New Engine Pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

79BIG10 · 02-15-2003, 02:59 PM

Well as some of you may know I got some new valve covers for Christmas. I then needed new wire looms to keep from scratching the new ones. Well then I decided to get a new braided fuel line and Edelbrock fuel line with inline filter since my rubber line and inline paper filter just didn't look right. Then the alternator started acting up and the battery cable incident. I was able to get a 1 wire coverted alternator along with getting rid of the wire loom junk from factory. After all this and a few more minor things I did
Future plans still include MSD red wires (yellow don't look right), new fuel pump (mechanical) and redo my tranny lines. Along with the one below here's some more pics

Engine Pics If you need part numbers let me know and I'll post all I used

BTW: The spot on the air cleaner lid is a problem with the reflection of the camera. It's all clean

brad2 · 02-15-2003, 03:12 PM

Looking good!

Razorback_Fan · 02-15-2003, 05:56 PM

Very nice I hope to get mine looking like that one day.

PHOENIX · 02-15-2003, 05:57 PM

Damn Brandon, its looking real nice in your engine bay! All you need now is to coat the headers.

**swervin ervin** · 02-15-2003, 06:15 PM

Cool. Looks great Brandon. I see you replaced the hose clamp before taking the pic.

Good work man. Keep it up. I bet you got a grin from ear to ear now.

Big Paul · 02-15-2003, 11:05 PM

Looks awesome B-man!

I agree red wires will set it off 10x better. Those yellow ones aren't cutting it.

Like that chrome alternator, or what I can see of it!

Bowed · 02-16-2003, 12:03 AM

Now i'm jealous,

All joking aside thats a real good job and the chrome looks just right .

low 84 · 02-16-2003, 01:05 AM

wow man. that looks totaly different from before. that is sweet.

gchemist · 02-16-2003, 05:02 AM

Nice pictures.

I especially like the fuel line. Where did you get it?

79BIG10 · 02-16-2003, 08:39 AM

Eddie- I will when I get a new set later on after alot more stuff has been done. I'll get them coated like Mike's.

Mike- I hoped you would notice that.

I did it just for you

Paul- I agree totally with the red wires. The red script on the covers will look good with them later on. Also if you go to the Engine Pics in the first post you can see more pics of the alt.

Ryan- Yeah it has been a while since we've been able to hook up. Looks alot different there and same old brown on the outside.

G- I bought it off Ebay for $35 brand new but you can get it at Summit or Jegs as well. Here's a link- http://store.summitracing.com/partdetail.asp?part=35233 You can also get the line without the filter but might as well get it since you'll need one anyways.

Thanks for the compliments everyone

Too bad Dave ain't here to see them since he's wanted to see the covers and looms for forever now

bigd65 · 02-16-2003, 08:53 AM

hey B, i do like that , but i do have to disagree. i think yellow wires look good as well.

CustomChevy · 02-16-2003, 04:09 PM

very nice B. gotta love that big k&n filter.

84Stepper · 02-16-2003, 07:41 PM

Hey B, everything looks great. A chrome alternator is next up on my list.

BigRed · 02-17-2003, 09:45 AM

Looks great Brandon! I am truly jealous.

I agree with Eddie, it's coating time for those headers. They stand out more now that you have all that pretty chrome under there. Oh, and excellent choice on the valve covers! I was wandering how they would look.

Low87 · 02-17-2003, 10:11 AM

Looks nice Brandon!

PHOENIX · 02-17-2003, 01:07 PM

I was gonna say it too, but I really cant decide. I think the yellow wires look pretty good with everything else, but red would look good to. Yellow draws alot of attention, and your wires are run clean, looks good. Dont change them untill its time.

79BIG10 · 02-17-2003, 08:10 PM

Thanks guys

I think the red wires will look better with the script on the covers more than the yellow. Plus the MSD flow much better than the Accells.

Big Paul · 02-17-2003, 08:32 PM

Brandon, you don't to make any excuses for the red wires, just get em!

They'll look awesome. I agree with Eddie, I think you should coat those headers. You'll have a show truck engine bay in a farm truck, what can be better!

79BIG10 · 02-18-2003, 05:33 PM

Maybe getting the OD tranny (still looking for a 700r4 or 4L80e and manual shift it with the 3.73 in back to make it haev more guts than it has now would be great

)

**Captkaos** · 02-18-2003, 05:40 PM

Looks sweet B, good work!

Myride · 02-18-2003, 09:13 PM

nice

LOHRTBT · 02-19-2003, 01:54 PM

Looks nice B!!! cant wait to get mine!!

79BIG10 · 02-20-2003, 09:35 AM

I bet you're glad to finally see them huh Dave?

LOHRTBT · 02-20-2003, 10:47 AM

yeah...its about time slacker!!

