Porterbuilt Dropmembers & 22's on my 77 Ebay truck - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Breeze454 · 12-16-2008, 08:17 PM

Bone stock layed out, absolutely sic, love it!!!

crawdadfox · 12-19-2008, 09:18 PM

I have had a few people ask about the C.V style driveshaft. It's basically a double u-joint set up that can take more angle and not bind up like the stock single u-joint. Most lifted 4x4 guys use c.v's on front drive shafts due to the angle and short length. With around 12"-14" of total drop, it was one way to get around driveshaft bind at full dump.

Izzy · 12-19-2008, 09:33 PM

Damn that's a sexy rig.

SCOTI · 12-19-2008, 11:28 PM

Quote:

Originally Posted by Izzy

Damn that's a sexy rig.

Wow.... This truck is bringing them out of the woodwork. Haven't seen you on here in quite a while.

**N2TRUX** · 12-19-2008, 11:46 PM

Izzy? Izzy who....

**lolife99** · 12-20-2008, 03:05 AM

Crawdad,... save those part numbers,... I'll need the same stuff.

SCOTI · 12-20-2008, 09:37 AM

Quote:

Originally Posted by lolife99

Crawdad,... save those part numbers,... I'll need the same stuff.

What are we..... 'chopped liva' ??

copperchevy · 12-20-2008, 11:18 PM

It was shortened, right? Going to the local driveshaft shop and ask about this double joint set up. Mine has a little vibration at full dump.

NEVERENOUGH · 12-21-2008, 11:02 AM

I have got to say that is one of the sikkest square body trucks I have ever seen period. You now have me rethinking the prerunner me and the son were going to start building out of a 77 thanks alot.

csbatey · 12-21-2008, 11:35 AM

were did you get your double u joint what did it cost thanks chris

crawdadfox · 12-21-2008, 11:58 AM

Our local driveline shop was able to do the job at $375.00. The c.v yoke for a turbo 350 part #3103-27cv, the weld yoke for the driveshaft is #2-28-3817x, the center yoke for the c.v is # 7-0082 and the c.v yoke is part # 2-26-507. I went ahead and changed the rear joint as well, all three u- joints are the same...part #1-0153 The rear u-joint will be different if you have a 10 bolt, but all the other numbers will be the same (as long as you have a 2 3/4" diameter drive shaft tube) All these part numbers will cross to Spicer part #'s. So you should have about $295.00 in parts and $80.00 in labor...but being able to hook up your driveshaft....priceless!!

crawdadfox · 12-21-2008, 12:04 PM

Quote:

Originally Posted by NEVERENOUGH

I have got to say that is one of the sikkest square body trucks I have ever seen period. You now have me rethinking the prerunner me and the son were going to start building out of a 77 thanks alot.

Thanks, and if i can "help" you with anything else let me know!

Prerunners are very cool, but...you dont have to jump to get in the lowered stuff!!

Izzy · 12-21-2008, 11:24 PM

Quote:

Originally Posted by SCOTI

Wow.... This truck is bringing them out of the woodwork. Haven't seen you on here in quite a while.

Quote:

Originally Posted by N2TRUX

Izzy? Izzy who....

I should have a good and low mid 80's Sierra by Feb, gotta play catch up on what you guys are doing now.

crawdadfox · 12-23-2008, 10:21 PM

Quote:

Originally Posted by Izzy

I should have a good and low mid 80's Sierra by Feb, gotta play catch up on what you guys are doing now.

Hey Izzy, what ya got in the works....i like the "good and low" part !! Thanks for the compliments!

72BlckButy · 12-23-2008, 10:26 PM

Okay crawdad, where are the new pics with the white sport bumper mounted???

I hope the weather is treating you well down south so you can drive that thing.

Happy holidays to you and your family!

joe231 · 12-23-2008, 10:26 PM

Izzy, is that vanilla ice in your avy?

bigblock73 · 12-23-2008, 10:35 PM

Izzy IS Vanilla Ice...

Welcome back to the forum...are you going to share some pics with us...or make us wait?

crawdadfox · 12-23-2008, 11:04 PM

Quote:

Originally Posted by 72BlckButy

Okay crawdad, where are the new pics with the white sport bumper mounted???

I hope the weather is treating you well down south so you can drive that thing.

Happy holidays to you and your family!

Paint is still a little tacky! I will drag the old heap out and throw it on this week! As far as the weather.....79 and SUNNY...(sorry yank's!!) Merry Christmas to y'all, i'll be thinkin' bout ya when we boil the fresh 16 count (16 to the pound!) shrimp up for X-mas dinner...who needs a turkey?!

72BlckButy · 12-23-2008, 11:10 PM

Quote:

Originally Posted by crawdadfox

Paint is still a little tacky! I will drag the old heap out and throw it on this week! As far as the weather.....79 and SUNNY...(sorry yank's!!) Merry Christmas to y'all, i'll be thinkin' bout ya when we boil the fresh 16 count (16 to the pound!) shrimp up for X-mas dinner...who needs a turkey?!

