 09:27 PM

Dino that is awesome!!!! I bet it really is fun to drive

c10addict · 09-17-2008, 10:05 PM

Quote:

Originally Posted by SCOTI

Are you using GM a-arms or ART's?

ART arms

hollywood68 · 09-19-2008, 12:23 PM

made a couple changes...

**scotts62** · 09-19-2008, 06:06 PM

Cool man

redneckdds · 09-19-2008, 08:03 PM

Dino.... nice "lot" o' cars you have there at your place... cant believe you have a volkswagen parked in the driveway tho... very disappointed!!!

09-10-2008, 10:22 PM	#151
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: post all bagged c10 here Well here are the pics I promised of my new rat/shop/hot rod truck... Its a 64 C10 350 with a 700R4 and a 3:42 posi rear.. Porterbuilt Dropmember with ART control arms, KP notch with 2 inch blocks... 91 Chevy seat with the frame cut down and recovered black/houndstooth. 19 gallon fuel tank between the rear frame rails. bed floor was raised so the floor was still flat... truck drives so freakin nice its unreal... Front inner fenders fabbed and hinges moved to firewall.. All the logos are new but weathered to look old.. They are from dragstips in the local area that closed in the late 70's Don't pay attention to the date stamp on the pics... Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 09-10-2008 at 10:24 PM.

09-10-2008, 10:33 PM	#153
baggedcten 86 C10 Join Date: Sep 2007 Location: Ga. Posts: 416	Re: post all bagged c10 here heres my truck 86 this pic kind of old im in the process of doing a four link with the bag on bars and cutting the cups up front would post a newer pic but dont have a camera lets see if this works __________________ 1986 C10 2001 chevy silverado purchased 8-29-09 sold 2004 silverado purchased 8-27-10 sold Last edited by baggedcten; 09-10-2008 at 10:39 PM. Reason: add pic

09-10-2008, 10:53 PM	#154
PipsC10 Registered User Join Date: Jan 2008 Location: Oakdale, Ca Posts: 655	Re: post all bagged c10 here c10addict, that truck is absolutely drop dead gorgeous! I love everything about it. I have seriously contemplated doing the same thing to mine, new drivetrain with modern suspension and rat the rest of it! Paint is too damn expensive. Nice ride. __________________ 1970 2wd short/fleet 350/350 Project "iced green dream" http://67-72chevytrucks.com/vboard/s...d.php?t=272702 2006 Toyota Tacoma double cab 4x4

09-11-2008, 07:28 AM	#158
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: post all bagged c10 here c10addict, I love your "New" shop truck! You have sooooo much more fun with the Not shiney one's!!!!!

09-11-2008, 11:55 PM	#161
bagged69c10 soon to be bagged64sub Join Date: Feb 2005 Location: DFW-currently phoenix Posts: 635	Re: post all bagged c10 here C10addict. Who made those front tubs? I want some! __________________ 1969 c-10, bagged, Zd, 20" Boyds SOLD! 1964 Suburban COMING SOON Build threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=304726 1965 c-10 long bed 1993 Sierra x-cab 1999 tahoe-4/5 on 22s 2005 Chevy work truck

09-17-2008, 09:10 PM	#170
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: post all bagged c10 here this is a bit different ? c10 bag on 37x17teens, and these are not photoshopped. its wicked to drive Attached Images __________________ CHEVY ONLY... Nothin Else !

09-17-2008, 09:27 PM	#171
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: post all bagged c10 here Dino that is awesome!!!! I bet it really is fun to drive __________________ Scott 93 crew cab build Project 62

09-19-2008, 12:23 PM	#173
hollywood68 Registered User Join Date: Mar 2008 Location: Denver, Colorado Posts: 69	Re: post all bagged c10 here made a couple changes...

09-19-2008, 06:06 PM	#174
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: post all bagged c10 here Cool man __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 09-19-2008 at 06:06 PM.

09-19-2008, 08:03 PM	#175
redneckdds Senior Member Join Date: Nov 2005 Location: Queen Creek, AZ Posts: 218	Re: post all bagged c10 here Dino.... nice "lot" o' cars you have there at your place... cant believe you have a volkswagen parked in the driveway tho... very disappointed!!! __________________ '67/70 Chevy C/10 '10 2500 Crewcab Duramax 4wd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.