EZ wiring my 65 PU, Sorry worn out subject - The 1947 - Present Chevrolet & GMC Truck Message Board Network

guzzidude · 11-02-2008, 03:59 PM

I have a 65 Short Fleet on a 60-? GMC? frame I think. It has rear leaf springs and a long serial # on the frame. It has a 69 - 350 w/ 70-? heads, hei ign. This is a real Frankenstein so you can imagine the wiring issues I am having with my EZ harness. I have searched here and found many resources, but I am still unsure about most of it. I am an electrical idiot. The main problems are: Do I use the original terminal block and horn relay (what wires?). The headlight switch and turn signals switch wires.. etc. Anyone have a new wiring map diagram? I am really sorry about posting a worn out topic. Anyone live near Gainesville FL to give me a lesson?

Thanks!

PrerunnerRob · 11-02-2008, 10:37 PM

Here is a post with a 1964 diagram, it should be the same. Keep us all posted on how it goes!

guzzidude · 11-03-2008, 01:17 AM

Thanks bob. I found that diagram and some stuff on the stovebolt page. I just don't know if I am supposed to use the original horn relay and voltage regulator with the kit. Do I need a terminal block? Thanks. I am starting to get the hang of it a little.

**ChiefRocka** · 11-03-2008, 09:29 AM

Does EZ have a horn relay elsewhere in the harness ? I did away with my stock horn relay, and ran a new one and two more for "full power" headlights.

Cleans up that area a bit.

I also used a one wire alternator, ran that wire to the starter terminal.

guzzidude · 11-03-2008, 10:16 AM

It has a horn relay that mounts near the panel. I just wanted to find out if the EZ horn relay bypasses that original horn relay clump? And I have the early alternator with the voltage block: F234. The Ez diagram shows the exciter wire splitting to # 3 and 4 terminals and F and 2 are running to the alternator plug. And I assume Alt PWR Red comes from the fuse block? I have been figuring some things out staring at the diagrams and looking online, but I think I am making it complicated thinking I will do something terribly wrong, so I question my own thoughts... Aahhgg. Thanks!

guzzidude · 11-03-2008, 07:12 PM

I am starting to get it. Should I use the voltage regulator and how is that wired if so? It it missing the neutral safety switch, do I need to get another one? Thanks gents.

Rogue 64 · 11-03-2008, 08:50 PM

Hey, you stole my mutt!

guzzidude · 11-03-2008, 10:20 PM

Quote:

Originally Posted by Rogue 64

Hey, you stole my mutt!

That's a beautiful dog you got there! Mine is Zero and 7yrs old. My best bud.

Rogue 64 · 11-04-2008, 09:19 AM

Mine is Beauregard, but we call him Beaux.
He is a rescue, and 3 years this week.

Note! White dogs are not good shop dogs.

ChopperDr · 11-04-2008, 11:32 AM

Thats a great looking dog.

Chop

guzzidude · 11-06-2008, 11:14 PM

What terminals are used on the neutral safety switch? There are four on mine.

11-02-2008, 03:59 PM	#1
guzzidude Registered User Join Date: Sep 2008 Location: SE Coast Posts: 32	EZ wiring my 65 PU, Sorry worn out subject I have a 65 Short Fleet on a 60-? GMC? frame I think. It has rear leaf springs and a long serial # on the frame. It has a 69 - 350 w/ 70-? heads, hei ign. This is a real Frankenstein so you can imagine the wiring issues I am having with my EZ harness. I have searched here and found many resources, but I am still unsure about most of it. I am an electrical idiot. The main problems are: Do I use the original terminal block and horn relay (what wires?). The headlight switch and turn signals switch wires.. etc. Anyone have a new wiring map diagram? I am really sorry about posting a worn out topic. Anyone live near Gainesville FL to give me a lesson? Thanks! Last edited by guzzidude; 11-02-2008 at 10:59 PM.

11-02-2008, 10:37 PM	#2
PrerunnerRob Registered User Join Date: Jan 2007 Location: San Jose Posts: 847	Re: EZ wiring my 65 PU, Sorry worn out subject Here is a post with a 1964 diagram, it should be the same. Keep us all posted on how it goes!

11-03-2008, 01:17 AM	#3
guzzidude Registered User Join Date: Sep 2008 Location: SE Coast Posts: 32	Re: EZ wiring my 65 PU, Sorry worn out subject Thanks bob. I found that diagram and some stuff on the stovebolt page. I just don't know if I am supposed to use the original horn relay and voltage regulator with the kit. Do I need a terminal block? Thanks. I am starting to get the hang of it a little.

11-03-2008, 09:29 AM	#4
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: EZ wiring my 65 PU, Sorry worn out subject Does EZ have a horn relay elsewhere in the harness ? I did away with my stock horn relay, and ran a new one and two more for "full power" headlights. Cleans up that area a bit. I also used a one wire alternator, ran that wire to the starter terminal. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

11-03-2008, 10:16 AM	#5
guzzidude Registered User Join Date: Sep 2008 Location: SE Coast Posts: 32	Re: EZ wiring my 65 PU, Sorry worn out subject It has a horn relay that mounts near the panel. I just wanted to find out if the EZ horn relay bypasses that original horn relay clump? And I have the early alternator with the voltage block: F234. The Ez diagram shows the exciter wire splitting to # 3 and 4 terminals and F and 2 are running to the alternator plug. And I assume Alt PWR Red comes from the fuse block? I have been figuring some things out staring at the diagrams and looking online, but I think I am making it complicated thinking I will do something terribly wrong, so I question my own thoughts... Aahhgg. Thanks!

11-03-2008, 07:12 PM	#6
guzzidude Registered User Join Date: Sep 2008 Location: SE Coast Posts: 32	Re: EZ wiring my 65 PU, Sorry worn out subject I am starting to get it. Should I use the voltage regulator and how is that wired if so? It it missing the neutral safety switch, do I need to get another one? Thanks gents. Attached Images Last edited by guzzidude; 11-03-2008 at 07:20 PM.

11-03-2008, 08:50 PM	#7
Rogue 64 Ol' Blue Viking Join Date: Nov 2006 Location: north of Baton Rouge Posts: 172	Re: EZ wiring my 65 PU, Sorry worn out subject Hey, you stole my mutt! __________________ Driving Paw-paws truck into the Sunset!

11-04-2008, 09:19 AM	#9
Rogue 64 Ol' Blue Viking Join Date: Nov 2006 Location: north of Baton Rouge Posts: 172	Re: EZ wiring my 65 PU, Sorry worn out subject Mine is Beauregard, but we call him Beaux. He is a rescue, and 3 years this week. Note! White dogs are not good shop dogs. __________________ Driving Paw-paws truck into the Sunset!

11-04-2008, 11:32 AM	#10
ChopperDr Registered User Join Date: Feb 2008 Location: WA Posts: 189	Re: EZ wiring my 65 PU, Sorry worn out subject Thats a great looking dog. Chop

11-06-2008, 11:14 PM	#11
guzzidude Registered User Join Date: Sep 2008 Location: SE Coast Posts: 32	Re: EZ wiring my 65 PU, Sorry worn out subject What terminals are used on the neutral safety switch? There are four on mine.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.