Engine bay pics - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

truckdrivinsob · 12-28-2008, 07:20 PM

Not to hijack a thread but, what did you all do with your big old heater boxes? All i see is two copper lines out of the firewall. Looks a lot better!

LuckyHenriksen · 12-28-2008, 07:40 PM

ssman that turbo set up is off the hook! does it put down big numbers and perform well or just look pretty?

64Magoo · 12-28-2008, 07:46 PM

Quote:

Originally Posted by ssman

Mine has the original crayon marks on the firewall so i decided to keep it all original...

More info and pics of this truck???

ssman · 12-28-2008, 08:27 PM

its a Dart spayed cap block with all the good internals. Accel GEN VII FMU A/C 4L80E automatic overdrive with TCI programmer and paddle shifters. I have a new dash setup to install yet. I drive it every day and tow my 57 nomad with it. It makes the power. Pretty much it just depends on how much boost i'm running. I run it at 12 lbs everyday and its mild mannered and runs on 93 octane. Its fun to spank a new vette or viper . The hardest part is even getting them to notice you at a light !!! it had its first repaint last year. Used PPG base clear with 50% flattining agent . I LOVE IT !! I think it makes at least 300 hp.... He He...

ssman · 12-28-2008, 08:34 PM

heres a couple more

*project 67 sub* · 12-29-2008, 12:43 AM

Quote:

Originally Posted by ssman

Mine has the original crayon marks on the firewall so i decided to keep it all original...

man all i got to say is that sure is beautiful engine

LuckyHenriksen · 12-29-2008, 12:54 AM

Man that is one HOT setup!

I love the look, and the fact that it has twins under the hood makes me drool!!! I really like the new gauge setup, looks like an airplane cockpit. Any info on it and how it was made would be cool. Oh and did you fab up that turbo setup your self or was it a kit? Looks great!

joe231 · 12-29-2008, 01:47 AM

beautiful sub ssman!

**ChiefRocka** · 12-29-2008, 09:27 AM

Quote:

Originally Posted by 1Bad62Pro/Street

"Flame on Chief!"

You need a Flame Thrower Kit on Her!
Light up the Night!

Thinking about it...

protrash64 · 12-29-2008, 02:58 PM

Just noticed that the "ChiefRocka" truck is so cool he doesnt even run a fan!!! ........damn!!!!!!

ApeKing · 12-29-2008, 03:06 PM

She is a little rough but she is mine!

FreeRideYZ250 · 12-30-2008, 12:19 AM

Not in my engine bay yet, but will be soon!

ol Curt · 12-30-2008, 12:48 AM

Mine

Name: DSCF0229.jpg
Views: 536
Size: 43.4 KB

My Buddies...what can I say, he has money, I don't!

rayce08 · 12-30-2008, 10:54 AM

ol curt , looks like your buddy went alittle crazy with the blue , sometimes you can go to far . probably a sweet truck through .

joe231 · 12-30-2008, 12:16 PM

Quote:

Originally Posted by rayce08

ol curt , looks like your buddy went alittle crazy with the blue , sometimes you can go to far . probably a sweet truck through .

that sir, is your opinion......

**scotts62** · 12-30-2008, 12:36 PM

No kidding, id sport it out all over town!! Thats clean

MacAttack · 12-30-2008, 01:20 PM

Quote:

Originally Posted by rayce08

ol curt , looks like your buddy went alittle crazy with the blue

A little?

1Bad62Pro/Street · 12-30-2008, 01:43 PM

Engine Bays look good fellas! Question: Does anyone have front custom inner fender wells made/fabricated? Been needing some made for a while now. Have made a cardboard template made before, but can't find it. If any of ya fellars on here have any made; just show me a couple of pics so I can get an idea. The front clip is a 73 Mustang IFS. Thank ya! Per-shate! Git-R-Done
as Larry the Cable guys says. . .
-------»

Quote:

Originally Posted by 1Bad62Pro/Street

She ain't much to look at! Little Ole' 355 with a mild/slightly wild cam.
Still under construction.......
Sorry about the Extra Large Pictures!!! Didn't do it on Purpose!
And yes I have a Aooga Horn

MacAttack · 12-30-2008, 01:45 PM

Need to make those pics bigger!

1Bad62Pro/Street · 12-30-2008, 01:52 PM

Quote:

Originally Posted by MacAttack

Need to make those pics bigger!

------»
Ha ha
I hear ya holmes! As stated before: I did'nt do it on purpose.

joe231 · 12-30-2008, 02:44 PM

geeez man, have you thought of fixing them instead of posting them everywhere?