02-15-2003, 02:59 PM	#1
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	New Engine Pics Well as some of you may know I got some new valve covers for Christmas. I then needed new wire looms to keep from scratching the new ones. Well then I decided to get a new braided fuel line and Edelbrock fuel line with inline filter since my rubber line and inline paper filter just didn't look right. Then the alternator started acting up and the battery cable incident. I was able to get a 1 wire coverted alternator along with getting rid of the wire loom junk from factory. After all this and a few more minor things I did Future plans still include MSD red wires (yellow don't look right), new fuel pump (mechanical) and redo my tranny lines. Along with the one below here's some more pics Engine Pics If you need part numbers let me know and I'll post all I used BTW: The spot on the air cleaner lid is a problem with the reflection of the camera. It's all clean __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

02-15-2003, 05:57 PM	#4
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Damn Brandon, its looking real nice in your engine bay! All you need now is to coat the headers. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

02-15-2003, 06:15 PM	#5
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Cool. Looks great Brandon. I see you replaced the hose clamp before taking the pic. Good work man. Keep it up. I bet you got a grin from ear to ear now. __________________ Mike 1985 Chevy C-10

02-15-2003, 11:05 PM	#6
Big Paul Iamnotanofficerofthelaw Join Date: Feb 2002 Location: Turlock, California Posts: 352	Looks awesome B-man! I agree red wires will set it off 10x better. Those yellow ones aren't cutting it. Like that chrome alternator, or what I can see of it! __________________ ~Paul~ '96 C1500 Silverado- Vortec 5.0L/Exhaust/Stock '87 S-10 Ext Cab- 2.8L/700r4 KIA Caught fire 12/7/03 Last edited by Big Paul; 02-15-2003 at 11:15 PM.

02-16-2003, 01:05 AM	#8
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	wow man. that looks totaly different from before. that is sweet. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

02-15-2003, 03:12 PM	#2
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	Looking good!

02-15-2003, 05:56 PM	#3
Razorback_Fan Registered User Join Date: Nov 2002 Location: Katy Tx Posts: 188	Very nice I hope to get mine looking like that one day.

02-16-2003, 12:03 AM	#7
Bowed Registered User Join Date: Oct 2002 Location: where it's hot Posts: 1,059	Now i'm jealous, All joking aside thats a real good job and the chrome looks just right .

02-16-2003, 05:02 AM	#9
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Nice pictures. I especially like the fuel line. Where did you get it? __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

02-16-2003, 08:39 AM	#10
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Eddie- I will when I get a new set later on after alot more stuff has been done. I'll get them coated like Mike's. Mike- I hoped you would notice that. I did it just for you Paul- I agree totally with the red wires. The red script on the covers will look good with them later on. Also if you go to the Engine Pics in the first post you can see more pics of the alt. Ryan- Yeah it has been a while since we've been able to hook up. Looks alot different there and same old brown on the outside. G- I bought it off Ebay for $35 brand new but you can get it at Summit or Jegs as well. Here's a link- http://store.summitracing.com/partdetail.asp?part=35233 You can also get the line without the filter but might as well get it since you'll need one anyways. Thanks for the compliments everyone Too bad Dave ain't here to see them since he's wanted to see the covers and looms for forever now __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

02-16-2003, 08:53 AM	#11
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,935	hey B, i do like that , but i do have to disagree. i think yellow wires look good as well. __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe

02-16-2003, 04:09 PM	#12
CustomChevy Registered User Join Date: Nov 2002 Posts: 461	very nice B. gotta love that big k&n filter.

02-16-2003, 07:41 PM	#13
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Hey B, everything looks great. A chrome alternator is next up on my list. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

02-17-2003, 09:45 AM	#14
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Looks great Brandon! I am truly jealous. I agree with Eddie, it's coating time for those headers. They stand out more now that you have all that pretty chrome under there. Oh, and excellent choice on the valve covers! I was wandering how they would look. __________________ Scott Shelbourne

02-17-2003, 10:11 AM	#15
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Looks nice Brandon! __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin



Register or Log In To remove these advertisements.

02-17-2003, 01:07 PM	#16
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	I was gonna say it too, but I really cant decide. I think the yellow wires look pretty good with everything else, but red would look good to. Yellow draws alot of attention, and your wires are run clean, looks good. Dont change them untill its time. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

02-17-2003, 08:10 PM	#17
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Thanks guys I think the red wires will look better with the script on the covers more than the yellow. Plus the MSD flow much better than the Accells. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

02-17-2003, 08:32 PM	#18
Big Paul Iamnotanofficerofthelaw Join Date: Feb 2002 Location: Turlock, California Posts: 352	Brandon, you don't to make any excuses for the red wires, just get em! They'll look awesome. I agree with Eddie, I think you should coat those headers. You'll have a show truck engine bay in a farm truck, what can be better! __________________ ~Paul~ '96 C1500 Silverado- Vortec 5.0L/Exhaust/Stock '87 S-10 Ext Cab- 2.8L/700r4 KIA Caught fire 12/7/03

02-18-2003, 05:33 PM	#19
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Maybe getting the OD tranny (still looking for a 700r4 or 4L80e and manual shift it with the 3.73 in back to make it haev more guts than it has now would be great ) __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

02-18-2003, 05:40 PM	#20
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Looks sweet B, good work! __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

02-18-2003, 09:13 PM	#21
Myride Registered User Join Date: Mar 2002 Location: Pacific Northwest Posts: 292	nice

02-19-2003, 01:54 PM	#22
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Looks nice B!!! cant wait to get mine!! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

02-20-2003, 09:35 AM	#23
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	I bet you're glad to finally see them huh Dave? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

02-20-2003, 10:47 AM	#24
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	yeah...its about time slacker!! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.