Well so you so you know I'm looking forward to seeing you roll up with your cooler in the back at the next GoodGuy's event.

Izzy · 12-23-2008, 11:12 PM

Quote:

Originally Posted by crawdadfox

Hey Izzy, what ya got in the works....i like the "good and low" part !! Thanks for the compliments!

An 83 that's currently lays LCA, hopefully frame later with one of the porterbuilt dropmembers.

Izzy · 12-23-2008, 11:13 PM

Quote:

Originally Posted by bigblock73

Izzy IS Vanilla Ice...

Welcome back to the forum...are you going to share some pics with us...or make us wait?

I will post pics when i make the trade in Feb. I have to get the motor rebuilt in the wifes '05 Silvy first unfortunately.

crawdadfox · 12-27-2008, 11:29 AM

Heres a couple pics. of my L.M.C "Poverty" rear sport bumper! Still need to make a couple adjustments, but was very satisfied in the fit.

tvblazer78 · 12-27-2008, 11:51 AM

Looks cool.. I love that look with the white, you just don't see that..

**N2TRUX** · 12-27-2008, 11:54 AM

Man that thing sit right. Even though it's on the ground it still has a little hotrod rake. I love em low, but they still need some rake to emit that cocky hotrod attitude.

The poverty bumpers work with the theme, but I think chrome would set it off.

joe231 · 12-27-2008, 12:25 PM

<--digging the white

12-16-2008, 08:17 PM	#76
Breeze454 Registered User Join Date: Oct 2008 Location: North Florida Posts: 100	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Bone stock layed out, absolutely sic, love it!!!

12-19-2008, 09:18 PM	#77
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck I have had a few people ask about the C.V style driveshaft. It's basically a double u-joint set up that can take more angle and not bind up like the stock single u-joint. Most lifted 4x4 guys use c.v's on front drive shafts due to the angle and short length. With around 12"-14" of total drop, it was one way to get around driveshaft bind at full dump. Attached Images

12-19-2008, 09:33 PM	#78
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Damn that's a sexy rig.

12-19-2008, 11:46 PM	#80
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Izzy? Izzy who.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

12-20-2008, 03:05 AM	#81
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Crawdad,... save those part numbers,... I'll need the same stuff. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-20-2008, 11:18 PM	#83
copperchevy Registered User Join Date: Sep 2007 Location: Tyler, Texas Posts: 220	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck It was shortened, right? Going to the local driveshaft shop and ask about this double joint set up. Mine has a little vibration at full dump. __________________ Mexican

12-21-2008, 11:02 AM	#84
NEVERENOUGH Registered User Join Date: Jul 2004 Location: Chino Valley Az Posts: 210	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck I have got to say that is one of the sikkest square body trucks I have ever seen period. You now have me rethinking the prerunner me and the son were going to start building out of a 77 thanks alot.

12-21-2008, 11:35 AM	#85
csbatey Registered User Join Date: Dec 2006 Location: nash,TN Posts: 218	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck were did you get your double u joint what did it cost thanks chris __________________ bagged 87

12-21-2008, 11:58 AM	#86
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Our local driveline shop was able to do the job at $375.00. The c.v yoke for a turbo 350 part #3103-27cv, the weld yoke for the driveshaft is #2-28-3817x, the center yoke for the c.v is # 7-0082 and the c.v yoke is part # 2-26-507. I went ahead and changed the rear joint as well, all three u- joints are the same...part #1-0153 The rear u-joint will be different if you have a 10 bolt, but all the other numbers will be the same (as long as you have a 2 3/4" diameter drive shaft tube) All these part numbers will cross to Spicer part #'s. So you should have about $295.00 in parts and $80.00 in labor...but being able to hook up your driveshaft....priceless!!

12-23-2008, 10:26 PM	#90
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Okay crawdad, where are the new pics with the white sport bumper mounted??? I hope the weather is treating you well down south so you can drive that thing. Happy holidays to you and your family! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 12-23-2008 at 10:26 PM.

12-23-2008, 10:26 PM	#91
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Izzy, is that vanilla ice in your avy? __________________ *CHEVY ONLY*

12-23-2008, 10:35 PM	#92
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Izzy IS Vanilla Ice... Welcome back to the forum...are you going to share some pics with us...or make us wait? __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

12-27-2008, 11:29 AM	#97
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Heres a couple pics. of my L.M.C "Poverty" rear sport bumper! Still need to make a couple adjustments, but was very satisfied in the fit. Attached Images

12-27-2008, 11:51 AM	#98
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Looks cool.. I love that look with the white, you just don't see that.. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

12-27-2008, 11:54 AM	#99
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Man that thing sit right. Even though it's on the ground it still has a little hotrod rake. I love em low, but they still need some rake to emit that cocky hotrod attitude. The poverty bumpers work with the theme, but I think chrome would set it off. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"



Register or Log In To remove these advertisements.

12-27-2008, 12:25 PM	#100
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck <--digging the white __________________ *CHEVY ONLY*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.