**scotts62** · 12-30-2008, 03:58 PM

(image resizer)

Fuel filters dirty

I wouldn't be able to see it but the pics are like BAM!!

j/k dude. I did it too until joe yelled at me and emailed me the image resizer

Lookin good!

joe231 · 12-30-2008, 06:16 PM

don't take it personally, I yell at everyone

ApeKing · 12-30-2008, 08:15 PM

Quote:

Originally Posted by truckdrivinsob

Not to hijack a thread but, what did you all do with your big old heater boxes? All i see is two copper lines out of the firewall. Looks a lot better!

Ditto

ol Curt · 12-30-2008, 08:25 PM

Quote:

Originally Posted by rayce08

ol curt , looks like your buddy went a little crazy with the blue , sometimes you can go to far . probably a sweet truck through .

Yeah, maybe a bit much blue, but pretty none the less. It will be in the March issue of Classic Truck Magazine.

12-28-2008, 07:20 PM	#26
truckdrivinsob Gear Jammer Join Date: May 2007 Location: Myrtle creek OR Posts: 221	Re: Engine bay pics Not to hijack a thread but, what did you all do with your big old heater boxes? All i see is two copper lines out of the firewall. Looks a lot better!

12-28-2008, 07:40 PM	#27
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Engine bay pics ssman that turbo set up is off the hook! does it put down big numbers and perform well or just look pretty? __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-28-2008, 08:27 PM	#29
ssman Registered User Join Date: Feb 2008 Location: sarasota florida Posts: 18	Re: Engine bay pics its a Dart spayed cap block with all the good internals. Accel GEN VII FMU A/C 4L80E automatic overdrive with TCI programmer and paddle shifters. I have a new dash setup to install yet. I drive it every day and tow my 57 nomad with it. It makes the power. Pretty much it just depends on how much boost i'm running. I run it at 12 lbs everyday and its mild mannered and runs on 93 octane. Its fun to spank a new vette or viper . The hardest part is even getting them to notice you at a light !!! it had its first repaint last year. Used PPG base clear with 50% flattining agent . I LOVE IT !! I think it makes at least 300 hp.... He He... Attached Images

12-28-2008, 08:34 PM	#30
ssman Registered User Join Date: Feb 2008 Location: sarasota florida Posts: 18	Re: Engine bay pics heres a couple more Attached Images

12-29-2008, 12:54 AM	#32
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Engine bay pics Man that is one HOT setup! I love the look, and the fact that it has twins under the hood makes me drool!!! I really like the new gauge setup, looks like an airplane cockpit. Any info on it and how it was made would be cool. Oh and did you fab up that turbo setup your self or was it a kit? Looks great! __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-29-2008, 01:47 AM	#33
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Engine bay pics beautiful sub ssman! __________________ *CHEVY ONLY*

12-29-2008, 02:58 PM	#35
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Engine bay pics Just noticed that the "ChiefRocka" truck is so cool he doesnt even run a fan!!! ........damn!!!!!! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

12-29-2008, 03:06 PM	#36
ApeKing Trailers are for BOATS! Join Date: Dec 2008 Location: Douglasville Georgia Posts: 208	Re: Engine bay pics She is a little rough but she is mine! __________________ The Rod Barons C.C. CSA Last edited by ApeKing; 12-29-2008 at 03:07 PM.

12-30-2008, 12:19 AM	#37
FreeRideYZ250 Registered User Join Date: Oct 2008 Location: Phoenix, AZ Posts: 67	Re: Engine bay pics Not in my engine bay yet, but will be soon! Attached Images

12-30-2008, 12:48 AM	#38
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Engine bay pics Mine My Buddies...what can I say, he has money, I don't! Attached Images

12-30-2008, 10:54 AM	#39
rayce08 Registered User Join Date: Apr 2008 Location: semmes alabama Posts: 50	Re: Engine bay pics ol curt , looks like your buddy went alittle crazy with the blue , sometimes you can go to far . probably a sweet truck through . __________________ 66 swb fleetside restomod Last edited by rayce08; 12-30-2008 at 10:55 AM.

12-30-2008, 12:36 PM	#41
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Engine bay pics No kidding, id sport it out all over town!! Thats clean __________________ Scott 93 crew cab build Project 62

12-30-2008, 01:45 PM	#44
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Engine bay pics Need to make those pics bigger! __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

12-30-2008, 02:44 PM	#46
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Engine bay pics geeez man, have you thought of fixing them instead of posting them everywhere? __________________ *CHEVY ONLY*

12-30-2008, 03:58 PM	#47
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Engine bay pics (image resizer) Fuel filters dirty I wouldn't be able to see it but the pics are like BAM!! j/k dude. I did it too until joe yelled at me and emailed me the image resizer Lookin good! __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 12-30-2008 at 04:00 PM. Reason: added



Register or Log In To remove these advertisements.

12-30-2008, 06:16 PM	#48
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Engine bay pics don't take it personally, I yell at everyone __________________ *CHEVY ONLY*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.