'63 C-20 Rolling Chassis...Parting out !! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ChiefRocka** · 12-24-2008, 10:05 AM

I am parting this Chassis of all unwanted parts.

Basically, I am keeping the following:

The chassis; the trailing arms; the lower a-arms; the wheels; and the tailgate....THE REST CAN GO !!!

Here are some pics:
-

-

-
-

**ChiefRocka** · 12-24-2008, 10:07 AM

Few more pics:
-

-

-
The following is available for sale:
-
1) Complete rear axle $75
2) Rear Coils $35 pr
3) PanHard $20
4) HD rear Bumper $40
5) Tranny Crossmember-Bellhousing $30
6) Front C-20 Brakes/Hubs/Spindles $40 pr
7) Upper A-arms $30pr
8) steering box $30
9) steering linkage $20
10) Both 8&9 $40
11) two-piece driveline $40
12) spare-tire mount $40

All the above prices are of course "OBO"....and plus shipping, of course.

If your just looking for say 'drums' for example, I will seperate, but prefer to sell together.

The exhaust system is still intact and in decent shape.....free
Please email me if interested...serious only please !!!!!
I'm keeping the chassis, trailing arms, lower a-arms, wheels and tires and the tailgate.
If you need something else that I didn't list as a keeper, let me know....
Thanks

Later...

**ChiefRocka** · 02-08-2009, 02:19 PM

Stuff is still available.....

valero · 02-10-2009, 04:29 PM

Quote:

Originally Posted by ChiefRocka

Stuff is still available.....

lol...whatup john...lookin for parts and saw this post...

do these parts fit the 66?

joe231 · 02-10-2009, 05:00 PM

bring it to ok when you come to the ok meet in may

j/p

**ChiefRocka** · 02-19-2009, 09:38 AM

Quote:

Originally Posted by valero

lol...whatup john...lookin for parts and saw this post...

do these parts fit the 66?

What you looking for buddy ??

Quote:

Originally Posted by joe231

bring it to ok when you come to the ok meet in may

j/p

I'll start pushing it right now....

valero · 02-19-2009, 10:37 AM

[QUOTE=ChiefRocka;3153475]What you looking for buddy ??

mainly the upper and lower A arms but your keepin those right?
otherwise...steering gearbox, inner outter tie rods...mainly any steering or front suspension components that arent rusted through like everything on my poor girl, lol...

**ScottH** · 02-19-2009, 11:11 AM

chief, I'm still looking for a fleetside front bed panel.

Thanks.

Scott

**ChiefRocka** · 02-19-2009, 11:16 AM

[quote=valero;3153571]

Quote:

Originally Posted by ChiefRocka

What you looking for buddy ??

mainly the upper and lower A arms but your keepin those right?
otherwise...steering gearbox, inner outter tie rods...mainly any steering or front suspension components that arent rusted through like everything on my poor girl, lol...

I'm selling all the steering, and the upper a-arms....

Quote:

Originally Posted by ScottH

chief, I'm still looking for a fleetside front bed panel.

Thanks.

Scott

Hmmm, I though you were going aftermarket ?? You mentioned after shipping costs, you would probalby go that way ???

You still looking for an original piece then ??

joe231 · 02-20-2009, 12:39 AM

Quote:

Originally Posted by ChiefRocka

I'll start pushing it right now....

i'll meet ya in Albuquerque and help push

valero · 02-20-2009, 01:12 AM

[QUOTE=ChiefRocka;3153624][quote=valero;3153571]

I'm selling all the steering, and the upper a-arms....

ok...i saw the pictures but cant really tell the condition of the steering box or the other steering components...i assume theyre in pretty good shape? the upper a-arms look pretty decent/in tact from what i can see...

id like to pick as much up from you as possible bein that theyll fit on my truck and remain solid...

if its not too much trouble, is there any chance you could shoot me a total for all the steering parts and a arms with shipping???

thanks john!

**ChiefRocka** · 02-20-2009, 09:57 AM

Well, the pics are no problem....

I guess I'd have to diassemble everything, to get weights on everything to give you correct amounts.

Hmmm.....

valero · 02-20-2009, 10:35 AM

Quote:

Originally Posted by ChiefRocka

Well, the pics are no problem....

I guess I'd have to diassemble everything, to get weights on everything to give you correct amounts.

Hmmm.....

lol...sounds like a pain in the ass

...no worries man, i know your busy, and if you dont have time or you dont think its is worth goin through the trouble...i understand completely

but, if you get around to it, let me know and hopefully we can work somethin out

also, if you want...the 2 things i need the most are the a arms and the steering box, if its in good shape...i can get a complete steering rebuild kit from CPP for a pretty decent price...save you some time tryin to get everything apart and weighed...up to you, let me know

sean

12-24-2008, 10:05 AM	#1
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	'63 C-20 Rolling Chassis...Parting out !! I am parting this Chassis of all unwanted parts. Basically, I am keeping the following: The chassis; the trailing arms; the lower a-arms; the wheels; and the tailgate....THE REST CAN GO !!! Here are some pics: - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

12-24-2008, 10:07 AM	#2
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '63 C-20 Rolling Chassis...Parting out !! Few more pics: - - - - - - - The following is available for sale: - 1) Complete rear axle $75 2) Rear Coils $35 pr 3) PanHard $20 4) HD rear Bumper $40 5) Tranny Crossmember-Bellhousing $30 6) Front C-20 Brakes/Hubs/Spindles $40 pr 7) Upper A-arms $30pr 8) steering box $30 9) steering linkage $20 10) Both 8&9 $40 11) two-piece driveline $40 12) spare-tire mount $40 All the above prices are of course "OBO"....and plus shipping, of course. If your just looking for say 'drums' for example, I will seperate, but prefer to sell together. The exhaust system is still intact and in decent shape.....free Please email me if interested...serious only please !!!!! I'm keeping the chassis, trailing arms, lower a-arms, wheels and tires and the tailgate. If you need something else that I didn't list as a keeper, let me know.... Thanks Later... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

02-08-2009, 02:19 PM	#3
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '63 C-20 Rolling Chassis...Parting out !! Stuff is still available..... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

02-10-2009, 05:00 PM	#5
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '63 C-20 Rolling Chassis...Parting out !! bring it to ok when you come to the ok meet in may j/p __________________ *CHEVY ONLY*

02-19-2009, 10:37 AM	#7
valero Registered User Join Date: Jan 2009 Location: chicago, il. Posts: 217	Re: '63 C-20 Rolling Chassis...Parting out !! [QUOTE=ChiefRocka;3153475]What you looking for buddy ?? mainly the upper and lower A arms but your keepin those right? otherwise...steering gearbox, inner outter tie rods...mainly any steering or front suspension components that arent rusted through like everything on my poor girl, lol...

02-19-2009, 11:11 AM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: '63 C-20 Rolling Chassis...Parting out !! chief, I'm still looking for a fleetside front bed panel. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-20-2009, 01:12 AM	#11
valero Registered User Join Date: Jan 2009 Location: chicago, il. Posts: 217	Re: '63 C-20 Rolling Chassis...Parting out !! [QUOTE=ChiefRocka;3153624][quote=valero;3153571] I'm selling all the steering, and the upper a-arms.... ok...i saw the pictures but cant really tell the condition of the steering box or the other steering components...i assume theyre in pretty good shape? the upper a-arms look pretty decent/in tact from what i can see... id like to pick as much up from you as possible bein that theyll fit on my truck and remain solid... if its not too much trouble, is there any chance you could shoot me a total for all the steering parts and a arms with shipping??? thanks john!

02-20-2009, 09:57 AM	#12
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '63 C-20 Rolling Chassis...Parting out !! Well, the pics are no problem.... I guess I'd have to diassemble everything, to get weights on everything to give you correct amounts. Hmmm..... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 02-20-2009 at 09:57 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.